Overdenture retaining bar stress distribution: A finite-element analysis

References

• de Deco CP, do Santos JF, da Cunha Vde P, Marchini L. General health of elderly institutionalised and community-dwelling Brazilians. Gerodontology 2007;24:136–42.
   PubMedGoogle Scholar
• Bilhan H, Erdogan O, Ergin S, Celik M, Ates G, Geckili O. Complication rates and patient satisfaction with removable dentures. J Adv Prosthodont 2012;4:109–15.
   PubMedGoogle Scholar
• Petersen PE, Yamamoto T. Improving the oral health of older people: the approach of the WHO Global Oral Health Programme. Community Dent Oral Epidemiol 2005;33:81–92.
   PubMed Web of Science ®Google Scholar
• Baracat LF, Teixeira AM, dos Santos MB, da Cunha Vde P, Marchini L. Patients’ expectations before and evaluation after dental implant therapy. Clin Implant Dent Relat Res 2011;13:141–5.
   PubMedGoogle Scholar
• Thomason JM. The use of mandibular implant-retained overdentures improve patient satisfaction and quality of life. J Evid Based Dent Pract 2010;10:61–3.
   PubMedGoogle Scholar
• Feine JS, Carlsson GE, Awad MA, Chehade A, Duncan WJ, Gizani S, et al. The McGill consensus statement on overdentures. Mandibular two-implant overdentures as first choice standard of care for edentulous patients. Montreal, Quebec, May 24–25, 2002. Int J Oral Maxillofac Implants 2002;17:601–2.
   PubMedGoogle Scholar
• Walton JN, Huizinga SC, Peck CC. Implant angulation: a measurement technique, implant overdenture maintenance, and the influence of surgical experience. Int J Prosthodont 2001;14:523–30.
   PubMedGoogle Scholar
• Naert I, Quirynen M, Theuniers G, van Steenberghe D. Prosthetic aspects of osseointegrated fixtures supporting overdentures. A 4-year report. J Prosthet Dent 1991;65:671–80.
   PubMedGoogle Scholar
• Petropoulos VC, Smith W, Kousvelari E. Comparison of retention and release periods for implant overdenture attachments. Int J Oral Maxillofac Implants 1997;12:176–85.
   PubMedGoogle Scholar
• Al-Turki LE, Chai J, Lautenschlager EP, Hutten MC. Changes in prosthetic screw stability because of misfit of implant-supported prostheses. Int J Prosthodont 2002;15:38–42.
   PubMed Web of Science ®Google Scholar
• Abduo J, Bennani V, Waddell N, Lyons K, Swain M. Assessing the fit of implant fixed prostheses: a critical review. Int J Oral Maxillofac Implants 2010;25:506–15.
   PubMed Web of Science ®Google Scholar
• Spazzin AO, Dos Santos MB, Sobrinho LC, Consani RL, Mesquita MF. Effects of horizontal misfit and bar framework material on the stress distribution of an overdenture-retaining bar system: a 3D finite element analysis. J Prosthodont 2011;20:517–22.
   PubMedGoogle Scholar
• Spazzin AO, Costa AR, Correr AB, Consani RL, Correr-Sobrinho L, dos Santos MB. Effect of bar cross-section geometry on stress distribution in overdenture-retaining system simulating horizontal misfit and bone loss. J Biomech 2013;46:2039–44.
   PubMedGoogle Scholar
• Dos Santos MB, Bacchi A, Correr-Sobrinho L, Consani RL. The influence of clip material and cross sections of the bar framework associated with vertical misfit on stress distribution in implant-retained overdentures. Int J Prosthodont 2014;27:26–32.
   PubMedGoogle Scholar
• Kunavisarut C, Lang LA, Stoner BR, Felton DA. Finite element analysis on dental implant-supported prostheses without passive fit. J Prosthodont 2002;11:30–40.
   PubMedGoogle Scholar
• Patterson EA, Johns RB. Theoretical analysis of the fatigue life of fixture screws in osseointegrated dental implants. Int J Oral Maxillofac Implants 1992;7:26–33.
   PubMedGoogle Scholar
• Natali AN, Pavan PG, Ruggero AL. Evaluation of stress induced in peri-implant bone tissue by misfit in multi-implant prosthesis. Dent Mater 2006;22:388–95.
   PubMed Web of Science ®Google Scholar
• Begg T, Geerts GA, Gryzagoridis J. Stress patterns around distal angled implants in the all-on-four concept configuration. Int J Oral Maxillofac Implants 2009;24:663–71.
   PubMed Web of Science ®Google Scholar
• Bevilacqua M, Tealdo T, Pera F, Menini M, Mossolov A, Drago C, et al. Three-dimensional finite element analysis of load transmission using different implant inclinations and cantilever lengths. Int J Prosthodont 2008;21:539–42.
   PubMed Web of Science ®Google Scholar
• Silva-Neto JP, Pimentel MJ, Neves FD, Consani RL, Santos MB. Stress analysis of different configurations of 3 implants to support a fixed prosthesis in an edentulous jaw. Braz Oral Res 2013;28:67–73.
   Google Scholar
• Abreu RT, Spazzin AO, Noritomi PY, Consani RL, Mesquita MF. Influence of material of overdenture-retaining bar with vertical misfit on three-dimensional stress distribution. J Prosthodont 2010;19:425–31.
   PubMedGoogle Scholar
• Bacchi A, Consani RL, Mesquita MF, Dos Santos MB. Effect of framework material and vertical misfit on stress distribution in implant-supported partial prosthesis under load application: 3-D finite element analysis. Acta Odontol Scand 2013;71:1243–9.
   PubMed Web of Science ®Google Scholar
• Bacchi A, Consani RL, Mesquita MF, dos Santos MB. Influence of different mucosal resiliency and denture reline on stress distribution in peri-implant bone tissue during osseointegration. A three-dimensional finite element analysis. Gerodontology 2012;29:e833–7.
   Web of Science ®Google Scholar
• dos Santos MB, Consani RL, Mesquita MF. Influence of different soft liners on stress distribution in peri-implant bone tissue during healing period. A 3D finite element analysis. J Oral Implantol 2013;39:575–81.
   PubMedGoogle Scholar
• Cochran DL. The scientific basis for and clinical experiences with Straumann implants including the ITI Dental Implant System: a consensus report. Clin Oral Implants Res 2000;11(Suppl):133–58.
   Google Scholar
• Trisi P, Marcato C, Todisco M. Bone-to-implant apposition with machined and MTX microtextured implant surfaces in human sinus grafts. Int J Periodontics Restorative Dent 2003;23:427–37.
   PubMedGoogle Scholar
• Sahin S, Cehreli MC. The significance of passive framework fit in implant prosthodontics: current status. Implant Dent 2001;10:85–92.
   PubMedGoogle Scholar
• Zervas PJ, Papazoglou E, Beck FM, Carr AB. Distortion of three-unit implant frameworks during casting, soldering, and simulated porcelain firings. J Prosthodont 1999;8:171–9.
   PubMedGoogle Scholar