Development of the Releasable Asbestos Field Sampler

References

• Framework for Investigating Asbestos-Contaminated Superfund Sites; Directive No. 9200.0-68; Prepared by the Asbestos Committee of the Technical Review Workgroup of the Office of Solid Waste and Emergency Response; U.S. Environmental Protection Agency: Washington, DC, 2008.
   Google Scholar
• Cherrie, J.W. The Effect of Room Size and General Ventilation on the Relationship between Near- and Far-Field Concentrations; Appl. Occup. Environ. Hyg. 1999, 14, 539–546.
   Google Scholar
• Standard Operating Procedure for Sampling Airborne Asbestos Fibers in a Laboratory Enclosure—a Qualitative Procedure; U.S. Environmental Protection Agency; Region 10: Seattle, WA, 2005.
   Google Scholar
• Berman, D.W.; Kolk, A.J. Modified Vertical Elutriator Method for the Determination of Asbestos in Soils and Bulk Materials; Draft Revision 1; Prepared for the U.S. Environmental Protection Agency, Region 8: Denver, CO, 2000.
   Google Scholar
• Thornburg, J.; Kominsky, J.; Brown, G.G.; Frechtel, P.; Barrett, W.; Shaul, G. A Model to Predict the Breathing Zone Concentrations of Particles Emitted from Surfaces; J. Environ. Monit. 2010; doi: 10.1039/6919385e.
   Google Scholar
• Hinds, W.C. Aerosol Technology, 2nd ed.; John Wiley and Sons: New York, 1999.
   Google Scholar
• Peters, T.M.; Leith, D. Concentration Measurement and Counting Efficiency of the Aerodynamic Particle Sizer 3321; J. Aerosol Sci. 2003, 34, 627–634.
   Google Scholar
• Thornburg, J.W.; Cooper, S.; Leith, D. Counting Efficiency of the API Aerosizer; J. Aerosol Sci. 1999, 30, 479–488.
   Google Scholar
• Mason, R.L.; Gunst, R.F.; Hess, J.L. Statistical Design and Analysis of Experiments; John Wiley & Sons: New York, 1989.
   Google Scholar
• Sumas River, Swift Creek, Drainage Asbestos Fiber Source Investigation; Publication No. 77-E00.2-11-1977; Washington State Department of Ecology: Olympia, WA, 1977.
   Google Scholar
• Suer, L. Asbestos Exposure and Human Health Risk Assessment, Asbestos Air Sampling, Conducted November 2–3, 2004, Clear Creek Management Area, California; Technical Memorandum; U.S. Environmental Projection Agency; Region 10: Seattle, WA, 2005.
   Google Scholar
• Wroble, J. Quality Assurance Project Plan for Activity-Based Sampling, Soil Sampling, Indoor Air Sampling, and Indoor Dust Sampling; Revision 3.0; U.S. Environmental Protection Agency; Region 10: Seattle, WA, 2006.
   Google Scholar
• Quality Assurance Project Plan (Field Sampling Plan), City of Coalinga Operable Unit 2 Asbestos Soil Sampling, Coalinga, California, Environmental Response Team; U.S. Environmental Protection Agency: Las Vegas, NV, 2007.
   Google Scholar
• Risk Evaluation for Sapphire Gem Mine Site Sapphire Valley, North Carolina; U.S. Environmental Protection Agency; Region 4: Atlanta, GA, 2008.
   Google Scholar
• Request for a Removal Action at the Vermont Asbestos Group Mine Site, Eden and Lowell, Orleans and Lamolie Counties; Action Memorandum; U.S. Environmental Protection Agency; Office of Remediation and Restoration: Washington, DC, 2007.
   Google Scholar
• Quality Assurance Project Plan (Field Sampling Plan), Big Tex Grain Site, 354 Blue Star Street, San Antonio, Texas; U.S. Environmental Protection Agency; Region 6: Dallas, TX, 2007.
   Google Scholar
• Vallero, D.A.; Kominsky, J.R.; Beard, M.E.; Crankshaw, O.S. Efficiency of Sampling and Analysis of Asbestos Fibers on Filter Media: Implications for Exposure Assessment; J. Occup. Environ. Hyg. 2009, 6, 62–72.
   Google Scholar
• Ambient Air Determination of Asbestos Fibres—Direct Transfer Transmission Electron Microscopy; Method ISO 10312; International Organization for Standardization: Geneva, Switzerland, 1995.
   Google Scholar
• Method for the Determination of Asbestos in Bulk Building Materials; EPA/600/R-93/116; U.S. Environmental Protection Agency: Washington, DC, 1993.
   Google Scholar
• Standard Test Method for Laboratory Determination of Water (Moisture) Content of Soil and Rock by Mass; Standard Method D 2216-5; American Society for Testing and Materials International: West Conshohocken, PA, 2005.
   Google Scholar