Two-body wear of monolithic, veneered and glazed zirconia and their corresponding enamel antagonists

References

• Sturzenegger B, Fehér A, Lüthy H, Schumacher M, Loeffel O, Filser F, Reliability and strength of all-ceramic dental restorations fabricated by direct ceramic machining (DCM). Int J Comput Dent 2001;4:89–106.
   PubMedGoogle Scholar
• Fischer J, Stawarczyk B. Compatibility of machined Ce-TZP/Al2O3 nanocomposite and a veneering ceramic. Dent Mater 2007;23:1500–5.
   PubMed Web of Science ®Google Scholar
• Aboushelib MN, Kleverlaan CJ, Feilzer AJ. Evaluation of high fracture toughness composite ceramic dental applications. J Prosthodont 2008;17:538–44.
   PubMedGoogle Scholar
• Kim HT, Han JS, Yang JH, Lee JB, Kim SH. The effect of low temperature aging on the mechanical property & phase stability of Y-TZP ceramics. J Adv Prosthodont 2009;1:113–17.
   PubMedGoogle Scholar
• Kisi EH, Howard CJ. Crystal structure of zirconia phases and their inter-relation. Key Eng Mater 1998;153:1–36.
   Google Scholar
• Lughi V, Sergo V. Low temperature degradation - aging - of zirconia: a critical review of the relevant aspects in dentistry. Dent Mater. 2010;26:807–20.
   Google Scholar
• Piconi C, Burger W, Richter HG, Cittadini A, Maccauro G, Covacci V, Y-TZP for artificial join replacements. Biomaterials 1998;19:1489–94.
   PubMed Web of Science ®Google Scholar
• Chevalier J, Deville S, Munch E, Jullian R, Lair F. Critical effect of cubic phase on aging in 3 mol% yttria-stabilized zirconia ceramics for hip replacement prothesis. Biomaterials 2004;25:5539–45.
   PubMed Web of Science ®Google Scholar
• Deville S, Gremillard L, Chevalier J, Fantozzi G. A critical comparisan of methods for the determination of the aging sensitivity in biomedical grade yttria-stabilized zirconia. J Biomed Mater Res B Appl Biomater 2005;72:239–45.
   PubMed Web of Science ®Google Scholar
• Ban S, Sato H, Suehiro Y, Nakahishi H, Nawa M. Biaxial flexure strength and low temperature degradation of Ce-TZP/Al2O3 nanocomposite and Y-TZP as dental restoratives. J Biomed Mater Res B Appl Biomater 2008;87:492–98.
   Google Scholar
• Vult von Steyern PV, Carlson P, Nilner K. All-ceramic fixed partial dentures designed according to the DC-Zircon technique. A 2-year clinical study. J Oral Rehabil 2005;32:180–7.
   PubMed Web of Science ®Google Scholar
• Raigrodski AJ, Chiche GJ, Potiket N, Hochstedler JL, Mohamed SE, Billiot S, The efficacy of posterior three-unit zirconium-oxide-based ceramic fixed partial dental prostheses: a prospective clinical pilot study. J Prosthet Dent 2006;96:237–44.
   PubMed Web of Science ®Google Scholar
• Sailer I, Fehér A, Filser F, Gauckler LJ, Lüthy H, Hämmerle CH. Five-year clinical results of zirconia frameworks for posterior fixed partial dentures. Int J Prosthodont 2007;20:383–8.
   PubMed Web of Science ®Google Scholar
• Edelhoff D, Florian B, Florian W, Johnen C. HIP zirconia fixed partial dentures-clinical results after 3 years of clinical service. Quintessence Int 2008;39:459–71.
   PubMed Web of Science ®Google Scholar
• Schmitt J, Holst S, Wichmann M, Reich S, Gollner M, Hamel J. Zirconia posterior fixed partial dentures: a prospective clinical 3-year follow-up. Int J Prosthodont 2009;22:597–603.
   PubMed Web of Science ®Google Scholar
• Heintze SD, Cavalleri A, Forjanic M, Zellweger G, Rousson V. Wear of ceramic and antagonist - a systematic evaluation of influencing factors in vitro. Dent Mater 2008;24:433–49.
   PubMed Web of Science ®Google Scholar
• Albashaireh ZS, Ghazel M, Kern M. Two-body wear of different ceramic materials opposed to zirconia ceramic. wear by two/or three body contact. Available at: http://www.iso-org/iso/store.htm J Prosthet Dent 2010;104:105–13.
   PubMed Web of Science ®Google Scholar
• Preis V, Behr M, Kolbeck C, Hahnel S, Handel G, Rosentritt M. Wear performance of substructure ceramics and veneering porcelains. Dent Mater 2011;27:796–804.
   PubMed Web of Science ®Google Scholar
• ISO/TS 14569-2:2001 Dental materials - Guidance on testing of wear - Part 2: wear by two/or three body contact.
   Google Scholar
• Johansson A, Haraldson T, Omar R, Kiliaridis S, Carlsson GE. An investigation of some factors associated with occlusal tooth wear in a selected high-wear sample. Eur J Oral Sci 1993;101:407–15.
   Google Scholar
• Johansson A, Kiliaridis S, Haraldson T, Omar R, Calsson GE. Covariation of some factors associated with occlusal tooth wear in a selected high-wear sample. Eur J Oral Sci 1993;101:398–406.
   Google Scholar
• Mair LH, Stolarski TA, Vowles RW, Lloyd CH. Wear: mechanisms, manifestations and measurements. A report of a Workshop. J Dent 1996;24:141–8.
   PubMed Web of Science ®Google Scholar
• Kim SK, Kim KN, Chang IT, Heo SJ. A study of the effect of chewing patterns on occlusal wear. J Oral Rehabil 2001;28:1048–55.
   PubMed Web of Science ®Google Scholar
• Etman MK. Confocal examination of subsurface cracking in ceramic materials. J Prosthodont 2009;18:550–9.
   PubMedGoogle Scholar
• Suputtamongkol K, Anusavice KJ, Suchatlampong C, Sithiamnuai P, Tulapornchai C. Clinical performance and wear characteristics of veneered lithia-disilicate-based ceramic crowns. Dent Mater 2008;24:667–73.
   PubMed Web of Science ®Google Scholar
• Valenti M, Valenti A. Retrospective survival analysis of 261 lithium disilicate crowns in a private general practice. Quintessence Int 2009;40:573–9.
   PubMed Web of Science ®Google Scholar
• Wolfart S, Eschbach S, Scherrer S, Kern M. Clinical outcome of three-unit lithium-disilicate glas-ceramic fixed dental prostheses: up to 8 years results. Dent Mater 2009;25:e63–71.
   Google Scholar
• Fasbinder DJ, Dennison JB, Heys D, Neiva G. A clinical evaluation of chairside lithium disilicate CAD/CAM crowns. A two-year report. J Am Dent Assoc 2010;141:10s–4s.
   Web of Science ®Google Scholar
• Heintze SD. How to quality validate wear simulation devices methods. Dent Mater 2006;22:712–34.
   PubMed Web of Science ®Google Scholar
• Rosentritt M, Behr M, Gebhard R, Handel G. Influence of stress simulation parameters on the flexural strength of all-ceramic fixed-partial dentures. Dent Mater 2006;22:176–82.
   PubMed Web of Science ®Google Scholar
• Rosentritt M, Behr M, von der Zel JM, Feilzer AJ. Approach for valuating the influence of laboratory simulation. Dent Mater 2009;25:348–52.
   PubMed Web of Science ®Google Scholar
• Rosentritt M, Siavikis G, Behr M, Kolbeck C, Handel G. Approach for valuating the significance of laboratory simulation. J Dent 2008;36:1048–53.
   PubMed Web of Science ®Google Scholar
• Hahnel S, Behr M, Handel G, Rosentritt M. Two-body wear of artificial acrylic and composite resin teeth in relation to antagonist material. J Prosthet Dent 2009;101:269–78.
   PubMed Web of Science ®Google Scholar
• Stawarczyk B, Özcan M, Hallmann L, Ender A, Mehl A, Hämmerle CHF. Effect of zirconia sintering temperature on optical and mechanical properties of Y-TZP ceramics. Clin Oral Investig 2011; submitted.
   PubMedGoogle Scholar
• Chevalier J, Olagnon C, Fantozzi G. Subcritical crack propagation in 3Y-TZP ceramics: static and cyclic fatique. J Am Ceram Soc 1999;82:3129–38.
   Web of Science ®Google Scholar
• Al-Amleh B, Lyons K, Swain M. Clinical trials in zirconia: a systematic review. J Oral Rehabil 2010;37:641–52.
   PubMed Web of Science ®Google Scholar
• Tsukuma K, Kubota Y, Tsukidate T. Thermal and mechanical properties of Y2O3-stabilized tetragonal zirconia polycrystals. In Clausen N, Ruehle M, Heuer AH, editors. Science and technology of zirconia II. Columbus, OH: The American Ceramic Society; 1984. p 382–90.
   Google Scholar
• Watanabe M, Ilio S, Fukuura I. Aging behavior of Y-TZP. In Claussen N, Ruehle M, Heuer AH, editors. Science and technology of zirconia II. Columbus, OH: The American Ceramic Society; 1984. p 391–8.
   Google Scholar
• Lange FF, Dunlpo GL, Davis BI. Degradation during ageing of transformation toughened ZrO2-Y2O3 materials at 250°C. J Am Ceram Soc 1986;69:237–40.
   Web of Science ®Google Scholar
• Chevalier J. Low-temperature aging of Y-TZP ceramic. J Am Ceram Soc 1999;82:2150–4.
   Web of Science ®Google Scholar