Influence of normalizing heat treatment on precipitation behaviour in modified 9Cr–1Mo steel

References

• Maruyama, K., Sawada, K. and Koike, J. (2001) Strengthening mechanisms of creep resistant tempered martensitic steel. ISIJ Int., 41 (6), 641–653.
   Web of Science ®Google Scholar
• Suzuki, K., Kumai, S., Kushima, H., Kimura, K. and Abe, E (2000) Heterogeneous recovery and precipitation of Z phase during long term creep deformation of modified 9Cr— 1Mo steel. Tetsu-to-Hagané, 86 (8), 550–557.
   Web of Science ®Google Scholar
• Hättestrand, M. and Andrén, H.O. (2001) Evaluation of particle size distribution of precipitates in a 9% chromium steel using energy filtered transmission electron microscopy. Micron, 32 (8), 789–797.
   Google Scholar
• Gustafson, A. and Hättestrand, M. (2002) Coarsening of precipitates in an advanced creep resistant 9% chromium steel - quantitative microscopy and simulations. Mater. Sci. Eng., A333(1-2), 279–286.
   Web of Science ®Google Scholar
• Yamada, K., Igarashi, M., Muneki, S. and Abe, E (2001) Creep properties affected by morphology of MX in high-Cr ferritic steels. ISIJ Int., 41(Suppl), S116— S120.
   Google Scholar
• Tokuno, K., Hamada, K., Uemori, R., Takeda, T. and Itoh, K. (1991) A complex carbonitride of niobium and vanadium in 9%Cr ferritic steels. Scripta Metall. Mater., 25 (4), 871 — 876.
   Web of Science ®Google Scholar
• Sawada, K., Kubo, K. and Abe, E (2003) Contribution of coarsening of MX carbonitrides to creep strength degradation in high chromium ferritic steel. Mater. Sci. Technol., 19 (6), 732–738.
   Web of Science ®Google Scholar
• Sawada, K., Hara, T., Kubo, K. and Abe, E (2002) Character-ization of MX distribution in P92 steel by EF-TEM. Proc. First International Conference on Advanced Structural Steels, May, pp. 179–180.
   Google Scholar
• Inoue, K., Ishikawa, N., Ohnuma, I., Ohtani, H. and Ishida, K. (2001) Calculation of Phase Equilibria between Austenite and (Nb, Ti, V)(C, N) in Microalloyed Steels. ISIJ Int., 41 (2), 175–182.
   Web of Science ®Google Scholar
• Suzuki, K., Kumai, S., Toda, Y., Kushima, H. and Kimura, K. (2003) Two-phase separation of primary MX carbonitride during tempering in creep resistant 9Cr1MoVNb steel. ISIJ Int., 43 (7), 1089–1094.
   Web of Science ®Google Scholar
• Taneike, M., Abe, E and Sawada, K. (2003) Creep-strengthen-ing of steel at high temperatures using nano-sized carbonitride dispersions. Nature, 424 (7), 294-296.
   Google Scholar
• Jones, W. B., Hills, C. R. and Polonis, D. H. (1991) Microstruc-tural evolution of modified 9Cr— 1Mo steel. Metall. Trans., A 22A(5), 1049–1058.
   Google Scholar
• Thomson, R. C. and Bhadeshia, H. K. D. H. (1992) Carbide precipitation in 12Cr1MoV power plant steel. Metall. Trans., 23A(4), 1171–1179.
   Web of Science ®Google Scholar
• Saroja, S., Vijayalakshmi, M. and Raghunathan, VS. (1992) Influence of cooling rates on the transformation behaviour of 9Cr— 1Mo-0.07C steel. J Mater Sci., 27 (9), 2389–2396.
   Web of Science ®Google Scholar
• Kim, H. D. and Kim, I. S. (1994) Effect of austenitizing temperature on microstructure and mechanical properties of 12% Cr steel. ISIJ Int., 34 (2), 198–204.
   Web of Science ®Google Scholar
• Janovec, J., Svobada, M. and Blach, J. (1998) Evolution of secondary phases during quenching and tempering 12% Cr steel. Mater. Sci. Eng., A249(1-2), 184–189.
   Web of Science ®Google Scholar
• Kobayashi, S., Toshimori, K., Nakai, K., Ohmori, Y, Asahi, H. and Muraki, T. (2002) Effects of boron addition on tempering processes in an Fe — 9Cr— 0.1C alloy martensite. ISIJ Int., 42(Suppl.), S72 — S76.
   Google Scholar
• Japan Industrial Standards: G 0552 (1998).
   Google Scholar
• Yoshino, M., Mishima, Y, Toda, Y, Kushima, H., Sawada, K. and Kimura, K. (2005) Phase equilibrium between austenite and MX carbonitride in a 9Cr— 1Mo— V—Nb steel. ISIJ Int., 45 (1), 107–115.
   Web of Science ®Google Scholar
• Iseda, A., Sawaragi, Y. and Yoshikawa, K. (1991) Effects of nitrogen content and tempering treatment on creep rupture properties of 9Cr— 1Mo— V—Nb steel with simulated HAZ heating. Tetsu-to-Hagané, 77 (4), 582–589.
   Web of Science ®Google Scholar
• Bhadeshia, H. K. D. H. (2001) Design of ferritic creep-resistant steels. ISIJ Int., 41 (6), 626–640.
   Web of Science ®Google Scholar