References
- Balasubramaniam, M.; Laxmiprasad, P.; Sarma, S.; Shaikh, Z.: Generating 5-axis NC Roughing Paths Directly from a Tessellated Representation, Computer Aided Design, 32, 2000, 261–277.
- Bohez, E. L. J.; Senadhera, S. D. R.; Pole, K.; Duflou, J. R.; Tar, T.: A geometric modeling and fiveaxis machining algorithm for centrifugal impellers, Journal of Manufacturing Systems, 16(6), 1997, 422–436.
- Chang, H.-C.; and Lin, A.-C.: Automatic Inspection of Turbine Blades Using a 3-axis CMM together with a 2-axis Dividing Head, The International Journal of Advanced Manufacturing Technology, 26(7–8), 2005.
- Choi, B.-K.: Surface Modeling for CAD/CAM, Elsevier, 1991.
- Chuang, L.-C.; Young, H.-T.: Integrated rough machining methodology for centrifugal impeller manufacturing. International Journal of Advanced Manufacturing Technology, August, 2006, (published on-line first).
- Heo, E.-Y.; Kim, D.-W.; Lee, J.-Y.; Lee, H.-L.; Kim, B.-H.: Hybrid Rough-Cut Machining of an Impeller with a 5-axis NC Machine, The 18th Int. Conf. on Flexible Automation and Intelligent Manufacturing, FAIM2008 Proceedings, Skövde, Sweden, 2008.
- Kim, B.-H.; Heo, E.-Y.; Kim, D.-W.; Jang, D.-K.; Chen, F. F.: Effective Rough Machining of an Impeller with a 5-axis NC Machine, The 17th Int. Conf. on Flexible Automation and Intelligent Manufacturing, FAIM2007 Proceedings, Philadelphia, USA, 2007.
- Morishige, K.; Takeuchi, Y.: 5-Axis Control Rough Cutting of an Impeller with Efficiency and Accuracy, Proceedings of the 1997 IEEE International conference on Robotics and Automation, 1997, 1241–1246.
- Yau, H.-T.; Lai, G.-Y.; Menq, C.-H.; Miller, R.-A.: Statistical Evaluation of Form Tolerances Using Discrete Measurement Data, Proceedings of the Symposium on Advances in Integrated Product Design and Manufacturing, ASME Winter Annual Meeting, Dallas, TX, 1990.
- Young, H.-T.; Chuang, L. C.; Gershwiler, K.: A Five-axis Rough Machining Approach for a Centrifugal Impeller, International Journal of Advanced Manufacturing Technology, 23, 2004, 233–239.
- Young, H.-T.; Chuang, L.-C.: An integrated machining approach for a centrifugal impeller, International Journal of Advanced Manufacturing Technology, 21, 2003, 556–563.