References
- Almusallam, T. H. 2007. Behavior of normal and high-strength concrete cylinders confined with E-glass/epoxy composite laminates, Composites Part B 38: 629–639. http://dx.doi.org/10.1016/j.compositesb.2006.06.021
- Becque, J.; Patnaik, A.; Rizkalla, S. H. 2003. Analytical models for concrete confined with FRP tubes, ASCE Journal of Composites for Construction 7(1): 31–8. http://dx.doi.org/10.1061/(ASCE)1090-0268(2003)7:1(31)
- Benzaid, R. 2010. Contribution à l’étude des matériaux composites dans le renforcement et la réparation des eléments structuraux linéaires en béton: Thèse de Doctorat, INSA de Rennes, France, 280 p. ( in French).
- Benzaid, R.; Chikh, N. E.; Mesbah, H. 2008. Behaviour of square concrete columns confined with GFRP composite wrap, Journal of Civil Engineering and Management 14(2): 115–120. http://dx.doi.org/10.3846/1392-3730.2008.14.6
- Benzaid, R.; Chikh, N. E.; Mesbah, H. 2009. Study of the compressive behavior of short concrete columns confined by fiber reinforced composite, Arabian Journal for Science and Engineering 34(1B): 15–26.
- Benzaid, R.; Mesbah, H.; Chikh, N. E. 2010. FRP-confined concrete cylinders: axial compression experiments and strength model, Journal of Reinforced Plastics and Composites 29(16): 2469–2488. http://dx.doi.org/10.1177/0731684409355199
- Berthet, J. F.; Ferrier, E.; Hamelin, P. 2006. Compressive behavior of concrete externally confined by composite jackets – part B: modeling, Construction and Building Materials 20: 338–347. http://dx.doi.org/10.1016/j.conbuildmat.2005.01.029
- Campione, G.; Miraglia, N.; Papia, M. 2004. Strength and strain enhancements of concrete columns confined with FRP sheets, Journal of Structural Engineering and Mechanics 18(6): 769–790. http://dx.doi.org/10.12989/sem.2004.18.6.769
- Chaallal, O.; Hassen, M.; Shahawy, M. 2003. Confinement model for axially loaded short rectangular columns strengthened with FRP polymer wrapping, ACI Structural Journal 100(2): 215–221.
- Cusson, D.; Paultre, P. 1995. Stress-strain model for confined high-strength concrete, ASCE Journal of Structural Engineering 121(3): 468–477. http://dx.doi.org/10.1061/(ASCE)0733-9445(1995)121:3(468)
- De Lorenzis, L.; Tepfers, R. 2003. A comparative study of models on confinement of concrete cylinders with fiberreinforced polymer composites, ASCE Journal of Composites for Construction 7(3): 219–237. http://dx.doi.org/10.1061/(ASCE)1090-0268(2003)7:3(219)
- De Lorenzis, L.; Tepfers, R. 2001. A comparative study of models on confinement of concrete cylinders with FRP composites. Work No. 46, Publication 01:04. Division of Building Technology, Chalmers University of Technology, Sweden. 81 p.
- Demer, M.; Neale, K. W. 1994. Strengthening of concrete columns with unidirectional composite sheets, in Mufti, A. A.; Bakht, B.; Jaeger, L. G. (Eds). Development in Short and Medium Span Bridge Engineering'94, Proceedings of the fourth International Conference on Short and Medium Span Bridges, Canadian Society For Civil Engineering, MontrealCanada, 895–905.
- Fardis, M. N.; Khalili, H. H. 1982. FRP-encased concrete as a structural material, Magazine of Concrete Research 34(121): 191–202. http://dx.doi.org/10.1680/macr.1982.34.121.191
- Ilki, A. 2006. FRP strengthening of RC columns (Shear, Confinement and Lap Splices), in Retrofitting of Concrete Structures by Externally Bonded FRPs, with Emphasis on Seismic Applications, Fib Bulletin 35, Lausanne, Swiss, 123–142.
- Ilki, A.; Kumbasar, N.; Koç, V. 2003. Low and medium strength concrete members confined by fiber reinforced polymer jackets, ARI The Bulletin of the Istanbul Technical University 53(1): 118–123.
- Jiang, T.; Teng, J. G. 2007. Analysis-oriented stress-strain models for FRP-confined concrete, Engineering Structures 29: 2968–2986. http://dx.doi.org/10.1016/j.engstruct.2007.01.010
- Karabinis, A. I.; Rousakis, T. C. 2001. A model for the mechanical behaviour of the FRP confined columns, in Proceedings of the International Conference on FRP Composites in Civil Engineering, Hong Kong, China, 317–326.
- Karbhari, V. M.; Gao, Y. 1997. Composite jacketed concrete under uniaxial compression – verification of simple design equations, ASCE Journal of Materials in Civil Engineering 9(4): 185–193. http://dx.doi.org/10.1061/(ASCE)0899-1561(1997)9:4(185)
- Lam, L.; Teng, J. G. 2002. Strength models for fiber-reinforced plastic confined concrete, ASCE Journal of Structural Engineering 128(5): 612–623. http://dx.doi.org/10.1061/(ASCE)0733-9445(2002)128:5(612)
- Lam, L.; Teng, J. G. 2003b. Design-oriented stress-strain model for FRP-confined concrete in rectangular columns, Journal of Reinforced Plastics and Composites 22(13): 1149–1186. http://dx.doi.org/10.1177/0731684403035429
- Lam, L.; Teng, J. G. 2003a. Design-oriented stress-strain model for FRP confined concrete, Construction and Building Materials 17: 471–489. http://dx.doi.org/10.1016/S0950-0618(03)00045-X
- Lam, L.; Teng, J. G.; Cheung, C. H.; Xiao, Y. 2006. FRP-confined concrete under axial cyclic compression, Cement and Concrete Composites 28: 979–958. http://dx.doi.org/10.1016/j.cemconcomp.2006.07.007
- Malvar, L. J.; Morrill, K. B.; Crawford, J. E. 2004. Numerical modeling of concrete confined by fiber-reinforced composites, ASCE Journal of Composites for Construction 8(4): 315–322. http://dx.doi.org/10.1061/(ASCE)1090-0268(2004)8:4(315)
- Mander, J. B.; Priestley, M. J. N.; Park, R. 1988. Theoretical stress-strain model for confined concrete, ASCE Journal of Structural Engineering 114(8): 1804–1826. http://dx.doi.org/10.1061/(ASCE)0733-9445(1988)114:8(1804)
- Matthys, S.; Toutanji, H.; Audenaert, K.; Taerwe, L. 2005. Axial load behavior of large-scale columns confined with fiber-reinforced polymer composites, ACI Structural Journal 102(2): 258–267.
- Mirmiran, A.; Shahawy, M. 1997. Behavior of concrete columns confined by fiber composites, ASCE Journal of Structural Engineering 123(5): 583–590. http://dx.doi.org/10.1061/(ASCE)0733-9445(1997)123:5(583)
- Mirmiran, A.; Shahawy, M.; Samaan, M.; El Echary, H. 1998. Effect of column parameters on FRP-confined concrete, ASCE Journal of Composites for Construction 2(4): 175–185.
- Miyauchi, K.; Inoue, S.; Kuroda, T.; Kobayashi, A. 1999. Strengthening effects of concrete columns with carbon fiber sheet, Transactions of the Japan Concrete Institute 21: 143–150.
- Moran, D. A.; Pantelides, C. P. 2002. Variable strain ductility ratio for fiber reinforced polymer-confined concrete, ASCE Journal of Composites for Construction 6(4): 224–232. http://dx.doi.org/10.1061/(ASCE)1090-0268(2002)6:4(224)
- NF EN ISO 527-1: 1993. Determination of tensile properties of plastics materials. Part 1: general principles. ISO International Standards. 9 p.
- NF EN ISO 527-2: 1993. Determination of tensile properties of plastics materials. Part 2: test conditions for moulding and extrusion plastics. ISO International Standards. 5 p.
- NF EN ISO 527-5: 1997. Determination of tensile properties of plastics materials. Part 5: test conditions for unidirectional fibre-reinforced plastic composites. ISO International Standards. 9 p.
- Park, R.; Paulay, T. 1975. Reinforced concrete structures. New York: John Wiley and Sons. 800 p. http://dx.doi.org/10.1002/9780470172834
- Piekarczyk, J.; Piekarczyk, W.; Blazewicz, S. 2011. Compression strength of concrete cylinders reinforced with carbon fiber laminate, Construction and Building Materials 25: 2365–2369. http://dx.doi.org/10.1016/j.conbuildmat.2010.11.035
- Richart, F. E.; Brandtzaeg, A.; Brown, R. L. 1929. The failure of plain and spirally reinforced concrete in compression. Bulletin No. 190, Engineering Experiment Station, University of Illinois, Urbana, USA.
- Rochette, P. 1996. Confinement de colonnes courtes en béton de section carrée ou rectangulaire avec des matériaux composites, Maîtrise Es-Sciences Appliquées, Université de Sherbrooke, Canada. 115 p. ( in French).
- Rochette, P.; Labossière, P. 2000. Axial testing of rectangular column models confined with composites, ASCE Journal of Composites for Construction 4(3): 129–136.
- Rousakis, T. C.; Karabinis, A. I. 2008. Substandard reinforced concrete members subjected to compression: FRP confining effects, RILEM Materials and Structures 41(9): 1595–1611. http://dx.doi.org/10.1617/s11527-008-9351-4
- Saadatmanesh, H.; Ehsani, M. R.; Li, M. W. 1994. Strength and ductility of concrete columns externally reinforced with composites straps, ACI Structural journal 91(4): 434–447.
- Saafi, M.; Toutanji, H. A.; Li, Z. 1999. Behavior of concrete columns confined with fiber reinforced polymer tubes, ACI Materials Journal 96(4): 500–509.
- Samaan, M.; Mirmiran, A.; Shahawy, M. 1998. Model of confined concrete by fiber composites, ASCE Journal of Structural Engineering 124(9): 1025–1031. http://dx.doi.org/10.1061/(ASCE)0733-9445(1998)124:9(1025)
- Shahawy, M.; Mirmiran, A.; Beitelman, T. 2000. Tests and modeling of carbon-wrapped concrete columns, Composites Part B 31(6): 471–480. http://dx.doi.org/10.1016/S1359-8368(00)00021-4
- Shehata, I. A. E. M.; Carneiro, L. A. V.; Shehata, L. C. D. 2002. Strength of short concrete columns confined with CFRP sheets, RILEM Materials and Structures 35: 50–58. http://dx.doi.org/10.1617/13686
- Siddhawartha, M.; Hoskin, A.; Fam, A. 2005. Influence of concrete strength on confinement effectiveness of fiberreinforced polymer circular jackets, ACI Structural Journal 102(3): 383–392.
- Spoelstra, M. R.; Monti, G. 1999. FRP-confined concrete model, ASCE Journal of Composites for Construction 3(3): 143–150.
- Teng, J. G.; Chen, J. F.; Smith, S. T.; Lam, L. 2002. FRP strengthened RC structures. Chichester: John Wiley and Sons Ltd. 245 p.
- Teng, J. G.; Huang, Y. L.; Lam, L.; Ye, L. P. 2007. Theoretical model for fiber reinforced polymer-confined concrete, ASCE Journal of Composites for Construction 11(2): 201–210.
- Thériault, M.; Neale, K. W. 2000. Design equations for axiallyloaded reinforced concrete columns strengthened with FRP wraps, Canadian Journal of Civil Engineering 27(5): 1011–1020. http://dx.doi.org/10.1139/l00-019
- Toutanji, H. 1999. Stress-strain characteristics of concrete columns externally confined with advanced fiber composite sheets, ACI Materials Journal 96(3): 397–404.
- Vintzileou, E.; Panagiotidou, E. 2008. An empirical model for predicting the mechanical properties of FRP-confined concrete, Construction and Building Materials 22: 841–854. http://dx.doi.org/10.1016/j.conbuildmat.2006.12.009
- Wu, G.; Lu, Z. T.; Wu, Z. S. 2006. Strength and ductility of concrete cylinders confined with FRP composites, Construction and Building Materials 20: 134–148. http://dx.doi.org/10.1016/j.conbuildmat.2005.01.022
- Xiao, Y.; Wu, H. 2003. Compressive behavior of concrete confined by various types of FRP composite jackets, Journal of Reinforced Plastics and Composites 22(13): 1187–1201. http://dx.doi.org/10.1177/0731684403035430
- Yang, X.; Nanni, A.; Chen, G. 2001. Effect of corner radius on the performance of externally bonded reinforcement, in Proceedings of The Fifth International Symposium on Fiber Reinforced Polymer for Reinforced Concrete Structures (FRPRCS-5), Cambridge, London, 197–204.
- Youssef, M. N.; Feng, M. Q.; Mosallam, A. S. 2007. Stressstrain model for concrete confined by FRP composites, Composites: Part B 38: 614–628. http://dx.doi.org/10.1016/j.compositesb.2006.07.020