147
Views
6
CrossRef citations to date
0
Altmetric
Research Article

Effects of process parameters on solid self-microemulsifying particles in a laboratory scale fluid bed

&
Pages 511-520 | Received 10 Nov 2010, Accepted 17 Dec 2010, Published online: 02 Feb 2011

References

  • Bansal T, Mustafa G, Khan ZI, Ahmad FJ, Khar RK, Talegaonkar S. Solid self-nanoemulsifying delivery systems as a platform technology for formulation of poorly soluble drugs. Crit Rev Ther Drug Carrier Syst 2008;25:63–116.
  • Attama AA, Nzekwe IT, Nnamani PO, Adikwu MU, Onugu CO. The use of solid self-emulsifying systems in the delivery of diclofenac. Int J Pharm 2003;262:23–28.
  • Nazzal S, Nutan M, Palamakula A, Shah R, Zaghloul AA, Khan MA. Optimization of a self-nanoemulsified tablet dosage form of Ubiquinone using response surface methodology: effect of formulation ingredients. Int J Pharm 2002;240:103–114.
  • Abdalla A, Mäder K. Preparation and characterization of a self-emulsifying pellet formulation. Eur J Pharm Biopharm 2007;66:220–226.
  • Franceschinis E, Voinovich D, Grassi M, Perissutti B, Filipovic-Grcic J, Martinac A et al. Self-emulsifying pellets prepared by wet granulation in high-shear mixer: influence of formulation variables and preliminary study on the in vitro absorption. Int J Pharm 2005;291:87–97.
  • Yi T, Wan J, Xu H, Yang X. A new solid self-microemulsifying formulation prepared by spray-drying to improve the oral bioavailability of poorly water soluble drugs. Eur J Pharm Biopharm 2008;70:439–444.
  • Mehta AM. Scale-up considerations in the fluidized-bed process for controlled-release products. Pharm Tech 1988;12:46–52.
  • Gorodnichev VI, El-Banna HM, Andreev BV. The construction and uses of factorial designs in the preparation of solid dosage forms. Part 2: Granulation in a fluidized bed. Pharmazie 1981;36:270–273.
  • Wan LSC, Lim KS. Action of binders in the fluid bed granulation of lactose. S T P Pharma 1991;1:248–255.
  • Lipps DM, Sakr AM. Characterization of wet granulation process parameters using response surface methodology. 1. Top-spray fluidized bed. J Pharm Sci 1994;83:937–947.
  • Merkku P, Lindqvist AS, Leiviska K, Yliruusi J. Influence of granulation and compression process variables on flow rate of granules and on tablet properties, with special reference to weight variation. Int J Pharm 1994;102:117–125.
  • Miyamoto Y, Ogawa S, Miyajima M, Sato H, Takayama K, Nagai T. An evaluation of process variables in wet granulation. Drug Dev Ind Pharm 1995;21:2213–2225.
  • Vojnovic D, Moneghini M, Rubessa F. Experimental design for a granulation process with ‘a priori’ criteria. Drug Dev Ind Pharm 1995;21:823–831.
  • Juslin L, Yliruusi J. The effect of raw material and atomizing air pressure on the properties of granules prepared in a fluid bed granulator. S T P Pharma 1996;6:328–334.
  • Watano S, Morikawa T, Miyanami K. Mathematical model in the kinetics of agitation fluid bed granulation. Effects of humidity content, damping speed and operation time on granule growth rate. Chem Pharm Bull 1996;44:409–415.
  • Watano S, Fukushima T, Miyanami K. Heat transfer and granule growth rate in fluid bed granulation. Chem Pharm Bull 1996;44:572–576.
  • Watano S, Takashima H, Sato Y, Yasutomo T, Miyanami K. Measurement of humidity content by IR sensor in fluid bed granulation. Effects of operating variables on the relationship between granule humidity content and absorbance of IR spectra. Chem Pharm Bull 1996;44:1267–1269.
  • Meshali M, El-Banna HM, El-Sabbagh H. Use of a fractional factorial design to evaluate granulations prepared in a fluidized bed. Pharmazie 1983;38:323–325.
  • Acartürk F. Preparation of a prolonged-release tablet formulation of diclofenac sodium. Part 1: Using chitosan. Pharmazie 1989;44:547–549.
  • Gordon MS. Process considerations in reducing tablet friability and their effect on in vitro dissolution. Drug Dev Ind Pharm 1994;20:11–29.
  • Liu CH, Chen SC, Lee YC, Sokoloski TD, Sheu MT. Directly compressible acetaminophen compositions prepared by fluidized-bed granulation. Drug Dev Ind Pharm 1994;20:1911–1922.
  • Dussert A, Chulia D, Jeannin C, Ozil P. Parametric study of fluid-bed granulation of a low density micronized powder. Drug Dev Ind Pharm 1995;21:1439–1452.
  • Doornbos DA. Optimisation in pharmaceutical sciences. Pharm Weekblad Sci 1981;3:539–577.
  • Rambali B, Baert L, Thoné D, Massart DL. Using experimental design to optimize the process parameters in fluidized bed granulation. Drug Dev Ind Pharm 2001;27:47–55.
  • Schaefer T, Worts O. Control of fluid bed granulation. II. Effects of binder solution and atomization on granule size and size distribution. Arch Pharm Chem Sci 1978;6:14–25.
  • Wan LSC, Heng PWS, Ling BL. Fluid bed granulation with PVP K90 and PVP K120. Drug Dev Ind Pharm 1995;21:857–862.
  • Davies L, Richardson JF. Gas interchange between bubbles and the continuous phase in a fluid bed. Trans Inst Chem Eng 1963;44:293–305.
  • Gupte AR. Das granulieren in der wirbelschicht. Pharm Ind 1973;35:17–20.
  • Rouiller M, Gurny R, Doelker E. Possibilites de production avec un appareil a lit fluidise de laboratoire. Acta Pharm Technol 1975;21:129–138.
  • Sherrington PJ, Oliver R. Granulation. Heyden: London, 1981, pp. 7–60.
  • Fonner DE, Anderson NR, Banker GS. Granulation and tablet characteristics. In: Lieberman HA., Lachman L (Ed.). Pharmaceutical Dosage Forms: Tablets 2. Marcel Dekker: New York, 1981, pp. 185–239.
  • Davies WL, Gloor WT Jr. Batch production of pharmaceutical granulations in a fluidized bed. I. Effects of process variables on physical properties of final granulation. J Pharm Sci 1971;60:1869–1874.
  • Schaefer T, Worts O. Control of fluid bed granulation. V. Factors effecting granule growth. Arch Pharm Chemi Sci 1978;6:69–82.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.