Redispersible drug nanoparticles prepared without dispersant by electro-spray drying

References

• Keck CM, Müller RH. (2006). Drug nanocrystals of poorly soluble drugs produced by high pressure homogenisation. Eur J Pharm Biopharm, 62:3–16.
   PubMed Web of Science ®Google Scholar
• Kim KH, Lee JC, Lee J. (2008). Amphiphilic comb-like polymers based on poly(oxyethylene)s as drug-delivery carriers. Macromol Biosci, 8:339–346.
   PubMed Web of Science ®Google Scholar
• Lee J. (2003). Drug nano- and microparticles processed into solid dosage forms: Physical properties. J Pharm Sci, 92:2057–2068.
   PubMed Web of Science ®Google Scholar
• Lee J, Lee SJ, Choi JY, Yoo JY, Ahn CH. (2005). Amphiphilic amino acid copolymers as stabilizers for the preparation of nanocrystal dispersion. Eur J Pharm Sci, 24:441–449.
   PubMed Web of Science ®Google Scholar
• Park C, Kim K, Lee J, Lee J. (2008). In situ nanofabrication via electrohydrodynamic jetting of countercharged nozzles. Polymer Bulletin, 61:521–528.
   Web of Science ®Google Scholar
• Van Eerdenbrugh B, Van den Mooter G, Augustijns P. (2008). Top-down production of drug nanocrystals: Nanosuspension stabilization, miniaturization and transformation into solid products. Int J Pharm, 364:64–75.
   PubMed Web of Science ®Google Scholar
• Kesisoglou F, Panmai S, Wu Y. (2007). Nanosizing–oral formulation development and biopharmaceutical evaluation. Adv Drug Deliv Rev, 59:631–644.
   PubMed Web of Science ®Google Scholar
• Kim S, Lee J. (2011). Folate-targeted drug-delivery systems prepared by nano-comminution. Drug Dev Ind Pharm, 37:131–138.
   PubMed Web of Science ®Google Scholar
• Lee J, Cheng Y. (2006). Critical freezing rate in freeze drying nanocrystal dispersions. J Control Release, 111:185–192.
   PubMed Web of Science ®Google Scholar
• Lee MK, Kim MY, Kim S, Lee J. (2009). Cryoprotectants for freeze drying of drug nano-suspensions: Effect of freezing rate. J Pharm Sci, 98:4808–4817.
   PubMed Web of Science ®Google Scholar
• Kim S, Lee J. (2010). Effective polymeric dispersants for vacuum, convection and freeze drying of drug nanosuspensions. Int J Pharm, 397:218–224.
   PubMed Web of Science ®Google Scholar
• Chaubal MV, Popescu C. (2008). Conversion of nanosuspensions into dry powders by spray drying: a case study. Pharm Res, 25:2302–2308.
   PubMed Web of Science ®Google Scholar
• Vehring R. (2008). Pharmaceutical particle engineering via spray drying. Pharm Res, 25:999–1022.
   PubMed Web of Science ®Google Scholar
• Vergote GJ, Vervaet C, Van Driessche I, Hoste S, De Smedt S, Demeester J et al. (2001). An oral controlled release matrix pellet formulation containing nanocrystalline ketoprofen. Int J Pharm, 219:81–87.
   PubMed Web of Science ®Google Scholar
• Freitas C, Müllerä RH. (1998). Spray-drying of solid lipid nanoparticles (SLN TM). Eur J Pharm Biopharm, 46:145–151.
   PubMed Web of Science ®Google Scholar
• Yin SX, Franchini M, Chen J, Hsieh A, Jen S, Lee T et al. (2005). Bioavailability enhancement of a COX-2 inhibitor, BMS-347070, from a nanocrystalline dispersion prepared by spray-drying. J Pharm Sci, 94:1598–1607.
   PubMed Web of Science ®Google Scholar
• Arya N, Chakraborty S, Dube N, Katti DS. (2009). Electrospraying: A facile technique for synthesis of chitosan-based micro/nanospheres for drug delivery applications. J Biomed Mater Res Part B Appl Biomater, 88:17–31.
   PubMed Web of Science ®Google Scholar
• Park C, Lee J. (2010). One-Step immobilization of protein-encapsulated core/shell particles onto nanofibers. Macromol Mater Eng, 295:544–550.
   Web of Science ®Google Scholar
• Wu Y, MacKay JA, McDaniel JR, Chilkoti A, Clark RL. (2009). Fabrication of elastin-like polypeptide nanoparticles for drug delivery by electrospraying. Biomacromolecules, 10:19–24.
   PubMed Web of Science ®Google Scholar
• Ganan-Calvo A, Davila J, Barrero A. (1997). Current and droplet size in the electrospraying of liquids. Scaling laws. J Aerosol Sci, 28:249–275.
   Web of Science ®Google Scholar
• Park CH, Lee J. (2010). Alternating encapsulation of water-soluble components in a one-dimensional structure. Macromol Mater Eng, 295:22–25.
   Web of Science ®Google Scholar
• Gupta P, Elkins C, Long TE, Wilkes GL. (2005). Electrospinning of linear homopolymers of poly(methyl methacrylate): Exploring relationships between fiber formation, viscosity, molecular weight and concentration in a good solvent. Polymer 46, 4799–4810.
   Web of Science ®Google Scholar
• Larsen G, Spretz R, Velarde-Ortiz R. (2004). Use of coaxial gas jackets to stabilize Taylor cones of volatile solutions and to induce particle-to-fiber transitions. Adv Mater, 16:166–169.
   Web of Science ®Google Scholar
• Li D, Xia YN. (2004). Direct fabrication of composite and ceramic hollow nanofibers by electrospinning. Nano Letters, 4:933–938.
   Web of Science ®Google Scholar
• Liu J, Kumar S. (2005). Microscopic polymer cups by electrospinning. Polymer, 46:3211–3214.
   Web of Science ®Google Scholar
• Merisko-Liversidge E, Liversidge GG, Cooper ER. (2003). Nanosizing: A formulation approach for poorly-water-soluble compounds. Eur J Pharm Sci, 18:113–120.
   PubMed Web of Science ®Google Scholar
• Park CH, Youn HR, Lee J, Lee KU, Park JY, Koh EH et al. (2009). Improved efficacy of appetite suppression by lipoic acid particles prepared by nanocomminution. Drug Dev Ind Pharm, 35:1305–1311.
   PubMed Web of Science ®Google Scholar
• Lee J, Yee A. (2001). Inorganic particle toughening II: Toughening mechanisms of glass bead filled epoxies. Polymer, 42:589–597.
   Web of Science ®Google Scholar
• Morrison I, Ross S. (2002). Colloidal dispersions: Suspensions, emulsions, and foams. New York, USA: Wiley-Interscience.
   Google Scholar
• Bergese P, Colombo I, Gervasoni D, Depero L. (2004). Melting of nanostructured drugs embedded into a polymeric matrix. J Phys Chem B, 108:15488–15493.
   Web of Science ®Google Scholar
• Hecq J, Deleers M, Fanara D, Vranckx H, Amighi K. (2005). Preparation and characterization of nanocrystals for solubility and dissolution rate enhancement of nifedipine. Int J Pharm, 299:167–177.
   PubMed Web of Science ®Google Scholar
• Kocbek P, Baumgartner S, Kristl J. (2006). Preparation and evaluation of nanosuspensions for enhancing the dissolution of poorly soluble drugs. Int J Pharm, 312:179–186.
   PubMed Web of Science ®Google Scholar
• Teeranachaideekul V, Junyaprasert VB, Souto EB, Müller RH. (2008). Development of ascorbyl palmitate nanocrystals applying the nanosuspension technology. Int J Pharm, 354:227–234.
   PubMed Web of Science ®Google Scholar
• Yoo JY, Kim M, Lee J. (2007). Electrospraying of micro/nano particles for protein drug delivery. Polymer (Korea), 30:215–220.
   Google Scholar
• Rayleigh L. (1882). On the equilibrium of liquid conducting masses charged with electricity. Philos Mag, 14:184–186.
   Google Scholar
• Alessandro G, Keqi T. (1994). Charge and fission of droplets in electrostatic sprays. Phys Fluids, 6:404–414.
   Web of Science ®Google Scholar
• Schweizer JW, Hanson DN. (1971). Stability limit of charged drops. J Coll Inter Sci, 35:417–423.
   Web of Science ®Google Scholar
• Taflin DC, Ward TL, Davis EJ. (1989). Electrified droplet fission and the Rayleigh limit. Langmuir, 5:376–384.
   Web of Science ®Google Scholar
• Park C, Lee J. (2009). Electrosprayed polymer particles: Effect of the solvent properties. J Appl Polymer Sci, 114:430–437.
   Web of Science ®Google Scholar
• Chiba R, Ito M, Nishio Y. (2010). Addition effects of imidazolium salts on mesophase structure and optical properties of concentrated hydroxypropyl cellulose aqueous solutions. Polymer J, 42:232–241.
   Web of Science ®Google Scholar