Fracture of porcelain-veneered gold-alloy and zirconia molar crowns using a modified test set-up

References

• Rekow ED, Silva NRFA, Coelho PG, Zhang Y, Guess P, Thompson VP. Performance of dental ceramics: challenges for improvement. J Dent Res. 2011;90:937–952
   PubMed Web of Science ®Google Scholar
• Heintze SD, Rousson V. Survival of zirconia- and metal-supported fixed dental prostheses: a systematic review. Int J Prosthodont. 2010;23:493–502
   PubMed Web of Science ®Google Scholar
• Takeichi T, Katsoulis J, Blatz MB. Clinical outcome of single porcelain-fused-to-zirconium dioxide crowns: a systematic review. J Prosthodont Dent. 2013;110:455–461
   Google Scholar
• Kelly JR, Tesk JA, Sorensen JA. Failure of all-ceramic fixed partial dentures in vitro and in vivo: analysis and modeling. J Dent Res. 1995;74:1253–1258
   PubMed Web of Science ®Google Scholar
• Ashkanani HM, Raigrodski AJ, Flinn BD, Heindl H, Mancl LA. Flexural and shear strengths of ZrO2 and a high-noble alloy bonded to their corresponding porcelains. J Prosthet Dent. 2008;100:274–284
   Google Scholar
• Guess PC, Kulis A, Witkowski S, Wolkewitz M, Zhang Y, Strub JR. Shear bond strengths between different zirconia cores and veneering ceramics and their susceptibility to thermocycling. Dent Mater. 2008;24:1556–1567
   PubMed Web of Science ®Google Scholar
• Al-Dohan HM, Yaman P, Dennison JB, Razzoog ME, Lang BR. Shear strength of core-veneer interface in bi-layered ceramics. J Prosthet Dent. 2004;91:349–355
   PubMed Web of Science ®Google Scholar
• Ishibe M, Raigrodski AJ, Flinn BD, Chung KH, Spiekerman C, Winter RR. Shear bond strengths of pressed and layered veneering ceramics to high-noble alloy and zirconia cores. J Prosthet Dent. 2011;106:29–37
   PubMed Web of Science ®Google Scholar
• Kelly JR, Benetti P, Rungruanganunt P, Della Bona A. The slippery slope – critical perspectives on in vitro research methodologies. Dent Mater. 2012;28:41–51
   PubMed Web of Science ®Google Scholar
• Braga RR, Meira JB, Boaro LC, Xavier TA. Adhesion to tooth structure: a critical review of “macro” test methods. Dent Mater. 2010;26:38–49
   PubMed Web of Science ®Google Scholar
• Sailer I, Gottner J, Känel S, Hämmerle CHF. Randomized controlled clinical trial of zirconia-ceramic and metal-ceramic posterior fixed dental prostheses. Int J Prosthodont. 2009;22:553–560
   PubMed Web of Science ®Google Scholar
• Rinke A, Schäfer S, Roediger M. Complication rate of molar crowns: a practice-based clinical evaluation. Int J Comput Dent. 2011;14:203–218
   Google Scholar
• Pelaez J, Cogolludo PG, Serrano B, Lozano JFL, Suarez MJ. A four-year prospective clinical evaluation of zirconia and metal-ceramic posterior fixed dental prostheses. Int J Prosthodont. 2012;25:451–458
   PubMed Web of Science ®Google Scholar
• Rosentritt M, Behr M, Gebhard R, Handel G. Influence of stress simulation parameters on the fracture strength of all-ceramic fixed-partial dentures. Dent Mater. 2006;22:176–182
   PubMed Web of Science ®Google Scholar
• Mahmood DJ, Linderoth EH, Vult von Steyern P. The influence of support properties and complexity on fracture strength and fracture mode of all-ceramic fixed dental prostheses. Acta Odontol Scand. 2011;69:229–237
   PubMed Web of Science ®Google Scholar
• Kelly JR. Clinically relevant approach to failure testing of all-ceramic restorations. J Prosthet Dent. 1999;81:652–661
   PubMed Web of Science ®Google Scholar
• Coelho PG, Silva NR, Bonfante EA, Guess PC, Rekow ED, Thompson VP. Fatigue testing of two porcelain-zirconia all-ceramic crown systems. Dent Mater. 2009;25:1122–1127
   PubMed Web of Science ®Google Scholar
• Rosentritt M, Steiger D, Behr M, Handel G, Kolbeck C. Influence of substructure design and spacer settings on the in vitro performance of molar zirconia crowns. J Dent. 2009;37:978–983
   PubMed Web of Science ®Google Scholar
• Larsson C, El Madhoun S, Wennerberg A, Vult von Steyern P. Fracture strength of yttria-stabilized tetragonal zirconia polycrystals crowns with different design: an in vitro study. Clin Oral Implants Res. 2012;23:820–826
   PubMed Web of Science ®Google Scholar
• Swain MV. Unstable cracking (chipping) of veneering porcelain on all-ceramic dental crowns and fixed partial dentures. Acta Biomater. 2009;5:1668–1677
   PubMed Web of Science ®Google Scholar
• Kohorst P, Dittmer MP, Borchers L, Stiesch-Scholz M. Influence of cyclic fatigue in water on the load-bearing capacity of dental bridges made of zirconia. Acta Biomater. 2008;4:1440–1447
   PubMed Web of Science ®Google Scholar
• Yoshinari M, Dérand T. Fracture strength of all-ceramic crowns. Int J Prosthodont. 1994;7:329–338
   PubMedGoogle Scholar
• Quinn JB, Sundar V, Parry EE, Quinn GD. Comparison of edge-chipping resistance of PFM and veneered zirconia specimens. Dent Mater. 2010;26:13–20
   Google Scholar
• Suleiman SH, Vult von Steyern P. Fracture strength of porcelain fused to metal crowns made of cast, milled or laser sintered cobalt-chromium. Acta Odontol Scand. 2013;71:1280–1289
   Google Scholar
• Pjetursson BE, Sailer I, Zwahlen M, Hämmerle CH. A systematic review of the survival and complication rates of all-ceramic and metal-ceramic reconstructions after an observation period of at least 3 years. Part I: single crowns. Clin Oral Implants Res. 2007;18 Suppl 3:73–85
   PubMedGoogle Scholar
• Anusavice K. Standardizing failure, success, and survival decisions in clinical studies of ceramic and metal–ceramic fixed dental prostheses. Dent Mater. 2012;28:102–111
   Web of Science ®Google Scholar