Effect of thermal cycling and disinfection on microhardness of acrylic resin denture base

References

• Sartori, E.A., Schmidt, C.B., Mota, E.G., Hirakata, L.M., and Shinkai, R.S., 2008, Cumulative effect of disinfection procedures on microhardness and tridimensional stability of a poly (methyl methacrylate) denture base resin. Journal of Biomedical Materials Research Part B: Applied Biomaterials, 86, 360–367
   PubMedGoogle Scholar
• Ma, T., Johnson, G.H., and Gordon, G.E., 1997, Effects of chemical disinfectants on the surface characteristics and color of denture resins. Journal of Prosthetic Dentistry, 77, 197–204
   PubMed Web of Science ®Google Scholar
• Machado, A.L., Breeding, L.C., Vergani, C.E., and da Cruz Perez, L.E., 2009, Hardness and surface roughness of reline and denture base acrylic resins after repeated disinfection procedures. Journal of Prosthetic Dentistry, 102, 115–122
   PubMed Web of Science ®Google Scholar
• Marra, J., de Souza, R.F., Barbosa, D.B., Pero, A.C., and Compagnoni, M.A., 2009, Evaluation of the bond strength of denture base resins to acrylic resin teeth: Effect of thermocycling. Journal of Prosthodontics, 18, 438–443
   PubMedGoogle Scholar
• Goiato, M.C., Rahal, J.S., Gennari-Filho, H., Fajardo, R.S., and Gonçalves, W.A., 2000, [Dimensional changes and porosities evaluation and acrylic resins between conventional polymerization methods and by microwave]. Revista da Escola de Odontologia de Porto Alegre, 42, 37–40. Portuguese
   Google Scholar
• Paranhos, H.F., Silva-Lovato, C.H., Souza, R.F., Cruz, P.C., Freitas, K.M., and Peracini, A., 2007, Effects of mechanical and chemical methods on denture biofilm accumulation. Journal of Oral Rehabilitation, 34, 606–612
   PubMed Web of Science ®Google Scholar
• Thomas, C.J., and Webb, B.C., 1995, Microwaving of acrylic resin dentures. European Journal of Prosthodontics and Restorative Dentistry, 3, 179–182
   PubMedGoogle Scholar
• Consani, R.L., Vieira, E.B., Mesquita, M.F., Mendes W.B., Arioli-Filho J.N., 2008, Effect of microwave disinfection on physical and mechanical properties of acrylic resins. Brazilian Dental Journal, 19, 348–353
   PubMedGoogle Scholar
• Asad, T., Watkinson, A.C., and Huggett, R., 1993, The effect of various disinfectant solutions on the surface hardness of acrylic resin denture base material. International Journal of Prosthodontics, 6, 9–12
   PubMedGoogle Scholar
• Silva, M.M., Vergani, C.E., Giampaolo, E.T., Neppelenbroek, K.H., Spolidorio, D.M., and Machado, A.L., 2006, Effectiveness of microwave irradiation on the disinfection of complete dentures. Journal of Prosthodontics, 19, 288–93
   Google Scholar
• Neppelenbroek, H.K., Pavarina, A.C., Spolidorio, D.M.P., Sgavioli Massucato, E.M., Spolidorio, L.C., and Vergani, C.E., 2008, Effectiveness of microwave disinfection of complete dentures on the treatment of Candida-related denture stomatitis. Journal of Oral Rehabilitation, 35, 836–846
   PubMed Web of Science ®Google Scholar
• Sanitá, P.V., Vergani, C.E., Giampaolo, E.T., Pavarina, A.C., and Machado, A.L., 2009, Growth of Candida species on complete dentures: Effect of microwave disinfection. Mycoses, 52, 154–160
   PubMed Web of Science ®Google Scholar
• Neppelenbroek, K.H., Pavarina, A.C., Vergani, C.E., and Giampaolo, E.T., 2005, Hardness of heat-polymerized acrylic resins after disinfection and long-term water immersion. Journal of Prosthetic Dentistry, 93, 171–176
   PubMed Web of Science ®Google Scholar
• Goiato, M.C., Zuccolotti, B.C., Moreno, A., dos Santos, D.M., Pesqueira, A.A., and Dekon, S.F., 2011, Colour change of soft denture liners after storage in coffee and coke. Gerodontology, 28, 140–145
   PubMed Web of Science ®Google Scholar
• Goiato, M.C., Santos, D.M., Moreno, A., Iyda, M.G., Rezende, M.C., and Haddad, M.F., 2012, Effect of disinfection and storage on the flexural strength of ocular prosthesis acrylic resins. Gerodontology, 29, e838–844
   Web of Science ®Google Scholar
• Haddad, M.F., Goiato, M.C., Santos, D.M., Moreno, A., Filipe D'almeida, N., and Alves Pesqueira, A., 2011, Color stability of maxillofacial silicone with nanoparticle pigment and opacifier submitted to disinfection and artificial aging. Journal of Biomedical Optics, 16, 095004
   Web of Science ®Google Scholar
• Dogan, A., Bek, B., Cevik, N.N., and Usanmaz, A., 1995, Effect of preparation conditions of acrylic denture base materials on the level of residual monomer, mechanical properties and water absorption. Journal of Dentistry, 23, 313–318
   PubMed Web of Science ®Google Scholar
• Cucci, A.L., Vergani, C.E., Giampaolo, E.T., and Afonso, M.C., 1998, Water sorption, solubility, and bond strength of two autopolymerizing acrylic resins and one heatpolymerizing acrylic resin. Journal of Prosthetic Dentistry, 80, 434–438
   PubMed Web of Science ®Google Scholar
• Qudah, S., Hugget, R., and Harrison, A., 1991, The effect of thermocycling on the hardness of soft lining materials. Quintessence International, 22, 575–580
   PubMedGoogle Scholar
• Pinto Lde, R., Acosta, E.J., Távora, F.F., da Silva, P.M., and Porto, V.C., Effect of repeated cycles of chemical disinfection on the roughness and hardness of hard reline acrylic resins. Gerodontology, 27, 147–153
   PubMed Web of Science ®Google Scholar
• Nikawa, H., Hamada, T., Yamashiro, H., and Kumagai, H., 1999, A review of in vitro and in vivo methods to evaluate the efficacy of denture cleansers. International Journal of Prosthodontics, 12, 153–159
   PubMed Web of Science ®Google Scholar
• Hamouda, I.M., and Ahmed, S.A., 2010, Effect of microwave disinfection on mechanical properties of denture base acrylic resin. Journal of the Mechanical Behavior of Biomedical Materials, 3, 480–487
   PubMed Web of Science ®Google Scholar
• Lai, C.P., Tsai, M.H., Chen, M., Chang, H.S., and Tay, H.H., 2004, Morphology and properties of denture acrylic resins cured by microwave energy and conventional water bath. Dentistry Maters, 20, 133–141
   Google Scholar
• Izumida, F.E., Ribeiro, R.C., Giampaolo, E.T., Machado, A.L., Pavarina, A.C., and Vergani, C.E., 2011, Effect of microwave disinfection on the surface roughness of three denture base resins after tooth brushing. Gerodontology, 28, 277–282
   PubMed Web of Science ®Google Scholar
• Kedjarune, U., Charoenworaluk, N., and Koontongkaew, S., 1999, Release of methyl methacrylate from heat-cured and autopolymerized resins: Cytotoxicity testing related to residual monomer. Australian Dental Journal, 44, 25–30
   PubMed Web of Science ®Google Scholar
• Lee, S.Y., Lai, Y.L., and Hsu, T.S., 2002, Influence of polymerization conditions on monomer elution and microhardness of autopolymerized polymethyl methacrylate resin. European Journal of Oral Science, 110, 179–183
   PubMed Web of Science ®Google Scholar
• Braun, K.O., Mello, J.A., Rached, R.N., Del Bel Cury, A.A., 2003, Surface texture and some properties of acrylic resins submitted to chemical polishing. Journal of Oral Rehabilitation, 30, 91–98
   PubMed Web of Science ®Google Scholar
• ANSI/ADA Specification n. 12 Denture Base Resins, 2002, Revised American National Standards/American Dental Association Specification n. 12 for Denture Base Resins (R2007) (New York: American National Standards Institute). Available online at: http://www.ada.org/830.aspx. Accessed
   Google Scholar