References
- Ranney ML , GriffethV, JhaAK. Critical supply shortages – the need for ventilators and personal protective equipment during the COVID-19 pandemic. N. Engl. J. Med.382(18), e41 (2020).
- Marco C , RajnikM, CuomoAet al. Features, evaluation and treatment coronavirus (COVID-19). In: StatPearls [Internet].FL, USA (2020).
- Iacobucci G . Covid-19: doctors still at “considerable risk” from lack of PPE, BMA warns. BMJ368, m1316 (2020).
- Iacobucci G . Covid-19: lack of PPE in care homes is risking spread of virus, leaders warn. BMJ368, m1280 (2020).
- Alomari M , MohamedFH, BasitAWet al. Personalised dosing: printing a dose of one's own medicine. Int. J. Pharm.494, 568–577 (2015).
- Sanderson K . 3D printing: the future of manufacturing medicine. Pharm. J.294(7865), 590–592 (2015).
- Ishack S , LipnerSR. A review of 3-dimensional skin bioprinting techniques: applications, approaches, and trends. Dermatol. Surg.46(12), 1500–1505 (2020).
- Goyanes A , FinaF, MartoranaA. Development of modified release 3D printed tablets (printlets) with pharmaceutical excipients using additive manufacturing. Int. J. Pharm.527(1-2), 21–30 (2017).
- Azad MA , OlawuniD, KimbellGet al. Polymers for extrusion-based 3D printing of pharmaceuticals: a holistic materials-process perspective. Pharmaceutics12(2), 124 (2020).
- Vaezi M , ZhongG, KalamiHet al. Extrusion-based 3D printing technologies for 3D scaffold engineering. Funct. 3D Tiss. Eng. Scaff.2018, 235–254 (2015).
- He DL , HanFG, WangZet al. A review of 3D printing via fused deposition modeling in pharmaceutics. Acta. Pharm. Sin. B.51(11), 1659–1665 (2016).
- Long J , GholizadehH, LuJet al. Novel biomaterials used in medical 3D printing techniques. Curr. Pharm. Des.9(1), 17 (2018).
- Tappa K , JammalamadakaU. Novel biomaterials used in medical 3D printing techniques. J. Funct. Biomater.9(1), 17 (2018).
- Mubarak S , DhamodharanD, DivakaranNet al. Enhanced mechanical and thermal properties of stereolithography 3Dprinted structures by the effects of incorporated controllably annealed anatase tio2 nanoparticles. Nanomaterials (Basel)10(1), 79 (2020).
- Healy AV , FuenmayorE, DoranPet al. Additive manufacturing of personalized pharmaceutical dosage forms via stereolithography. Pharmaceutics11(12), E645 (2019).
- Kumar H , KimK. Stereolithography 3D bioprinting. Methods Mol. Biol.2140, 93–108 (2020).
- Fina F , GoyanesA, GaisfordSet al. Selective laser sintering (SLS) 3D printing of medicines. Int. J. Pharm.529(1-2), 285–293 (2017).
- Fina F , MadlaCM, GoyanesAet al. Fabricating 3D printed orally disintegrating printlets using selective laser sintering. Int. J. Pharm.541(1-2), 101–107 (2018).
- Lei Z , YangJ, ZhuangZ. Headform and N95 filtering facepiece respirator interaction: contact pressure simulation and validation. J. Occup. Environ. Hyg.9(1), 46–58 (2012).
- Lei Z1 , YangJ, ZhuangZ. A novel algorithm for determining contact area between a respirator and a headform. J. Occup. Environ. Hyg.11(4), 227–237 (2014).
- Han DH , RhiJ, LeeJ. Development of prototypes of half-mask facepieces for Koreans using the 3D digitizing design method: a pilot study. Ann. Occup. Hyg.48(8), 707–714 (2004).
- Krishnamurthy H , SenD. Deriving statistical fit contours and shape of an aerosol mask from 3D head scans. Int. J. Hum. Fac. Model. Simul.2(4), 293–313 (2011).
- Niezgoda G , KimJ, RobergeR, BensonS. Flat fold and cup-shaped N95 filtering facepiece respirator face seal area and pressure determinations: a stereophotogrammetry study. J. Occup. Environ. Hyg.10(8), 419–424 (2013).
- Zhuang Z , BensonS, ViscusiD. Digital 3-D headforms with facial features representative of the current US workforce. Ergonomics53(5), 661–671 (2010).
- Cai M , ShenH, ZhangLXet al. Study of contact characteristics between a respirator and a headform. J. Occup. Environ. Hyg.13(3), D50–D60 (2016).
- Cai M , ShenS, LiH. The effect of facial expressions on respirators contact pressures. Comput. Method Biomech. Biomed. Engin.20(10), 1122–1131 (2017).
- Cai M , LiH, ShenSet al. Customized design and 3D printing of face seal for an N95 filtering facepiece respirator. J. Occup. Environ. Hyg.15(3), 226–234 (2018).
- Roberge RJ , NiezgodaG, BensonS. Analysis of forces generated by n95 filtering facepiece respirator tethering devices: a pilot study. J. Occup. Environ. Hyg.9(8), 517–523 (2012).
- Centers for Disease Control and Prevention . NIOSH-approved n95 particulate filtering facepiece respirators. http://www.cdc.gov/niosh/npptl/topics/respirators/disp_part/n95list1.html
- Swennen GRJ , PottelL, HaersPE. Custom-made 3D-printed face masks in case of pandemic crisis situations with a lack of commercially available FFP2/3 masks. Int. J. Oral Maxillofac. Surg.49(5), 673–677 (2020).
- McAvoy M , BuiAN, HansenCet al. 3D Printed frames to enable reuse and improve the fit of N95 and KN95 respirators. medRxivdoi:10.1101/2020.07.20.20151019 (2020) ( Epub ahead of print).
- Imbrie-Moore AM , ParkMH, ZhuY, PaulsenMJ, WangH, WooYJ. Quadrupling the n95 supply during the COVID-19 crisis with an innovative 3D-printed mask adaptor. Healthcare (Basel)8(3), 225 (2020).
- Wesemann C , PieralliS, FretwurstTet al. 3D printed protective equipment during COVID-19 pandemic. Materials (Basel)13(8), 1997 (2020).
- Sapoval M , GaultierAL, DelGiudice Cet al. 3D-printed face protective shield in interventional radiology: evaluation of an immediate solution in the era of COVID-19 pandemic. Diagn. Interv. Imaging101(6), 413–415 (2020).
- Lemarteleur V , FouquetV, LeGoff Set al. 3D-printed protected face shields for health care workers in COVID-19 pandemic. Am. J. Infect. Control11, 389–391 (2020).
- Sananès N , LodiM, KochAet al. 3D-printed simulator for nasopharyngeal swab collection for COVID-19. Eur. Arch. Otorhinolaryngol.278(7), 2649–2651 (2020).
- Ford J , GoldsteinT, TrahanS, NeuwirthA, TatorisK, DeckerS. A 3D-printed nasopharyngeal swab for COVID-19 diagnostic testing. 3D Print. Med.6(1), 21 (2020).
- Oland G , GarnerO, deSt Maurice A. Prospective clinical validation of 3D printed nasopharyngeal swabs for diagnosis of COVID-19. Diagn. Microbiol. Infect. Dis.99(3), 115257 (2021).
- Arjunan A , ZahidS, BaroutajiA, RobinsonJ. 3D printed auxetic nasopharyngeal swabs for COVID-19 sample collection. J. Mech. Behav. Biomed. Mater.114, 104175 (2020).
- Ayyıldız S , MuratA, VedatDet al. 3d-printed splitter for use of a single ventilator on multiple patients during covid-19. 3D Print. Addit. Manuf.7(4), 181–185 (2020).
- Dhanani J , PangG, PincusJet al. Increasing ventilator surge capacity in COVID 19 pandemic: design, manufacture and in vitro-in vivo testing in anaesthetized healthy pigs of a rapid prototyped mechanical ventilator. BMC Res. Notes13(1), 421 (2020).
- Haigh JN , DargavilleTR, DaltonPD. Additive manufacturing with polypropylene microfibers. Mater. Sci. Eng. C. Mater. Biol. Appl.77, 883–887 (2017).
- Cabrini L , LandoniG. A novel non-invasive ventilation mask to prevent and manage respiratory failure during fiberoptic bronchoscopy, gastroscopy and transesophageal echocardiography. Heart Lung Vessel.7(4), 297–303 (2015).
- Makowski K , OkrasaM. Application of 3D scanning and 3D printing for designing and fabricating customized half-mask facepieces: a pilot study. Work63(1), 125–135 (2019).
- Ñamendys-Silva SA . Respiratory support for patients with COVID-19 infection. Lancet Respir. Med.8(4), e18 (2020).
- Nickson C . Bag-valve-mask (BVM) ventilation (2019). https://litfl.com/bag-valve-mask-bvm-ventilation/
- Maroni A , MelocchiA, PariettiFet al. 3D printed multi-compartment capsular devices for two-pulse oral drug delivery. J. Control. Release268, 10–18 (2017).
- Fina F , MadlaCM, GoyanesAet al. Fabricating 3D printed orally disintegrating printlets using selective laser sintering. Int. J. Pharm.541, 101–107 (2018).
- CBS News . Shortage of possible coronavirus treatment puts others at risk. (2020). http://www.cbsnews.com/news/coronavirus-drugs-remdesivir-hydroxychloroquine-shortage-risk/
- Erman M . States work to limit prescriptions of potential coronavirus drugs. Reuters (2020). http://www.reuters.com/article/us-health-coronavirus-usa-pharmacies/states-work-to-limit-prescriptions-of-potential-coronavirus-drugs-idUSKBN2190XC
- GILEAD Corporation . Emergency access to remdesivir outside of clinical trials. Gilead Sciences (2020). http://www.gilead.com/purpose/advancing-global-health/covid-19/emergency-access-to-remdesivir-outside-of-clinical-trials
- ASHP Foundation . Hydroxychloroquine sulfate tablets. (2020). http://www.ashp.org/Drug-Shortages/Current-Shortages/Drug-Shortage-Detail.aspx?id=646
- Formlabs Inc . The ultimate guide to stereolithography (SLA) 3D printing. Formslab (2020). https://archive-media.formlabs.com/upload/SLA_Guide.pdf
- Banerjee SS , BurbineS, KodihalliNet al. 3D-printable PP/SEBS thermoplastic elastomeric blends: preparation and properties. Polymers (Basel)11(2), 347 (2019).
- Banerjee SS , BhowmickAK. Novel nanostructured polyamide 6/fluoroelastomer thermoplastic elastomeric blends: influence of interaction and morphology on physical properties. Polymer54, 6561–6571 (2013).
- Setz S , StrickerF, DuschekT. Morphology and mechanical properties of blends of isotactic or syndiotactic polypropylene with SEBS block copolymers. J. Appl. Polym. Sci.59, 1117–1128 (1996).
- Setz S , StrickeF, KresslerJ. Morphology and mechanical properties of blends of isotactic or syndiotactic polypropylene with SEBS block copolymers. J. Appl. Polym. Sci.86(2), 359–365 (1996).
- Roberge RJ . Face shields for infection control: a review. J. Occup. Environ. Hyg.13(4), 235–242 (2016).
- Centers for Disease Control and Prevention . Strategies to allocate ventilators from stockpiles to facilities (2019). http://www.cdc.gov/coronavirus/2019-ncov/hcp/ppe-strategy/ventilators.html
- The Physics arXiv . How to build a mechanical ventilator for a few hundred euros. (2020). http://www.discovermagazine.com/technology/how-to-build-a-mechanical-ventilator-for-a-few-hundred-euros
- 3dadept . COVID-19: spain approves first medical 3D printed ventilator. (2020). https://3dadept.com/covid-19-spain-approves-first-medical-3d-printed-ventilator-next-step-is-to-produce-100-ventilators-per-day/
- Custom 3D printed noninvasive ventilation mask . Pediatric sleep apnea (2020). http://www.clinicalconnection.com/clinical-trials-from-other-databases/full-listing-from-other-databases/418052/44158316/custom-3-d-printed-noninvasive-ventilation-mask
- Bersten AD . Best practices for noninvasive ventilation. CMAJ183(3), 293–294 (2011).
- Hill NS . Where should noninvasive ventilation be delivered?Respir. Care54(1), 62–70 (2009).
- BD Corporation . BD flocked swabs. (2020). http://www.bd.com/en-us/offerings/capabilities/specimen-collection/swab-based-specimen-collection/bd-flocked-swabs
- Dawood FS , JaraJH, EstripeautD. What is the added benefit of oropharyngeal swabs compared to nasal swabs alone for respiratory virus detection in hospitalized children aged <10 years?J. Infect. Dis.212(10), 1600–1603 (2015).
- Northwell Heath Group . Northwell 3D prints nasal swabs critical to COVID-19 testing. (2020). http://www.northwell.edu/news/in-the-news/northwell-3d-prints-nasal-swabs-critical-to-covid-19-testing
- Brittney Manchester . Coronavirus (COVID-19) update: daily roundup March 31, 2020. http://www.fda.gov/news-events/press-announcements/coronavirus-covid-19-update-daily-roundup-march-31-2020
- Herper M . Gilead pauses access to experimental COVID-19 drug due to ‘overwhelming demand’. StatNews (2020). http://www.statnews.com/2020/03/22/gilead-suspends-access-to-experimental-covid-19-drug-remdesivir/
- Hsiao WK , LorberB, PaudelA. Can 3D printing of oral drugs help fight the current COVID-19 pandemic (and similar crisis in the future)?Expert Opin. Drug Deliv.17(7), 899–902 (2020).
- Hsiao W-K , LorberL, ReisamerHet al. 3D printing of oral drugs: a new reality or hype? Expert Opin. Drug Deliv. 15(1), 1–4 (2018).
- Haring AP , TongY, HalperJet al. Programming of multicomponent temporal release profiles in 3D printed polypills via core-shell, multilayer, and gradient concentration profiles. Adv. Healthcare Mater.7, 1800213 (2018).
- Goyanes A , AllahhamN, TrenfieldSJet al. Direct powder extrusion 3D printing: fabrication of drug products using a novel single-step process. Int. J. Pharm.567, 118471 (2019).
- Wu S , AhmadZ, LiJ-Set al. Fabrication of flexible composite drug films via foldable linkages using electrohydrodynamic printing. Mater. Sci. Eng. C.108, 110393 (2020).
- Khaled SA , BurleyJC, AlexandeMR. Desktop 3D printing of controlled release pharmaceutical bilayer tablets Author links open overlay panel. Int. J. Pharm.461(1-2), 105–111 (2014).
- Goyanes A , BuanzAB, BasitAW. Fused-filament 3D printing (3DP) for fabrication of tablets. Int. J. Pharm.476(1-2), 88–92 (2014).
- Goyanes A , BuanzAB, HattonGB. 3D printing of modified-release aminosalicylate (4-ASA and 5-ASA) tablets. Eur. J. Pharm. Biopharm.89, 157–162 (2015).
- Wang J , GoyanesA, GaisfordS. Stereolithographic (SLA) 3D printing of oral modified-release dosage forms. Int. J. Pharm.503(1-2), 207–212 (2016).
- Martinez PR , GoyanesA, BasitAW, GaisfordS. Influence of geometry on the drug release profiles of stereolithographic (sla) 3D-printed tablets. AAPS Pharm. Sci. Tech.19(8), 3355–3361 (2018).
- Zhang S , LiM, NaijiaH. Stereolithography 3D printing of lignin-reinforced composites with enhanced mechanical properties. ACS Omega4(23), 20197–20204 (2019).
- Schmid M , WegenerK, AmadoA. Materials perspective of polymers for additive manufacturing with selective laser sintering. J. Mater. Res.29, 1824–1832 (2014).
- Yuan RLS , ZhangW, ZhengH. 3D printing of mixed matrix films based on metal-organic frameworks and thermoplastic polyamide 12 by selective laser sintering for water applications. ACS Appl. Mater. Interfaces11(43), 40564–40574 (2019).
- Lin Q , ZhaoS, GaoD. A conceptual model for the coronavirus disease 2019 (COVID-19) outbreak in Wuhan, China with individual reaction and governmental action. Int. J. Infect. Dis.93, 211–216 (2020).
- Information for clinicians on therapeutic options for patients with COVID-19 (2020). http://www.cdc.gov/coronavirus/2019-ncov/hcp/therapeutic-options.html
- Coronavirus (COVID-19) update (2020). http://www.fda.gov/news-events/press-announcements/coronavirus-covid-19-update-daily-roundup-april-7-2020
- Liu C , ZhouQ, LiYet al. Research and development on therapeutic agents and vaccines for COVID-19 and related human coronavirus diseases. ACS Cent. Sci.6(3), 315–331 (2020).
- Richardson P , GriffinI, TuckerCet al. Baricitinib as potential treatment for 2019-nCoV acute respiratory disease. Lancet395(10223), e30–e31 (2020).
- Zhang X , ZhuZ, NiZet al. Inexpensive, rapid fabrication of polymer-film microfluidic autoregulatory valve for disposable microfluidics. Biomed. Microdevices19(2), 21 (2017).
- Pavani K , MahabaleswaraH, JosephKet al. Tracheal intubation through laryngeal mask airway Ctrach™ with polyvinyl chloride tube: comparison between two orientations of the tracheal tube. Anaesthesiol. Clin. Pharmacol.33(4), 473–479 (2017).
- Yu I , ChenRK. A feasibility study of an extrusion-based fabrication process for personalized drugs. J. Pers. Med.10(1), 16 (2020).
- Rocha CR , ShemelyaCM, WickerRBet al. Novel ABS-based binary and ternary polymer blends for material extrusion 3D printing. J. Mater. Res.29, 1859–1866 (2014).
- Lamichhane S , ParkJBP, SohnDH. Customized novel design of 3d printed pregabalin tablets for intra-gastric floating and controlled release using fused deposition modeling. Pharmaceutics11(11), 564 (2019).