Polyethylene wear with an entirely HA-coated total hip replacement 79 hips followed for 5 years

References

• Bankston A B, Faris P M, Keating E M, Ritter M A. Polyethylene wear in total hip arthroplasty in patient-matched groups. A comparison of stainless steel, cobalt chrome and titanium-bearing surfaces. J Arthroplasty 1993; 8(3)315–22
   PubMedGoogle Scholar
• Bankston A B, Cates H, Ritter M A, Keating E M, Faris P M. Polyethylene wear in total hip arthroplasty. Clin Orthop 1995a; 317: 7–13
   Google Scholar
• Bankston A B, Keating E M, Ranawat C, Faris P M, Ritter M A. Comparison of polyethylene wear in machined versus molded polyethylene. Clin Orthop 1995b; 317: 37–43
   Google Scholar
• Bartel D L, Bicknell V L, Wright T M. The effect of conformity, thickness and material on stresses in ultra-high molecular weight components for total joint replacement. J Bone Joint Surg (Am) 1986; 68(7)1041–51
   PubMed Web of Science ®Google Scholar
• Bauer T W, Geesink R G, Zimmerman R, McMahon J T. Hy-droxyapatite-coated femoral stems. Histological analysis of components retrieved at autopsy. J Bone Joint Surg (Am) 1991; 73(10)1439–52
   PubMed Web of Science ®Google Scholar
• Berry D J, Barnes C L, Scott R D, Cabanela M E, Poss R. Catastrophic failure of the polyethylene liner of unce-mented acetabular components. J Bone Joint Surg (Br) 1994; 76(4)575–8
   PubMedGoogle Scholar
• Bloebaum R D, DuPont J A. Osteolysis from a press-fit hy-droxyapatite-coated implant. A case study. J Arthroplasty 1993; 8(2)195–202
   PubMedGoogle Scholar
• Bloebaum R D, Beeks D, Dorr L D, Savory C G, DuPont J A, Hofmann A A. Complications with hydroxyapatite particulate separation in total hip arthroplasty. Clin Orthop 1994; 298: 19–26
   PubMed Web of Science ®Google Scholar
• Bono J V, Sanford L, Toussaint J T. Severe polyethylene wear in total hip arthroplasty. Observations from retrieved AMLPLUS hip implants with an ACS polyethylene liner. J Arthroplasty 1994; 9(2)119–25
   PubMedGoogle Scholar
• Callaghan J J, Pedersen D R, Olejniczak J P, Goetz D D, Johnston R C. Radiographic measurement of wear in 5 cohorts of patients observed for 5 to 22 years. Clin Orthop 1995; 317: 14–8
   Google Scholar
• Cates H E, Faris P M, Keating E M, Ritter M A. Polyethylene wear in cemented metal-backed acetabular cups. J Bone Joint Surg (Br) 1993; 75(2)249–53
   PubMedGoogle Scholar
• Chamley J. Low friction arthroplasty of the hip. Springer-Verlag, Berlin, Heidelberg, New York 1979
   Google Scholar
• Chamley J, Cupic Z. The nine- and ten-year results of the low-friction arthroplasty of the hip. Clin Orthop 1973; 95: 9–25
   Google Scholar
• Chamley J, Halley D K. Rate of wear in total hip replacement. Clin Orthop 1975; 112: 170–9
   Google Scholar
• Cupic Z. Long-term follow-up of Charnley arthroplasty of the hip. Clin Orthop 1979; 141: 28–43
   Google Scholar
• D'Antonio J A, Capello W N, Jaffe W L. Hydroxyl-apatite-coated hip implants. Multicenter three-year clinical and roentgenographic results. Clin Orthop 1992; 285: 102–15
   Google Scholar
• Fisher J, Chan K L, Hailey J L, Shaw D, Stone M. Preliminary study of the effect of aging following irradiation on the wear of ultra-high molecular-weight polyethylene. J Arthroplasty 1995; 10(5)689–92
   PubMed Web of Science ®Google Scholar
• Geesink R G, Hoefnagels N H. Six-year results of hydroxya-patite-coated total hip replacement. J Bone Joint Surg (Br) 1995; 77(4)534–47
   PubMedGoogle Scholar
• Geesink R G, de Groot K, Klein C P. Chemical implant fixation using hydroxyl-apatite coatings. The development of a human total hip prosthesis for chemical fixation to bone using hydroxyl-apatite coatings on titanium substrates. Clin Orthop 1987; 225: 147–70
   PubMed Web of Science ®Google Scholar
• Griffith M J, Seidenstein M K, Williams D, Charnley J. Socket wear in Chamley low-friction arthroplasty of the hip. Clin Orthop 1978; 137: 37–47
   Google Scholar
• Hardinge K. The direct lateral approach to the hip. J Bone Joint Surg (Br) 1982; 64(1)17–9
   PubMed Web of Science ®Google Scholar
• Hardy D C, Frayssinet P, Bonel G, Authom T, Le Naelou S A, Delince P E. Two-year outcome of hydroxyapatite-coated prostheses. Two femoral prostheses retrieved at autopsy. Acta Orthop Scand 1994; 65(3)253–7
   PubMed Web of Science ®Google Scholar
• Hernandez J R, Keating E M, Faris P M, Meding J B, Ritter M A. Polyethylene wear in uncemented acetabular components. J Bone Joint Surg (Br) 1994; 76(2)263–6
   PubMedGoogle Scholar
• Huk O L, Bansal M, Betts F, Rimnac C M, Lieberman J R, Huo M H, Salvati E A. Polyethylene and metal debris generated by non-articulating surfaces of modular acetabular components. J Bone Joint Surg (Br) 1994; 76(4)568–74
   PubMedGoogle Scholar
• Izquierdo-Avino R J, Siney P D, Wroblewski B M. Polyethylene wear in the Chamley offset bore acetabular cup. A radiological analysis. J Bone Joint Surg (Br) 1996; 78(1)82–4
   PubMedGoogle Scholar
• Kim Y H, Kim V E. Uncemented porous-coated anatomic total hip replacement. Results at six years in a consecutive series. J Bone Joint Surg (Br) 1993; 75(1)6–13
   PubMed Web of Science ®Google Scholar
• Lintner F, Bohm G, Huber M, Scholz R. Histology of tissue adjacent to an HAC-coated femoral prosthesis. A case report. J Bone Joint Surg (Br) 1994; 76(5)824–30
   PubMedGoogle Scholar
• Livermoie J, Ilstrup D, Morrey B. Effect of femoral head size on wear of the polyethylene acetabular component. J Bone Joint Surg (Am) 1990; 72(4)518–28
   PubMedGoogle Scholar
• Morscher E W. Hydroxyapatite coating of prostheses. J Bone Joint Surg (Br) 1991; 73(5)705–6
   PubMedGoogle Scholar
• Nashed R S, Becker D A, Gustilo R B. Are cementless acetabular components the cause of excess wear and osteolysis in total hip arthroplasty?. Clin Orthop 1995; 317: 19–28
   Google Scholar
• Owen T D, Moran C G, Smith S R, Pinder I M. Results of uncemented porous-coated anatomic total hip replacement. J Bone Joint Surg (Br) 1994; 76(2)258–62
   PubMedGoogle Scholar
• Rimnac C M, Klein R W, Betts F, Wright T M. Post-irradiation aging of ultra-high molecular weight polyethylene. J Bone Joint Surg (Am) 1994; 76(7)1052–6
   PubMedGoogle Scholar
• Rossi P, Sibelli P, Fumero S, Crua E. Short-term results of hydroxyapatite-coated primary total hip arthroplasty. Clin Orthop 1995; 310: 98–102
   Google Scholar
• Sutula L C, Collier J P, Saum K A, Currier B H, Currier J H, Sanford W M, Mayor M B, Wooding R E, Sperling D K, Williams I R, Kasprzak D J, Surprenant V A. Impact of gamma sterilization on clinical performance of polyethylene in the hip. Clin Orthop 1995; 319: 28–40
   PubMed Web of Science ®Google Scholar
• Tonino A J, Romanini L, Rossi P, Borroni M, Greco F, Gar-cia-Araujo C, Garcia-Dihinx L, Murcia-Mazon A, Hein W, Anderson J. Hydroxyapatite-coated hip prostheses. Early results from an international study. Clin Orthop 1995; 312: 211–25
   Google Scholar
• Wang B C, Lee T M, Chang E, Yang C Y. The shear strength and the failure mode of plasma-sprayed hydroxyapatite coating to bone: the effect of coating thickness. J Biomed MatRes 1993; 27: 1315–27
   PubMed Web of Science ®Google Scholar
• Woolson S T, Murphy M G. Wear of the polyethylene of Harris-Galante acetabular components inserted without cement. J Bone Joint Surg (Am) 1995; 77(9)1311–4
   PubMed Web of Science ®Google Scholar
• Wroblewski B M. Direction and rate of socket wear in Charnley low-friction arthroplasty. J Bone Joint Surg (Br) 1985; 67(5)757–61
   PubMedGoogle Scholar
• Önsten I, Carlsson A S, Sanzen L, Besjakov J. Migration and wear of a hydroxyapatite-coated hip prosthesis. A controlled roentgen stereophotogrammetric study. J Bone Joint Surg (Br) 1996; 78(1)85–91
   PubMedGoogle Scholar