References
- Acharya, G., Park, K. (2006). Mechanisms of controlled drug release from drug-eluting stents. Adv Drug Deliv Rev. 58:387–401.
- Ahn, S.-B., Jeong, H.M. (1998). Phase behavior and hydrogen bonding in poly(ethylene-co-vinyl alcoho)/poly(N-vinyl-2-pyrrolidone) blends. Kor Polym J. 6:389–95.
- Alexis, F., Rath, S.K., Venkatraman, S.S. (2005). Controlled release from bioerodible polymers: effect of drug type and polymer composition. J Contr Rel. 102:333–44.
- Alexis, F., Venkatraman, S.S., Rath, S.K., Boey, F. (2004). In vitro study of release mechanisms of paclitaxel and rapamycin from drug-incorporated biodegradable stent matrices. J Contr Rel. 98:67–74.
- Anderson, J.M. (2001). Biodegradation of polymers. Encyclopedia of Materials: Science and Technology, London: Pergamon, 560–3.
- Chen, M.C., Liang, H.F., Chui, Y.L., Chang, Y., Wei, H.J., Sung, H.W. (2005). A novel drug-eluting stent spray-coated with multi-layers of collagen and sirolimus. J Contr Rel. 108:178–89.
- Chen, X., Davies, M.C., Roberts, C.J., Tendler, S.J.B., Williams, P.M., Davies, J., Dawkes, A.C., Edwards, J.C. (1998). Interpretation of tapping mode atomic force microscopy data using amplitude-phase-distance measurements. Ultramicroscopy 75:171–81.
- Chen, X., Roberts, C.J., Zhang, J., Davies, M.C., Tendler, S.J.B. (2002). Phase contrast and attraction-repulsion transition in tapping mode atomic force microscopy. Surface Sci. 519:L593–8.
- Chung, T.W., Huang, Y.Y., Liu, Y.Z. (2001). Effects of the rate of solvent evaporation on the characteristics of drug loaded PLLA and PDLLA microspheres. Int J Pharm. 212:161–9.
- Ehtezazi, T., Washington, E. (2000). Controlled release of macromolecules from PLA microspheres: using porous structure topology. J Contr Rel. 68:361–72.
- Geulcher, S.A., Hollinger, J.O. (2005). An introduction to biomaterials. Taylor & Francis, CRC Press; Boca Raton, FL, USA.
- Hanke, H., Strohschneider, T., Oberhoff, M., Betz, E., Karsch, K.R. (1990). Time course of smooth muscle cell proliferation in the intima and media of arteries following experimental angioplasty. Circ Res. 67:651–9.
- Kamberi, M., Nayak, S., Myo-Min, K., Carter, T.P., Hancock, L., Feder, D. (2009). A novel accelerated in vitro release method for biodegradable coating of drug eluting stents: insight to the drug release mechanisms. Eur J Pharm Sci. 37:217–22.
- Kavanagh, C.A., Rochev, Y.A., Gallagher, W.M., Dawson, K.A., Keenan, A.K. (2004). Local drug delivery in restenosis injury: thermoresponsive co-polymers as potential drug delivery systems. Pharmacol Ther. 102:1–15.
- Kenawy, E.R., Layman, J.M., Watkins, J.R., Bowlin, G.L., Matthews, J.A., Simpson, D.G., Wnek, G.E. (2003). Electrospinning of poly(ethylene-co-vinyl alcohol) fibers. Biomaterials. 24:907–13.
- Kumar, N., Ravikumar, M.N.V., Domb, A.J. (2001). Biodegradable block copolymers. Adv Drug Deliv Rev. 53:23–44.
- Langer, R. (1990). New methods of drug delivery. Science. 249:1527–1533.
- Lau, K.W., Mak, K.H., Hung, J.S., Sigwart, U. (2004). Clinical impact of stent construction and design in percutaneous coronary intervention. Am Heart J. 147:764–73.
- Mahoney, C.M., Fahey, A.J. (2008). Three-dimensional compositional analysis of drug eluting stent coatings using cluster secondary ion mass spectrometry. Anal Chem. 80:624–32.
- Marcel, A., Beijk, M., Piek. J.J. (2007). XIENCE V everolimus-eluting coronary stent system: a novel second generation drug-eluting stent. Exp Rev Med Devices. 4:11–21.
- Mudra, H., Di Mario, C., de Jaegere, P., Figulla, H.R., Macaya, C., Zahn, R., Wennerblom, B., Rutsch, W., Voudris, V., Regar, E., Henneke, K.H., Schachinger, V., Zeiher, A. (2001). Randomized comparison of coronary stent implantation under ultrasound or angiographic guidance to reduce stent restenosis. Circulation. 104:1343–9.
- Panescu, D. (2004). Drug eluting stents. Eng Med Biol Mag. 23:21–3.
- Peng, T., Gibula, P., Yao, K., Goosen, M.F.A. (1996). Role of polymers in improving the results of stenting in coronary arteries. Biomaterials. 17:685–94.
- Ranade, S.V., Miller, K.M., Richard, R.E., Chan, A.K., Allen, M.J., Helmus, M.N. (2004). Physical characterization of controlled release of paclitaxel from the TAXUSTM express2TM drug-eluting stent. J Biomed Mater Res A. 71A:625–34.
- Ranade, S.V., Richard, R.E., Helmus, M.N. (2005). Styrenic block copolymers for biomaterial and drug delivery applications. Acta Biomat. 1:137–44.
- Toutouzas, K., Colombo, A., Stefanadis, C. (2004). Clinical impact of stent construction and design in percutaneous coronary intervention. Eur Heart J. 25:1679–87.
- Van der Hoeven, B.L., Pires, N.M.M. (2004). Drug-eluting stents: results, promises and problems. Int J Cardiol. 99:9–17.
- Vogt, F., Stein, A., Rettemeier, G., Krott, N., Hoffmann, R., Dahl, J.V., Bosserhoff, A.K., Michaeli, W., Hanrath, P., Weber, C., Blindt, R. (2004). Long-term assessment of a novel biodegradable paclitaxel-eluting coronary polylactide stent. Eur Heart J. 25:1330–40.
- Waksman, R. (2002). Drug eluting stents from bench to bed. Cardiovasc Radiat Med. 3:226–41.
- Wang, X., Venkatraman, S.S., Boey, F.Y.C., Loo, J.S.C., Tan, L.P. (2006). Controlled release of sirolimus from a multilayered PLGA stent matrix. Biomaterials. 27:5588–95.
- Westedt, U., Wittmar, M., Hellwig, M., Hanefeld, P., Greiner, A., Schaper, A.K., Kissel, T. (2006). Paclitaxel releasing films consisting of poly(vinyl alcohol)-graft-poly(lactide-co-glycolide) and their potential as biodegradable stent coatings. J Contr Rel.111:235–46.
- Wu, M. (2008). The micro and nanoscale characterization of drug eluting stents. Thesis, University of Nottingham.
- Wu, M., Lothar, K., Fuh-Wei, T., Davies, M.C., Roberts, C.J. (2009). Nanoscale mechanical measurement determination of the glass transition temperature of poly(lactic acid)/everolimus coated stents in air and dissolution media. Eur J Pharm Sci. 36:493–501.
- Yokoyama, M. (1992). Block copolymers as drug carriers. Crit Rev Ther Drug Carrier Syst. 9:213–48.