References
- Andersson C-G and Andrews R E: ‘Fabrication of containment canisters for nuclear waste by friction stir welding’. 1 st International Symposium on Friction Stir Welding, June 1999, Thousand Oaks, CA, USA (CD-ROM).
- Andersson C-G et al : ‘A comparison of copper canister fabrication by electron beam and friction stir processes’. 2 nd Inter-national Symposium on Friction Stir Welding, June 2000, Gothenburg, Sweden.
- Cederqvist L and Andrews R E: ‘A weld that lasts for 100 000 years: FSW of copper canisters’. 4 th International Symposium on Friction Stir Welding, April 2003, Park City, Utah, USA (CD-ROM).
- Kallgren T and Sandström R: ‘Microstructure and temperature dependence in copper welded by the FSW process’. 4 th International Symposium on Friction Stir Welding, April 2003, Park City, Utah, USA (CD-ROM).
- Cederqvist L et al : ‘FSW to seal 50 mm thick copper canisters – a weld that lasts for 100 000 years’. 5 th International Symposium on Friction Stir Welding, September 2004, Metz, France (CD-ROM).
- Kallgren T et al : ‘Finite element modelling of friction stir welding on copper canisters’. 5 th International Symposium on Friction Stir Welding, September 2004, Metz, France (CD-ROM).
- Okamoto K et al : ‘Fabrication of backing plates of copper alloy by friction stir welding’. 3 rd International Symposium on Friction Stir Welding, September 2001, Kobe, Japan.
- ‘Hitachi wrought copper: Present status of high-performance, high-precision joining of copper by friction stir welding’. Welding Technique 2001 49 ( 9 ) 108 –111.
- Bang K-S et al : ‘Study on weldability of Cu (OFC) by friction stir welding’. Proc International Welding/Joining Conf, Korea 2002, October 28–30, 2002, Gyeongju, Korea, 522–527.
- Park H S et al : ‘Microstructures and mechanical properties of friction stir welds of 60%Cu–40%Zn copper alloy’. Mat Sci Engng A 2004 ( 371 ) 160 –169.
- Savolainen K et al : ‘Friction stir weldability of copper alloys’. 5 th International Symposium on Friction Stir Welding, September 2004, Metz, France (CD-ROM).
- Murr L E et al : ‘Interaction vortices and related microstructural features in the friction stir welding of dissimilar metals’. Materials Research Innovations 1998 2 ( 3 ) 150 –163.
- Murr L E et al : ‘Microstructures in friction stir welded metals’. J Materials Processing and Manufacturing Science 1998 7 ( 2 ) 145 –161.
- Mahoney M W et al : ‘Microstructural modification and re-sultant properties of friction stir processed cast NiAl bronze’. Materials Science Forum 2003 426 –432, 2843–2848.
- Oishi K et al : ‘The influence of friction stir processing on microstructure and properties of a cast nickel–aluminium bronze material’. Materials Science Forum 2003 426 –432, 2885–2890.
- Palko W A et al : ‘Investigation of use of friction stir processing to repair and locally enhance the properties of large NiAl bronze propellers’. Materials Science Forum 2003 426 –432, 2909–2914.
- Lynch S P et al : ‘Friction stir processing of a high-damping MN–Cu alloy used for marine propellers’. Materials Science Forum 2003 426 –432, 2903–2908.
- Nakata K et al : ‘Weldability of high-strength aluminium alloys by friction stir welding’. ISIJ (Iron and Steel Institute of Japan) International 2000 40 S15 –S19.