References
- Bacchewar, P. B.; Singhal, S. K.; Pandey, P. M.: Statistical modelling and optimization of surface roughness in selective laser sintering process, Proc. IMechE Part B: J. of Engineering Manufacture., 221, 2007, 35–52
- Chua, C. K.; Leong, K. F.; Lim, C. S.: Rapid Prototyping: Principles and Applications, 2nd Edition, World Scientific, 2003.
- Cormier, D.; Unnanon, K.; Sanni, E.: Specifying non-uniform cusp heights as a potential for adaptive slicing, Rapid Prototyping Journal, 6(3), 2000, 204–211.
- Dolenc, A.; Makela, I.: Slicing procedure for layered manufacturing techniques, Computer Aided Design, 1(2), 1994, 4–12.
- Frank, D.; Fadel G.: Expert system based selection of the preferred direction of build for rapid prototyping, Journal of Intelligent Manufacturing, 6, 1994, 334–339
- Hope, R. L.; Jacobs, P. A.; Roth, R. N.: Rapid prototyping with sloping surfaces, Rapid Prototyping Journal, 3(1), 1997, 12–19.
- Hope, R. L.; Roth, R. N.; Jacobs, P. A.: Adaptive slicing with sloping layer surfaces, Rapid Prototyping Journal, 3(3), 1997, 89–98.
- Jamieson, R.; Hacker, H.: Direct slicing of CAD models for rapid prototyping, Rapid Prototyping Journal, 3(1), 1995, 12–19.
- Kruth, J. P.; Leu, M. C. T.: Nakagawa, Progress in additive manufacturing and rapid prototyping, Annals of CIRP, 47(2), 1998, 525–540.
- Kulkarni, P.; Dutta, D.: An accurate slicing procedure for layered manufacturing, Computer Aided Design, 28(9), 1996, 683–697.
- Lee, K. H.; Choi, K.: Generating optimal sliced data for layered manufacturing, International Journal of Advanced Manufacturing Technology, 16, 2000, 277–284
- Pandey, P. M.; Reddy, N. V.; Dhande, S. G.: Slicing procedures in layered manufacturing: a review, Rapid Prototyping Journal, 9 (5), 2003, 274–288.
- Pandey, P. M.; Reddy, N. V.; Dhande, S. G.: Real time adaptive slicing for fused deposition modelling, International Journal of Machine tools and Manufacture, 43(1), 2003, 61–71.
- Sabourin, E.; Houser, S. A.; Bohn, J. H.: Adaptive slicing using stepwise uniform refinement, Rapid Prototyping Journal, 2(4), 1996, 20–26.
- Sabourin, E.; Houser, S. A.; Bohn, J. H.: Accurate exterior, fast interior layered manufacturing, Rapid Prototyping Journal, 3(2), 1997, 44–52.
- Tyberg, J.; Bohn, J. H.: Local adaptive slicing, Rapid Prototyping Journal, 4(3), 1998, 118–127.
- Tyberg, J.; Bohn, J. H.: FDM systems and local adaptive slicing, Materials and Design, 20, 1999, 77–82
- Wholers, T.: Future potential of rapid prototyping and manufacturing around the world, Rapid Prototyping Journal, 1(1), 1995, 4–10.
- Zhao, Z.; Laperriere, L.: Adaptive direct slicing of the solid model for rapid prototyping, International Journal of Production Research, 38(3), 2000, 89–98.