References
- Bobrow, J. E.: NC machine tool path generation from CSG part representations, Computer-Aided Design, 17, 1985, 69–76
- Chen, Y. J.; Ravani, B.: Offset surface generation and contouring in computer-aided design, ASME Journal of Mechanisms, Transmissions, and Automation in Design, 109, 1987, 133–142
- Choi, B. K.; Jerard R. B.: Sculptured Surface Machining: Theory and Applications, Kluwer Academic, London, 1998.
- Ding, S.; Mannan, M. A.; Poo, A. N.; Yang, D. C. H.; Han Z.: Adaptive iso-planar tool path generation for machining of freeform surfaces, Computer-Aided Design, 35, 2003, 141–153
- Dragomatz, D.; Mann, S.: A classified bibliography of literature on NC milling path generation, Computer-Aided Design, 29, 1997, 239–247
- Edelsbrunner, H.: Shape reconstruction with the Delaunay complex, Proceedings of LATIN’98: Theoretical Informatics, 1998, 119–132.
- Elber, G.; Cohen, E.: Tool path generation for freeform surfaces, Computer-Aided Design, 26, 1994, 490–496
- Feng, H. Y.; Li, H.: Constant scallop-height tool path generation for three-axis sculptured surface machining, Computer-Aided Design, 34, 2002, 647–654
- Feng, H. Y.; Teng, Z.: Iso-planar piecewise linear NC tool path generation from discrete measured data points, Computer-Aided Design, 37, 2005, 55–64
- Huang, Y.; Oliver, J. H.: Non-constant parameter NC tool path generation on sculptured surfaces, International Journal of Advanced Manufacturing Technology, 9, 1994, 281–290
- Inui, M.: Fast inverse offset computation using polygon rendering hardware, Computer-Aided Design, 35, 2003, 191–201
- Kim, B. H.; Choi, B. K.: Machining efficiency comparison direction-parallel tool path with contour-parallel tool path, Computer-Aided Design, 34, 2002, 89–95
- Kim, K. I.; Kim, K.: A new machine strategy for sculptured surfaces using offset surface, International Journal of Production Research, 33, 1995, 1683–1697
- Kunszt, P. Z.; Szalay, A. S.; Thakar, A. R.: The hierarchical triangular mesh, Mining the Sky: Proceedings of the MPA/ESO/MPE workshop, 2001, 631–637.
- Lee, E.: Contour offset approach to spiral tool path generation with constant scallop height, Computer-Aided Design, 35, 2003, 511–518
- Lin, R. S.; Koren, Y.: Efficient tool-path planning for machining freeform surfaces, ASME Journal of Engineering for Industry, 118, 1996, 20–28
- Loney, G. C.; Ozsoy, T. M.: NC machining of free form surfaces, Computer-Aided Design, 19, 1987, 85–90
- Maekawa, T.: An overview of offset curves and surfaces, Computer-Aided Design, 31, 1999, 165–173
- Mencl, R.; Müller, H.: Interpolation and approximation of surfaces from three-dimensional scattered data points, Proceedings of the Dagstuhl Conference on Scientific Visualization, 1997, 223–232.
- O’Rourke, J.: Computational Geometry in C, 2nd edition, Cambridge University Press, New York, NY, 1998.
- OuYang, D.; Van Nest, B. A.; Feng, H. Y.: Determining gouge-free ball-end mills for 3D surface machining from point cloud data, Robotics and Computer-Integrated Manufacturing, 21, 2005, 338–345
- Park, S. C.: Sculptured surface machining using triangular mesh slicing, Computer-Aided Design, 36, 2004, 279–288
- Pham, B.: Offset curves and surfaces: a brief survey, Computer-Aided Design, 24, 1992, 223–229
- Sarma, R.; Dutta, D.: The geometry and generation of NC tool paths, ASME Journal of Mechanical Design, 119, 1997, 253–258
- Suresh, K.; Yang, D. C. H.: Constant scallop-height machining of freeform surfaces, ASME Journal of Engineering for Industry, 116, 1994, 253–259
- Tournier, C.; Duc, E.: A surface based approach for constant scallop-height tool-path generation, International Journal of Advanced Manufacturing Technology, 19, 2002, 318–324
- http://www.b3dscann.com/samples.htm, Berding 3D Scanning.