References
- Kottala N, Abebe A, Sprockel O, et al. Evaluation of the performance characteristics of bilayer tablets: part I. Impact of material properties and process parameters on the strength of bilayer tablets. AAPS PharmSciTech 2012;13:1236--42
- Kottala N, Abebe A, Sprockel O, et al. Evaluation of the performance characteristics of bilayer tablets: part II. Impact of environmental conditions on the strength of bilayer tablets. AAPS PharmSciTech 2012;13:1190--6
- Podczeck F. Theoretical and experimental investigations into the delamination tendencies of bilayer tablets. Int J Pharm 2011;408:102–12
- Wu C-Y, Seville JPK. A comparative study of compaction properties of binary and bilayer tablets. Powder Technol 2009;189:285–94
- Kottala N, Abebe A, Sprockel O, et al. Influence of compaction properties and interfacial topography on the performance of bilayer tablets. Int J Pharm 2012;436:171–8
- Podczeck F, Al-Muti E. The tensile strength of bilayered tablets made from different grades of microcrystalline cellulose. Eur J Pharm Sci Off J Eur Fed Pharm Sci 2010;41:483–8
- Podczeck F, Drake KR, Newton JM, Haririan I. The strength of bilayered tablets. Eur J Pharm Sci Off J Eur Fed Pharm Sci 2006;29:361–6
- Karehill PG, Glazer M, Nyström C. Studies on direct compression of tablets. XXIII. The importance of surface roughness for the compactability of some directly compressible materials with different bonding and volume reduction properties. Int J Pharm 1990;64:35–43
- Pandey P, Turton R. Movement of different-shaped particles in a pan-coating device using novel video-imaging techniques. AAPS PharmSciTech 2005;6:E237–44
- Okutgen E, Jordan M, Hogan JE, Aulton ME. Effects of tablet core dimensional instability on the generation of internal stresses within film coats part II: temperature and relative humidity variation within a tablet bed during aqueous film coating in an accela-cota. Drug Dev Ind Pharm 1991;17:1191–9
- Wobker MS, Mehrotra A, Carter B. Use of commercial data loggers to develop process understanding in pharmaceutical unit operations. J Pharm Innov 2010;5:169–80
- Pandey P, Bindra DS. Real-time monitoring of thermodynamic microenvironment in a pan coater. J Pharm Sci 2013;10:336–40
- Pandey P, Ji J, Subramanian G, et al. Understanding the thermodynamic micro-environment inside a pan coater using a data logging device. Drug Dev Ind Pharm 2013. [Epub ahead of print]. doi: 10.3109/03639045.2013.772192
- Pandey P, Turton R, Joshi N, et al. Scale-up of a pan-coating process. AAPS PharmSciTech 2006;7:E1--8
- Elandt-Johnson RC, Johnson NL. Survival models and data analysis. New York: Wiley; 1980
- Kruskal WH. Historical notes on the Wilcoxon unpaired two-sample test. J Am Stat Assoc 1957;52:356–60
- Akseli I, Abebe A, Sprockel O, Cuitino A. Mechanistic characterization of bilayer tablet formulations. Powder Technol 2013;236:30–6
- Panos PC, Zavaliangos A. Understanding the interfacial strength of bilayer pharmaceutical tablets. Adv Powder Metal Particulate Mater 2007;1:25–35
- Moeltgen CV, Puchert T, Menezes JC, et al. A novel in-line NIR spectroscopy application for the monitoring of tablet film coating in an industrial scale process. Talanta 2012;92:26–37
- Pourkavoos N, Peck GE. The effect of swelling characteristics of superdisintegrants on the aqueous coating solution penetration into the tablet matrix during film coating process. Pharm Res 1993;10:1363–71
- Hadfield P, Bayhan N, Porter S, Drefko W. An investigation into the effects of increasing the superdisintegrant conent in a tablet formulation on the ease of film coating using surface-roughness analysis to evaluate surface effects. AAPS Annual Meeting 2008; Poster R6233