References
- Goiato MC, Panzarini SR, Tomiko C, Luvizuto ER. Temporary flexible immediately removable partial denture: a case report. Dent Today 2008;27:114-6.
- Kaplan P. Flexible removable partial dentures: design and clasp concepts. Dent Today 2008;27:120-3.
- Katsumata Y, Hojo S, Hamano N, Watanabe T, Yamaguchi H, Okada S, . Bonding strength of autopolymerizing resin to nylon denture base polymer. Dent Mater J 2009;28:409–18.
- Hargreaves AS. Nylon as a denture-base material. Dent Pract Dent Rec 1971;22:122–8.
- Stafford GD, Huggett R, MacGregor AR, Graham J. The use of nylon as a denture-base material. J Dent 1986;14:18–22.
- Hiromori K, Fujii K, Inoue K. Viscoelastic properties of denture base resins obtained by underwater test. J Oral Rehabil 2000;27:522–31.
- Pronych GJ, Sutow EJ, Sykora O. Dimensional stability and dehydration of a thermoplastic polycarbonate-based and two PMMA-based denture resins. J Oral Rehabil 2003;30:1157–61.
- Parvizi A, Lindquist T, Schneider R, Williamson D, Boyer D, Dawson DV. Comparison of the dimensional accuracy of injection-molded denture base materials to that of conventional pressure-pack acrylic resin. J Prosthodont 2004;13:83–9.
- Pfeiffer P, Rosenbauer EU. Residual methyl methacrylate monomer, water sorption, and water solubility of hypoallergenic denture base materials. J Prosthet Dent 2004;92:72–8.
- Pfeiffer P, Rolleke C, Sherif L. Flexural strength and moduli of hypoallergenic denture base materials. J Prosthet Dent 2005;93:372–7.
- Yunus N, Rashid AA, Azmi LL, Abu-Hassan MI. Some flexural properties of a nylon denture base polymer. J Oral Rehabil 2005;32:65–71.
- Hamanaka I, Takahashi Y, Shimizu H. Mechanical properties of injection-molded thermoplastic denture base resins. Acta Odontol Scand 2011;69:75–9.
- International Standard. ISO 1567 for Dentistry – Denture base polymers. Genève, Switzerland: International Organization for Standardization; 1999.
- International Standard. ISO 1567 AMENDMENT 1 for Dentistry – Denture base polymers AMENDMENT 1. Genève, Switzerland: International Organization for Standardization; 2003.
- International Standard. ISO 179-1 for Plastics – Determination of Charpy impact properties – Part 1: Non-instrumented impact test. Genève, Switzerland: International Organization for Standardization; 2000.
- Takahashi Y, Kawaguchi M, Chai J. Flexural strength at the proportional limit of a denture base material relined with four different denture reline materials. Int J Prosthodont 1997;10:508–12.
- Takahashi Y, Chai J, Kawaguchi M. Effect of water sorption on the resistance to plastic deformation of a denture base material relined with four different denture reline materials. Int J Prosthodont 1998;11:49–54.
- Chai J, Takahashi Y, Kawaguchi M. The flexural strengths of denture base acrylic resins after relining with a visible-light-activated material. Int J Prosthodont 1998;11:121–4.
- Takahashi Y, Chai J, Kawaguchi M. Equilibrium strengths of denture polymers subjected to long-term water immersion. Int J Prosthodont 1999;12:348–52.
- Takahashi Y, Chai J, Kawaguchi M. Strength of relined denture base polymers subjected to long-term water immersion. Int J Prosthodont 2000;13:205–8.
- Anusavice KJ. Phillips' science of dental materials. 11th ed. St. Louis, MO: Sanders; 2003. p 742.
- Powers JP, Sakaguchi RL. Craig's restorative dental materials. 12th ed. St. Louis, MO: Mosby; 2006. p 524.
- Ruyter IE, Ekstrand K, Björk N. Development of carbon/graphite fiber reinforced poly (methyl methacrylate) suitable for implant-fixed dental bridges. Dent Mater 1986;2:6–9.
- Vallittu PK, Ruyter IE, Ekstrand K. Effect of water storage on the flexural properties of E-glass and silica fiber acrylic resin composite. Int J Prosthodont 1998;11:340–50.
- Takabayashi Y. Characteristics of denture thermoplastic resins for non-metal clasp dentures. Dent Mater J 2010;29:353–61.
- O'Brien WL. Dental materials and their selection. 4th ed. Chicago, IL: Quintessence Publishing Co, Inc; 2008. p 79–83.