References
- Gibson, C., 2000, Risk management—Why? How? Who? Delivered to the Risk Management in Vehicle Transportation for People in Wheelchairs meeting held by the Institute of Physics and Engineering in Medicine at the Botanical Gardens, 16th November 2000, Birmingham.
- International Organization for Standardization, 2005, ISO 7176-19: Wheeled mobility devices for use as seats in motor vehicles.
- Le Claire, M., Visvikis, C., Oakley, C., Savill, T., Edwards, M., 2003, The Safety of Wheelchair Occupants in Road Passenger Vehicles (London: UK: Department for Transport).
- Bertocci, G.E., Szobota, S., Hobson, D.A., Digges, K., 1999, Computer simulation and sled test validation of a powerbase wheelchair and occupant subjected to frontal crash conditions. IEEE Transport Rehabilitation Engineering, 7, 234–244.
- Kang, W., Pilkey, W.D., 1998, Crash simulations of wheelchair-occupant systems in transport. Journal of Rehabilitation Research & Development, 35, 73–84.
- Caldicott, S.J., Shapcott, N., 2008, Validation of a software-based stability assessment system for wheelchairs and their occupants. Journal of Medical Engineering and Technology, 32, 440–447.
- Rogers, P.D., Wilcox, S.J., Chong, A.Z., Gibson, C., 2009, Modelling the Crashworthiness of Specialist Wheelchair Devices (Pontypridd: School of Engineering, University of Glamorgan).
- International Organization for Standardization, 2001, ISO 10542-1: Technical systems and aids for disabled or handicapped persons—wheelchair tie-down and occupant-restraint systems.
- Huang, M., 2000, Vehicle Crash Mechanics (Boca Raton, FL, USA: CRC Press).
- International-Organization-for-Standardization, 2005, ISO 17373: Road vehicles—sled test procedure for evaluating occupant head and neck interactions with seat/head restraint designs in low-speed rear-end impact.
- Hell, W.L.K., Walz F., Muser M., Kramer, M., Hartwig, E., 1999, Consequences for seat design due to rear end accident analysis, sled tests and possible test criteria for reducing cervical spine injuries after rear end collision. In Biomechanics of Impact(Barcelona, Spain: Bron Cedex; IRCOBI, pp. 243–260.
- Prasad, P., Kim, A., Weerappuli, D.P.V., Roberts, V., Schneider, D., 1997, Relationships between passenger-car seat back strength and occupant injury severity in rear-end collisions: field and laboratory studies. SAE Transactions, 106, 3935–3967.
- Warner, C.Y., Stother, C.E., James, M.B., Decker, R.L., 2003, Occupant protection in rear-end collisions: II. The role of seat back deformation in injury reduction. SAE International, 106, 370–381.
- International Organization for Standardization, 2002, ISO 16840-4: Seating devices for use in motor vehicles.
- Shaw, G., Lapidot, A., Scavnicky, M., Schneider, L.W., Roy, P., 1994, Interlaboratory study of proposed compliance test protocol for wheelchair tiedown and occupant restraint systems. In Proceedings of the 38th Stapp Car Crash Conference, Fort Lauderdale, FL, USA, Oct 31 – Nov 4, 1994. (Warrendale, PA, USA: SAE).
- Solanki, K.O.D.L., Burton, C.L., Fang, H., Horstemeyer, M.F., 2004, Crashworthiness simulations comparing PAM-CRASH and LS-DYNA. Society of Automotive Engineers, 2004. NUMB 1870, pp. 11–20.
- Mao, M., Chirwa, E.C., Chen, T., Latchford, J., 2004, Static and dynamic roof crush simulation using LS-DYNA3D. International Journal of Crashworthiness, 9, 495–504.
- Song, D., Mack, P., Tarriere, C., Brun-Cassan, F., Le Coz, J.Y., Lavaste, F., 2003, Finite element simulation of the occupant/belt interaction: chest and pelvis deformation, belt sliding and submarining. SAE International, 92, 817–835.
- Bertocci, G.E., Szobota, S., Ha, D.R., Van Roosmalen, L., 2000, Development of frontal impact crashworthy wheelchair seating design criteria using computer simulation. Journal of Rehabilitation and Development, 37, 565–572.
- Bertocci, G., Ha, D., Van Roosmalen, L., Karg, P., Deemer, E., 2001, Evaluation of wheelchair drop seat crashworthiness. Medical Engineering and Physics, 23, 249–257.
- Bertocci, G., Souza, A.L., Szobota, S., 2003, The effects of wheelchair-seating stiffness and energy absorption on occupant frontal impact kinematics and submarining risk using computer simulation. Journal of Rehabilitation Research and Development, 40, 125–130.
- Rouhana, S.W., 2003, Assessment of lap-shoulder belt restraint performance in laboratory testing. Progress in Technology, 92, 135–145.