Well-plate freeze-drying: a high throughput platform for screening of physical properties of freeze-dried formulations

References

• Mullard A. 2011 FDA drug approvals. Nat Rev Drug Discov 2012;11:91–94
   PubMed Web of Science ®Google Scholar
• Frokjaer S, Otzen DE. Protein drug stability: a formulation challenge. Nat Rev Drug Discov 2005;4:298–306
   PubMed Web of Science ®Google Scholar
• Nakagawa K, Hottot A, Vessot S, Andrieu J. Influence of controlled nucleation by ultrasounds on ice morphology of frozen formulations for pharmaceutical proteins freeze-drying. Chem Eng Process 2006;45:783–791
   Web of Science ®Google Scholar
• Patel S, Bhugra C, Pikal M. Reduced pressure ice fog technique for controlled ice nucleation during freeze-drying. AAPS PharmSciTech 2009;10:1406–1411
   PubMed Web of Science ®Google Scholar
• Pikal MJ. Freeze drying. Encyclopedia of Pharmaceutical Technology, 3rd ed. p. 1807–1833
   Google Scholar
• Tang X, Nail S, Pikal M. Evaluation of manometric temperature measurement, a process analytical technology tool for freeze-drying: part I, product temperature measurement. AAPS PharmSciTech 2006;7:E95–E103
   PubMedGoogle Scholar
• De Beer TRM, Allesø M, Goethals F, et al. Implementation of a process analytical technology system in a freeze-drying process using Raman spectroscopy for in-line process monitoring. Anal Chem 2007;79:7992–8003
   PubMed Web of Science ®Google Scholar
• Meister E, Gieseler H. Freeze-dry microscopy of protein/sugar mixtures: drying behavior, interpretation of collapse temperatures and a comparison to corresponding glass transition data. J Pharm Sci 2009;98:3072–3087
   PubMed Web of Science ®Google Scholar
• Zhai S, Taylor R, Sanches R, Slater NKH. Measurement of lyophilisation primary drying rates by freeze-drying microscopy. Chem Eng Sci 2003;58:2313–2323
   Web of Science ®Google Scholar
• Kasraian K, Spitznagel TM, Juneau JA, Yim K. Characterization of the sucrose/glycine/water system by differential scanning calorimetry and freeze-drying microscopy. Pharm Dev Technol 1998;3:233–239
   PubMedGoogle Scholar
• Gieseler H, Kessler WJ, Finson M, et al. Evaluation of tunable diode laser absorption spectroscopy for in-process water vapor mass flux measurements during freeze drying. J Pharm Sci 2007;96:1776–1793
   PubMed Web of Science ®Google Scholar
• Kuu WY, O’Bryan KR, Hardwick LM, Paul TW. Product mass transfer resistance directly determined during freeze-drying cycle runs using tunable diode laser absorption spectroscopy (TDLAS) and pore diffusion model. Pharm Dev Technol 2011;16:343–357
   PubMed Web of Science ®Google Scholar
• Tang X, Nail SL, Pikal MJ. Freeze-drying process design by manometric temperature measurement: design of a smart freeze-dryer. Pharm Res 2005;22:685–700
   PubMed Web of Science ®Google Scholar
• Gieseler H, Kramer T, Pikal MJ. Use of manometric temperature measurement (MTM) and SMART™ freeze dryer technology for development of an optimized freeze-drying cycle. J Pharm Sci 2007;96:3402–3418
   PubMed Web of Science ®Google Scholar
• Jorgensen L, Hostrup S, Moeller EH, Grohganz H. Recent trends in stabilising peptides and proteins in pharmaceutical formulation – considerations in the choice of excipients. Expert Opin Drug Deliv 2009;6:1219–1230
   PubMed Web of Science ®Google Scholar
• Parkins DA, Lashmar UT. The formulation of biopharmaceutical products. Pharm Sci Technol Today 2000;3:129–137
   PubMedGoogle Scholar
• Wang W. Lyophilization and development of solid protein pharmaceuticals. Int J Pharm 2000;203:1–60
   PubMed Web of Science ®Google Scholar
• Pikal MJ, Dellerman KM, Roy ML, Riggin RM. The effects of formulation variables on the stability of freeze-dried human growth hormone. Pharm Res 1991;8:427–436
   PubMed Web of Science ®Google Scholar
• Raijada D, Cornett C, Rantanen J. A high throughput platform for understanding the influence of excipients on physical and chemical stability. Int J Pharm 2013;453:285–292
   PubMed Web of Science ®Google Scholar
• Yu LX. Pharmaceutical quality by design: product and process development, understanding, and control. Pharm Res 2008;25:781–791
   PubMed Web of Science ®Google Scholar
• European Medicines Agency: ICH Topic Q 5 C: Quality of Biotechnological Products; 1996:1--9
   Google Scholar
• Capelle M, Gurny R, Arvinte T. A high throughput protein formulation platform: case study of salmon calcitonin. Pharm Res 2009;26:118–128
   PubMed Web of Science ®Google Scholar
• Capelle M, Gurny R, Arvinte T. High throughput screening of protein formulation stability: practical considerations. Eur J Pharm Biopharm 2007;65:131–148
   PubMed Web of Science ®Google Scholar
• Hertzberg RP, Pope AJ. High-throughput screening: new technology for the 21st century. Curr Opin Chem Biol 2000;4:445–451
   PubMed Web of Science ®Google Scholar
• Maecker HT, Rinfret A, D’Souza P, et al. Standardization of cytokine flow cytometry assays. BMC Immunol 2005;6:13
   PubMed Web of Science ®Google Scholar
• Lindsay JP, Clark DS, Dordick JS. Combinatorial formulation of biocatalyst preparations for increased activity in organic solvents: salt activation of penicillin amidase. Biotechnol Bioeng 2004;85:553–560
   PubMed Web of Science ®Google Scholar
• Wennberg T, Kreander K, Lähdevuori M, et al. Primary screening of natural products using micro fractionation combined with a bioassay. J Liq Chromatogr R T 2004;27:2573–2592
   Web of Science ®Google Scholar
• Grant Y, Matejtschuk P, Dalby PA. Rapid optimization of protein freeze-drying formulations using ultra scale-down and factorial design of experiment in microplates. Biotechnol Bioeng 2009;104:957–964
   Google Scholar
• Chieng N, Trnka H, Boetker J, et al. Detecting phase separation of freeze-dried binary amorphous systems using pair-wise distribution function and multivariate data analysis. Int J Pharm 2013;454:167–173
   Google Scholar
• Trnka H, Wu JX, De Weert MV, et al. Fuzzy logic-based expert system for evaluating cake quality of freeze-dried formulations. J Pharm Sci 2013;102:4364–4374
   Google Scholar
• Rantanen J, Antikainen O, Mannermaa J-P, Yliruusi J. Use of the near-infrared reflectance method for measurement of moisture content during granulation. Pharm Dev Technol 2000;5:209–217
   PubMed Web of Science ®Google Scholar
• Luukkonen P, Rantanen J, Mäkelä K, et al. Characterization of wet massing behavior of silicified microcrystalline cellulose and α-lactose monohydrate using near-infrared spectroscopy. Pharm Dev Technol 2001;6:1–9
   PubMed Web of Science ®Google Scholar
• Gonzalez R, Woods R. Digital image processing. Upper Saddle River (NJ): Prentice Hall; 2008
   Google Scholar
• Pratt V. Direct least-squares fitting of algebraic surfaces. SIGGRAPH Comput Graph 1987;21:145–152
   Google Scholar
• De Beer TRM, Wiggenhorn M, Hawe A, et al. Optimization of a pharmaceutical freeze-dried product and its process using an experimental design approach and innovative process analyzers. Talanta 2011;83:1623–1633
   PubMed Web of Science ®Google Scholar
• Cannon AJ, Trappler EH. The influence of lyophilization on the polymorphic behavior of mannitol. PDA J Pharm Sci Technol 2000;54:13–22
   PubMedGoogle Scholar
• Kim AI, Akers MJ, Nail SL. The physical state of mannitol after freeze-drying: effects of mannitol concentration, freezing rate, and a noncrystallizing cosolute. J Pharm Sci 1998;87:931–935
   PubMed Web of Science ®Google Scholar
• Liao X, Krishnamurthy R, Suryanarayanan R. Influence of the active pharmaceutical ingredient concentration on the physical state of mannitol – implications in freeze-drying. Pharm Res 2005;22:1978–1985
   PubMed Web of Science ®Google Scholar
• Liao X, Krishnamurthy R, Suryanarayanan R. Influence of processing conditions on the physical state of mannitol – implications in freeze-drying. Pharm Res 2007;24:370–376
   PubMed Web of Science ®Google Scholar
• Lindholm Larsen HM, Trnka H, Grohganz H. Formation of mannitol hemihydrate in freeze-dried protein formulations – a design of experiment approach. Int J Pharm 2014;460:45–52
   Google Scholar
• Aaltonen J, Rantanen J, Siiriä S, et al. Polymorph screening using near-infrared spectroscopy. Anal Chem 2003;75:5267–5273
   Web of Science ®Google Scholar
• Grohganz H, Fonteyne M, Skibsted E, et al. Classification of lyophilised mixtures using multivariate analysis of NIR spectra. Eur J Pharm Biopharm 2010;74:406–412
   Google Scholar
• Tang X, Pikal M. Design of freeze-drying processes for pharmaceuticals: practical advice. Pharm Res 2004;21:191–200
   PubMed Web of Science ®Google Scholar
• Breen ED, Curley JG, Overcashier DE, et al. Effect of moisture on the stability of a lyophilized humanized monoclonal antibody formulation. Pharm Res 2001;18:1345–1353
   PubMed Web of Science ®Google Scholar
• Towns JK. Moisture content in proteins: its effects and measurement. J Chromatogr A 1995;705:115–127
   PubMed Web of Science ®Google Scholar
• Kamat MS, Lodder RA, DeLuca PP. Near-infrared spectroscopic determination of residual moisture in lyophilized sucrose through intact glass vials. Pharm Res 1989;6:961–965
   PubMed Web of Science ®Google Scholar
• Zografi G. States of water associated with solids. Drug Dev Ind Pharm 1988;14:1905–1926
   Web of Science ®Google Scholar
• Grohganz H, Gildemyn D, Skibsted E, et al. Towards a robust water content determination of freeze-dried samples by near-infrared spectroscopy. Anal Chim Acta 2010;676:34–40
   PubMed Web of Science ®Google Scholar
• Mantanus J, Ziémons E, Lebrun P, et al. Moisture content determination of pharmaceutical pellets by near infrared spectroscopy: method development and validation. Anal Chim Acta 2009;642:186–192
   PubMed Web of Science ®Google Scholar
• te Booy MWM, de Ruiter R, de Meere AJ. Evaluation of the physical stability of freeze-dried sucrose-containing formulations by differential scanning calorimetry. Pharm Res 1992;9:109–114
   PubMed Web of Science ®Google Scholar
• von Graberg S. Freeze drying from small containers: heat and mass transfer and implications on process design [Ph.D. thesis]. Germany: University of Erlangen-Nürnberg; 2011
   Google Scholar
• Maddux NR, Joshi SB, Volkin DB, et al. Multidimensional methods for the formulation of biopharmaceuticals and vaccines. J Pharm Sci 2011;100:4171–4197
   PubMedGoogle Scholar