References
- Alt V, Hannig M, Wöstmann B, Balkenhol M. Fracture strength of temporary fixed partial dentures CAD/CAM versus directly fabricated restorations. Dent Mater 2011;27:339–47.
- Nguyen JF, Mogonney V, Ruse ND, Sadoun M. Resin composite blocks via high-pressure high-temperature polymerization. Dent Mater 2012;28:529–34.
- Balkenhol M, Mautner MC, Ferger P, Wöstmann B. Mechanical properties of provisional crown and bridge materials: chemical-curing versus dual curing systems. J Dent 2008;36:15–20.
- Göncü Basaran E, Ayna E, Vallittu PK, Lassila LV. Load-bearing of handmade and computer-aided design-computer-aided manufacturing-fabricated tree-unit fixed dental prostheses of particulate filler composite. Acta Odontol Scand 2011;69:144–50.
- Stawarczyk B, Ender A, Trottmann A, Özcan M, Fischer J, Hämmerle CHF. Load-bearing capacity of CAD/CAM milled polymeric three-unit fixed dental prostheses: effect of aging regimens. Clin Oral Investig 2012;16:1669–77.
- Ersu B, Yuzugullu B, Ruya Yazici A, Canay S. Surface roughness and bond strengths of glass-infiltrated alumina-ceramics prepared using various surface treatments. J Dent 2009;37:848–56.
- Marshall SJ, Bayne SC, Baier R, Tomsia AP, Marshall GW. A review of adhesion science. Dent Mater 2010;26:e11–16.
- Kawara M, Carter JM, Ogle RK, Johnson HH. Bonding of plastic teeth to denture base resins. J Prosthet Dent 1991;66:566–71.
- Vallittu PK, Ruyter IE. The swelling phenomenon of acrylic resin polymer teeth at the interface at the interface with denture base polymers. J Prosthet Dent 1997;78:194–9.
- Pereira SG, Fulgencio R, Nunes TG, Toledano M, Osorio R, Carvalho RM. Effect of curing protocol on the polymerization of dual-cured cements. Dent Mater 2010;26:710–18.
- Stawarczyk B, Basler T, Ender A, Roos M, Özcan M, Hämmerle CHF. Effect of surface conditioning with airborne-particle abrasion on the tensile strength of polymeric CAD/CAM crowns luted with self-adhesive and conventional resin cements. J Prosthet Dent 2012;107:94–101.
- Clancy JM, Hawkins LF, Keller JC, Boyer DB. Bond strength and failure analysis of light-cured denture resins bonded to denture teeth. J Prosthet Dent 1991;65:315–24.
- Cunningham JL. Shear bond strength of resin teeth to heat-cured and light-cured denture base resin. J Oral Rehabil 2000;27:312–16.
- Hayakawa I, Hirano S, Nagao M, Matsumoto T, Masuhara E. Adhesion of a new light polymerized denture base resin to resin teeth and denture base materials. Int J Prosthodont 1991;4:561–8.
- Yanikoglu DN, Duymus DZ, Bayindir DF. Comparative bond strength of autopolymerising denture resin and light cured composite resin to denture teeth. Int Dent J 2002;52:20–4.
- Rached RN, Del Bel Cury AA. Heat-cured acrylic resin repaired microware-cured one: bond strength and surface texture. J Oral Rehabil 2001;28:370–5.
- Geerts GA, Jooste CH. A comparison of the bond strength of microwave- and water bath-cured denture material. J Prosthet Dent 1993;70:406–9.
- Papazoglou E, Vasilas AI. Shear bond strength for composite and autopolymerized acrylic resins bonded to acrylic resin denture teeth. J Prosthet Dent 1999;82:573–8.
- Vallittu PK, Ruyter IE. Swelling of poly(methyl methacrylate) resin at the repair joint. Int J Prosthodont 1997;10:254–8.
- Vallittu PK, Lassila VP, Lappalainen R. Wetting the repair surface with methyl methacrylate affects the transverse strength of repaired heat-polymerized resin. J Prosthet Dent 1992;69:340–3.
- Vallittu PK, Lassila VP, Lappalainen R. The effect of notch shape and self-cured acrylic repair on the fatigue resistance of an acrylic resin denture base. J Oral Rehabil 1996;23:108–13.
- Vallittu PK. Some factors affected the transverse strength of repaired denture acrylic resin. Eur J Prosthodont Rest Dent 1996;4:7–9.
- Buyukyilmaz S, Ruyter IE. Curing temperature affects acrylic denture base tooth bond. Int J Prosthodont 1997;10:49–54.