Simulating the Interaction between a Respirator and a Headform Using LS-DYNA

References

• Akbar-Khanzadeh, F.; Bisesi, M.S.; Rivas, R.D.: Comfort of personal protective equipment, Applied Ergonomics, 26(3), 1995, 195–198.
   PubMed Web of Science ®Google Scholar
• Bitterman, B. H.: Application of Finite Element Modeling and Analysis to the Design of Positive Pressure Oxygen Masks, Master Thesis, Air Force Institute of Technology, Wright-Patterson Air Force Base, OH, 1991.
   Google Scholar
• Cohen, K. S.: Relationship of Protective Mask Seal Pressure to Fit Factor and Head Harness Strap Stretch, Technical Report, Army Research Laboratory, Human Engineering and Research Directorate, Maryland, 1999.
   Google Scholar
• Dai, J; Yang, J.; Zhuang, Z.: Finite Element Analysis for the Interface of a Respirator and the Human Face-A Pilot Study, SAE Digital Human Modeling for Design and Engineering, June 9–11, 2009, Gothenburg, Sweden.
   Google Scholar
• Damascene, J.; Abeysekera, A.; Houshang, S.: Ergonomics aspects of personal protective equipment: its use in industrially developing countries, Journal of Human Ergology, 17, 1988, 67–79.
   PubMedGoogle Scholar
• Goldberg, M. N.: Individual respiratory protection against chemical and biological agents. Final report, Sections I and II, Unpublished manuscript, Edgewood Arsenal, MD: Defense Development and Engineering Laboratories, Physical Protection Laboratory, 1970.
   Google Scholar
• Goldberg, M. N.; Jones, R. E.; Wang, Y.; Crooks, T. P.: Individual respiratory protection against chemical and biological agents. Eleventh quarterly progress report (AD No. 8236533). Edgewood Arsenal, MD: Defense Development and Engineering Laboratories, Physical Protection Laboratory, 1967.
   Google Scholar
• Goldberg, M. N.; Raeke, J. W.; Jones, R. E.; Santschi, W. R.: Individual respiratory protection against chemical and biological agents. Sixth quarterly progress report (CB- 042964). Edgewood Arsenal, MD: Defense Development and Engineering Laboratories, Physical Protection Laboratory, 1966.
   Google Scholar
• Jelier, P.; Hughes, S.: Mechanical and anthropometric characteristics of soft tissue lavers in the head and maxillofacial region using combined mechanical and ultrasound techniques, Unpublished manuscript, University of Surrey, Guildford, UK, 1994.
   Google Scholar
• Lu, C.: Biomechanical comfort modeling of the M40 military gas mask. Unpublished manuscript. Aberdeen Proving Ground, MD: U.S. Army Research Laboratory, 1995.
   Google Scholar
• Manninen, A.; Klen, T.; Pasanen, P.: Evaluation of Comfort and Seal Leakages of Several Respirators Used in Agricultural Work, American Industrial Hygiene Association Journal, 49(6), 1988, 280–285.
   PubMed Web of Science ®Google Scholar
• Mols, G.; Von Ungern-Sternberg, B. C.; Rohr, E. C.; Haberthur, C.; Geiger, K.; Guttmann, J.: Respiratory comfort and breathing pattern during volume proportional assist ventilation and pressure support ventilation: A study on volunteers with artificially reduced compliance, Critical Care Medicine. 28(6), 2000, 1940–1946.
   PubMed Web of Science ®Google Scholar
• Piccione, D.; Moyer Jr, E. T.; Cohen, K. S.: Modeling the Interface between a Respirator and the Human Face, Technical Report, Army Research Laboratory, Human Engineering and Research Directorate, Maryland, 1997.
   Google Scholar
• Shimozaki, S.; Harber, P.; Barrett, T.; Loisides, P.: Subjective tolerance of respirator loads and its relationship to physiological effects, Am. Ind. Hyg. Assoc. J. 49(3), 1988, 108–116.
   PubMed Web of Science ®Google Scholar
• Snook, S. H.; Hinds, W. C.; Burgess, W. M. A.: Respirator Comfort: Subjective Response to Force Applied to the Face, American Industrial Hygiene Association Journal, 27(2), 1966, 93–97.
   PubMed Web of Science ®Google Scholar
• Weiss, R. A.; Pasternak-Silva, J.: Physiological Evaluation of First Responder Mask, Army Research Laboratory, Human Engineering and Research Directorate, Maryland, 2003.
   Google Scholar
• White, M. K.: Work tolerance and subjective responses to wearing protective clothing and respirators during physical work, Ergonomics, 32(9), 1989, 1111–1123.
   PubMed Web of Science ®Google Scholar
• Zhuang, Z.; Bradtmiller, B.: Head and face anthropometric survey of U.S. respirator users, J. Occup. Environ. Hyg., 2, 2005, 567–576.
   PubMed Web of Science ®Google Scholar
• Zhuang, Z.; Bradtmiller, B.; Shaffer, R.: New Respirator Fit Test panels representing the current U.S. Civilian Work Force, J. Occup. Environ. Hyg., 4, 2007, 647–659.
   PubMed Web of Science ®Google Scholar
• Zhuang, Z.; Viscusi, D.: A new approach to developing digital 3-D headforms, SAE Digital Human Modeling for Engineering and Design, June 14–17, 2008, Pittsburgh, PA.
   Google Scholar