Fatigue Failure Load of Molars with Thin-Walled Prosthetic Crowns Made of Various Materials: A 3D-FEA Theoretical Study

References

• Rosenstiel SF, Land MF, Fujimoto J. Contemporary Fixed Prosthodontics. St. Louis, MO: Mosby; 2001:262–271.
   Google Scholar
• Sjogren G, Sletten G, Dahl JE. Cytotoxicity of dental alloys, metals, and ceramics assessed by millipore filter, agar overlay, and MTT tests. J Prosthet Dent. 2000;84:229–236. doi:10.1067/mpr.2000.107227
   PubMed Web of Science ®Google Scholar
• Siervo S, Pampalone A, Siervo P, et al. Where is the gap? Machinable ceramic systems and conventional laboratory restorations at a glance. Quintessence Int. 1994;25:773–779.
   Google Scholar
• Blatz MB. Long–term clinical success of all–ceramic posterior restorations. Quintessence Int. 2002;33:415–426.
   PubMed Web of Science ®Google Scholar
• Chen C, Trindade FZ, de Jager N, Kleverlaan CJ, Feilzer AJ. The fracture resistance of a CAD/CAM Resin Nano Ceramic (RNC) and a CAD ceramic at different thicknesses. Dent Mater. 2014;30:954–962. doi:10.1016/j.dental.2014.05.018
   PubMed Web of Science ®Google Scholar
• Li Y, Chen J, Liu J, Zhang L, Wang W, Zhang S. Estimation of the reliability of all-ceramic crowns using finite element models and the stress–strength interference theory. Comput Biol Med. 2013;43:1214–1220. doi:10.1016/j.compbiomed.2013.06.007
   PubMed Web of Science ®Google Scholar
• Pjetursson BE, Sailer I, Zwahlen M, Hammerle CH. A systematic review of the survival and complication rates of all-ceramic and metal ceramic reconstructions after an observation period of at least 3 years. Part I: single crowns. Clin Oral Implants Res. 2007;18(3):73–85. doi:10.1111/j.1600-0501.2007.01467.x
   Web of Science ®Google Scholar
• Denry I, Kelly JR. State of the art of zirconia for dental applications. Dent Mater. 2008;24(3):299–307. doi:10.1016/j.dental.2007.05.007
   PubMed Web of Science ®Google Scholar
• Guess PC, Silva NR, Bonfante EA, Coelho PG, Thompson VP. Monolithic CAD/CAM lithium disilicate versus veneered Y-TZP crowns: comparison of failure modes and reliability after fatigue. Int J Prosthodont. 2010;23:434–442.
   PubMed Web of Science ®Google Scholar
• Rekow ED, Silva N, Coelho PG, Zhang Y, Guess P, Thompson VP. Performance of dental ceramics: challenges for improvements. J Dent Res. 2011;90:937–952. doi:10.1177/0022034510391795
   PubMed Web of Science ®Google Scholar
• Lung CYK, Botelho MG, Heinonen M, Matinlinna JP. Resin zirconia bonding promotion with some novel coupling agents. Dent Mater. 2012;28:863–872.
   Web of Science ®Google Scholar
• Biscaro L, Bonfiglioli R, Soattin M, Vigolo P. An in vivo evaluation of fit of zirconium-oxide based ceramic single crowns, generated with two CAD/CAM systems, in comparison to metal ceramic single crowns. J Prosthodont. 2013;22:36–41. doi:10.1111/j.1532-849X.2012.00907.x
   Google Scholar
• Chu SJ. Current clinical strategies with lithium-disilicate restorations. Compend Contin Educ Dent. 2012;33:64–67.
   Google Scholar
• Tan PL, Dunne JT. An esthetic comparison of a metal ceramic crown and cast metal abutment with an all-ceramic crown and zirconia abutment: a clinical report. J Prosthet Dent. 2004;91:215–218. doi:10.1016/j.prosdent.2003.12.024
   PubMed Web of Science ®Google Scholar
• Kosmac T, Oblakb C, Jevnikarb P, Fundukb N, Marion L. The effect of surface grinding and sandblasting on flexural strength and reliability of Y-TZP zirconia ceramic. Dent Mater. 1999;15:426–433. doi:10.1016/S0109-5641(99)00070-6
   PubMed Web of Science ®Google Scholar
• Al-Dohan HM, Yaman P, Dennison JB, Razzoog ME, Lang BR. Shear strength of core-veneer interface in bi-layered ceramics. J Prosthet Dent. 2004;91:349–355. doi:10.1016/j.prosdent.2004.02.009
   PubMed Web of Science ®Google Scholar
• Junctive N, Sirisathit I. Marginal accuracy of computer-aided design- and computer-aided manufacturing-fabricated full-arch zirconia restoration. Clin Cosmet Investig Dent. 2018;15(10):9–17.
   Google Scholar
• Millen CS, Reuben RL, Ibbetson RJ. The effect of coping/veneer thickness on the fracture toughness and residual stress of implant supported, cement retained zirconia and metal ceramic crowns. Dent Mater. 2012;28(10):e250–e258. doi:10.1016/j.dental.2012.06.008
   Web of Science ®Google Scholar
• White SN, Miklus VG, McLaren EA, et al. Flexural strength of a layered zirconia and porcelain dental all-ceramic system. J Prosthet Dent. 2005;94:125–131. doi:10.1016/j.prosdent.2005.05.007
   PubMed Web of Science ®Google Scholar
• Duan Y, Griggs JA. Effect of elasticity on stress distribution in CAD/CAM dental crowns: glass ceramic vs. polymer–matrix composite. J Dent. 2015;43:742–749. doi:10.1016/j.jdent.2015.01.008
   Web of Science ®Google Scholar
• Adolf D, Tribst JPM, Adolfi M, Dal Piva AMO, Saavedra GSFA, Bottino MA. Lithium disilicate crown, zirconia hybrid abutment and platform switching to improve the esthetics in anterior region: a case report. Clin Cosmet Investig Dent. 2020;19(12):31–40. doi:10.2147/CCIDE.S234980
   Web of Science ®Google Scholar
• Carvalho AO, Bruzi G, Giannini M, Magne P. Fatigue resistance of CAD/CAM complete crowns with a simplified cementation process. J Prosthet Dent. 2014;111:310–317. doi:10.1016/j.prosdent.2013.09.020
   PubMed Web of Science ®Google Scholar
• Alhasanyah A, Vaidyanathan T, Flinton R. Effect of core thickness differences on post-fatigue indentation fracture resistance of veneered zirconia crowns. J Prosthodont. 2013;22(5):383–390. doi:10.1111/jopr.12016
   Google Scholar
• Lameira DP, Buarque e Silva WA, Andrade e Silva F, De Souza GM. Fracture strength of aged monolithic and bilayer zirconia-based crowns. Biomed Res Int. 2015;418641.
   Web of Science ®Google Scholar
• Podhorsky A, Rehmann P, Wöstmann B. Tooth preparation for full-coverage restorations—a literature review. Clin Oral Investig. 2015;19:959–996. doi:10.1007/s00784-015-1439-y
   Web of Science ®Google Scholar
• Jalalian E, Atashkar B, Rostami R. The effect of preparation design on the fracture resistance of zirconia crown copings (computer associated design/computer associated machine, CAD/CAM system). J Dent (Tehran). 2011;8(3):123–129.
   Google Scholar
• Rosenstiel SF, Land MF, Fujimoto J. Contemporary Fixed Prosthodontics. 4th ed. St. Louis: Mosby Elsevier; 2006.
   Google Scholar
• Shillingburg HT, Hobo S, Whitsett LD, Jacobi R, Brackett SE. Fundamentals of Fixed Prosthodontics. 3rd ed. Carol Stream: Quintessence; 1997.
   Google Scholar
• Goodacre CJ, Campagni WV, Aquilino SA. Tooth preparations for complete crowns: an art form based on scientific principles. J Prosthet Dent. 2001;85(4):363–376. doi:10.1067/mpr.2001.114685
   PubMed Web of Science ®Google Scholar
• Parker MH, Calverley MJ, Gardner FM, Gunderson RB. New guidelines for preparation taper. J Prosthodont. 1993;2(1):61–66. doi:10.1111/j.1532-849X.1993.tb00383.x
   Google Scholar
• Weed RM, Baez RJ. A method for determining adequate resistance form of complete cast crown preparations. J Prosthet Dent. 1984;52(3):330–334. doi:10.1016/0022-3913(84)90437-2
   Web of Science ®Google Scholar
• Chan DC, Chung AK, Haines J, Yau EH, Kuo CC. The accuracy of optical scanning: influence of convergence and die preparation. Oper Dent. 2011;36(5):486–491. doi:10.2341/10-067-L
   Web of Science ®Google Scholar
• Chan DC, Wilson AH, Barbe P, Cronin RJ, Chung C, Chung K. Effect of preparation convergence on retention and seating discrepancy of complete veneer crowns. J Oral Rehabil. 2005;32(1):58–64. doi:10.1111/j.1365-2842.2004.01371.x
   PubMed Web of Science ®Google Scholar
• Wilson AH, Chan DC. The relationship between preparation convergence and retention of extracoronal retainers. J Prosthodont. 1994;3(2):74–78. doi:10.1111/j.1532-849X.1994.tb00132.x
   Google Scholar
• Corazza PH, Feitosa SA, Borges AL, Della Bona A. Influence of convergence angle of tooth preparation on the fracture resistance of Y-TZP-based all-ceramic restorations. Dent Mater. 2013;29(3):339–347. doi:10.1016/j.dental.2012.12.007
   Web of Science ®Google Scholar
• Proos KA, Swain MV, Ironside J, Steven GP. Influence of margin design and taper abutment angle on a restored crown of a first premolar using finite element analysis. Int J Prosthodont. 2003;16(4):442–449.
   Web of Science ®Google Scholar
• Sornsuwan T, Swain MV. The effect of margin thickness, degree of convergence and bonding interlayer on the marginal failure of glass-simulated all-ceramic crowns. Acta Biomater. 2012;8(12):4426–4437. doi:10.1016/j.actbio.2012.08.006
   Web of Science ®Google Scholar
• Boitelle P, Mawussi B, Tapie L, Fromentin O. A systematic review of CAD/CAM fit restoration evaluations. J Oral Rehabil. 2014;41(11):853–874.
   PubMed Web of Science ®Google Scholar
• Holmes JR, Bayne SC, Holland GA, Sulik WD. Considerations in measurement of marginal fit. J Prosthet Dent. 1989;62(4):405–408. doi:10.1016/0022-3913(89)90170-4
   Web of Science ®Google Scholar
• Anusavice JL, Shen C, Rawls HR. Philips Materiais Dentários. 12th ed. Rio de Janeiro: Elsevier; 2013.
   Google Scholar
• Nakamura K, Harada A, Inagaki R, et al. Fracture resistance of monolithic zirconia molar crowns with reduced thickness. Acta Odontol Scand. 2015;73:602–608. doi:10.3109/00016357.2015.1007479
   PubMed Web of Science ®Google Scholar
• Nakamura K, Mouhat M, Nergård JM, et al. Effect of cements on fracture resistance of monolithic zirconia crowns. Acta Biomater Odontol Scand. 2016;2:12–19. doi:10.3109/23337931.2015.1129908
   PubMedGoogle Scholar
• Sorrentino R, Triulzio C, Tricarico MG, Bonadeo G, Gherlone EF, Ferrari M. In vitro analysis of the fracture resistance of CAD-CAM monolithic zirconia molar crowns with different occlusal thickness. J Mech Behav Biomed Mater. 2016;61:328–333. doi:10.1016/j.jmbbm.2016.04.014
   PubMed Web of Science ®Google Scholar
• Thompson VP, Rekow DE. Dental ceramics and the molar crown testing ground. J Appl Oral Sci. 2004;12:26–36. doi:10.1590/S1678-77572004000500004
   PubMedGoogle Scholar
• Sun T, Zhou S, Lai R, et al. Load-bearing capacity and the recommended thickness of dental monolithic zirconia single crowns. J Mech Behav Biomed Mater. 2014;35:93–101. doi:10.1016/j.jmbbm.2014.03.014
   PubMed Web of Science ®Google Scholar
• Papia E, Larsson C, Du Toit M, Vult von Steyern P. Bonding between oxide ceramics and adhesive cement systems: a systematic review. J Biomed Mater Res B Appl Biomater. 2014;102:395–413. doi:10.1002/jbm.b.33013
   PubMed Web of Science ®Google Scholar
• Weigl P, Sander A, Wu Y, Rosentritt M, Lauer H, Rosentritt M. In-vitro performance and fracture strength of thin monolithic zirconia crowns. J Adv Prosthodont. 2018;10(2):79–84. doi:10.4047/jap.2018.10.2.79
   PubMed Web of Science ®Google Scholar
• Nihioka G, Prochnow C, Firmino A, et al. Fatigue strength of several dental ceramics indicated for CAD-CAM monolithic restorations. Braz Oral Res. 2018;11(32):53.
   Google Scholar
• Dejak B, Młotkowski A, Langot C. Three-dimensional finite element analysis of molars with thin-walled prosthetic crowns made of various materials. Dent Mater. 2012;28(4):433–441. doi:10.1016/j.dental.2011.11.019
   PubMed Web of Science ®Google Scholar
• Att W, Kurun S, Gerds T, Strub JR. Fracture resistance of single-tooth implant-supported all-ceramic restorations: an in vitro study. J Prosthet Dent. 2006;95:111–116. doi:10.1016/j.prosdent.2005.12.003
   PubMed Web of Science ®Google Scholar
• Ausiello P, Ciaramella S, Martorelli M, et al. Mechanical behavior of endodontically restored canine teeth: effects of ferrule, post material and shape. Dent Mater. 2017;33:1466–1472. doi:10.1016/j.dental.2017.10.009
   PubMed Web of Science ®Google Scholar
• Dal Piva AMO, Tribst JPM, Souza ROAE, Borges ALS. Influence of alveolar bone loss and cement layer thickness on the biomechanical behavior of endodontically treated maxillary incisors: a 3-dimensional finite element analysis. J Endod. 2017;43:791–795. doi:10.1016/j.joen.2016.11.020
   PubMed Web of Science ®Google Scholar
• Monteiro JB, Dal Piva AMO, Tribst JPM, Borges ALS, Tango RN. The effect of resection angle on stress distribution after root-end surgery. Iran Endod J. 2018;13:188–194.
   PubMedGoogle Scholar
• Ausiello P, Ciaramella S, Martorelli M, Lanzotti A, Gloria A, Watts DC. CAD-FE modeling and analysis of class II restorations incorporating resin-composite, glass ionomer and glass ceramic materials. Dent Mater. 2017;33:1456–1465. doi:10.1016/j.dental.2017.10.010
   PubMed Web of Science ®Google Scholar
• Santiago JF, Verri FR, Almeida DA, Souza Batista VE, Lemos CA, Pellizzer EP. Finite element analysis on influence of implant surface treatments, connection and bone types. Mater Sci Eng C Mater Biol Appl. 2016;63:292–300. doi:10.1016/j.msec.2016.02.061
   PubMed Web of Science ®Google Scholar
• Vichi A, Sedda M, Fonzar R, Carrabba M, Ferrari M. Comparison of contrast ratio, translucency parameter, and flexural strength of traditional and “augmented translucency” zirconia for CEREC CAD/CAM system. J Esthet Restor Dent. 2016;28:S32–S39. doi:10.1111/jerd.12172
   Web of Science ®Google Scholar
• Eazhil R, Swaminathan S, Madhan G, Kannan V, Alagesan C. Impact of implant diameter and length on stress distribution in osseointegrated implants: a 3D FEA study. J Int Soc Prev Commun Dent. 2016;6:590–596. doi:10.4103/2231-0762.195518
   PubMed Web of Science ®Google Scholar
• Batson ER, Cooper LF, Duqum I, Mendonça G. Clinical outcomes of three different crown systems with CAD/CAM technology. J Prosthet Dent. 2014;112:770–777.
   PubMed Web of Science ®Google Scholar
• Pieger S, Salman A, Bidra AS. Clinical outcomes of lithium disilicate single crowns and partial fixed dental prostheses: a systematic review. J Prosthet Dent. 2014;112(1):22–30. doi:10.1016/j.prosdent.2014.01.005
   PubMed Web of Science ®Google Scholar
• Fasbinder DJ, Dennison JB, Heys D, Neiva G. A clinical evaluation of chairside lithium disilicate CAD/CAM crowns: a two-year report. J Am Dent Assoc. 2010;141:10S–14S. doi:10.14219/jada.archive.2010.0355
   PubMed Web of Science ®Google Scholar
• Pogoncheff CM, Duff RE. Use of zirconia collar to prevent interproximal porcelain fracture: a clinical report. J Prosthet Dent. 2010;104:77–79. doi:10.1016/S0022-3913(10)60095-9
   Web of Science ®Google Scholar
• Homaei E, Farhangdoost K, Tsoi J, Matinlinna J, Pow E. Static and fatigue mechanical behavior of three dental CAD/CAM ceramics. J Mech Behav Biomed Mater. 2016;59:304–313. doi:10.1016/j.jmbbm.2016.01.023
   PubMed Web of Science ®Google Scholar
• Homaei E, Jinc X, Pow E, Matinlinn J, Tsoic J, Farhangdoost K. Numerical fatigue analysis of premolars restored by CAD/CAM ceramic crowns. Dent Mater. 2018;34(7):149–157.
   Web of Science ®Google Scholar
• Zhang L, Wang Z, Chen J, Zhou W, Zhang S. Probabilistic fatigue analysis of all-ceramic crowns based on the finite element method. J Biomech. 2010;43:2321–2326. doi:10.1016/j.jbiomech.2010.04.030
   PubMed Web of Science ®Google Scholar
• Vukicevic AM, Zelic K, Jovicic G, Djuric M, Filipovic N. Influence of dental restorations and mastication loadings on dentine fatigue behaviour: image-based modelling approach. J Dent. 2015;43:556–567. doi:10.1016/j.jdent.2015.02.011
   PubMed Web of Science ®Google Scholar
• Aboushelib MA, Wang H, Kleverlaan CJ, Albert Feilzer AJ. Fatigue behavior of zirconia under different loading conditions. Dent Mater. 2016;32(7):915–920. doi:10.1016/j.dental.2016.03.012
   Web of Science ®Google Scholar
• Abouelleil H, Jeannin C, Amadou Sadat A, Grosgogeat B. Development of a chewing simulator for testing dental materials: a pilot study. Br J Appl Sci Technol. 2015;5(1):1–8. doi:10.9734/BJAST/2015/13003
   Google Scholar
• Rosentritt M, Behr M, van der Zel JM, Feilzer AJ. Approach for evaluating the influence of laboratory simulation. Dent Mater. 2009;25:348–352. doi:10.1016/j.dental.2008.08.009
   PubMed Web of Science ®Google Scholar
• Rosentritt M, Siavikis G, Behr M, Kolbeck C, Handel G. Approach for evaluating the significance of laboratory simulation. J Dent. 2008;361048–361053.
   Web of Science ®Google Scholar
• Rosentritt M, Steiger D, Behr M, Handel G, Kolbeck C. Influence of substructure design and spacer settings on the in vitro performance of molar zirconia crowns. J Dent. 2009;37:978–983. doi:10.1016/j.jdent.2009.08.003
   PubMed Web of Science ®Google Scholar
• Dal Piva AMO, Tribst JPM, Borges ALS, Souza ROAE, Bottino MA. CAD-FEA modeling and analysis of different full crown monolithic restorations. Dent Mater. 2018;34(9):1342–1350. doi:10.1016/j.dental.2018.06.024
   PubMed Web of Science ®Google Scholar