References
- Banfill, P.-F.-G. 2003. The rheology of fresh cement and concrete – a review, in Proc. of 11th International Cement Chemistry Congress, May 2003, Durban, South Africa, 1–13.
- Claisse, P. A.; Lorimer, P.; Omari, M. A. 2001. Workability of cement pastes, ACI Materials Journal 98(6): 476–482.
- Eisinas, A.; Baltakys, K. 2009. The possibility of determination of portlandite content in Portland cement was examined by simultaneous thermal analysis, Cheminė Technologija 50: 18–23.
- EN 196-1 Methods of testing cement. Determination of strength. European Committee for Standardization, Brussels, 2005. 36 p.
- Esteves, L. P.; Cachim, P. B.; Ferreira, V. M. 2010. Effect of fine aggregate on the rheology properties of high performance cement-silica systems, Construction and Building Materials 24(5): 640–649. http://dx.doi.org/10.1016/j.conbuildmat.2009.11.005
- Ferraris, C. F.; Gaidis, J.-M. 1992. Connection between the rheology of concrete and rheology of cement paste, ACI Materials Journal 88(4): 388–393.
- Flatt, R. J.; Houst, Y. F. 2001. A simplified view on chemical effects perturbing the action of superplasticizers, Cement and Concrete Research 31(8): 1169–1176. http://dx.doi.org/10.1016/S0008-8846(01)00534-8
- Janavičius, E.; Daukšys, M.; Skripkiūnas, G.; Nagrockienė, D.; Daugėlienė, A. 2013. The effect of cement modification on the rheological properties of cement paste, Journal of Civil Engineering and Management 19(1): 125–130. http://dx.doi.org/10.3846/13923730.2013.851111
- Jiang, S. P.; Mutin, J. C.; Nonat, A. 1995. Studies on mechanisms and physico-chemical parameters at the origin of cement setting. 1. The fundamental processes involved during the cement setting, Cement and Concrete Research 25(4): 779–789. http://dx.doi.org/10.1016/0008-8846(95)00068-N
- Justnes, H. 2007. Calcium nitrate as multifunctional concrete admixture, in Slovenian Colloquium on Concrete, 29 May 2007, Ljubljana, Slovenia, 21–28.
- Justnes, H. 1993. SINTEF structures and concrete. Report STF70 F93138. Norway, Trondheim. 40 p.
- Karagöl, F.; Demirboğa, R.; Kaygusuz, M.-A.; Yadollahi, M. M.; Polat, R. 2013. The influence of calcium nitrate as antifreeze admixture on the compressive strength of concrete exposed to low temperatures, Cold Region Science and Technology 89: 30–35. http://dx.doi.org/10.1016/j.coldregions.2013.02.001
- Karagöl, F.; Demirboğa, R.; Kaygusuz, M.-A.; Yadollahi, M. M. 2011. The influence of calcium nitrate on the compressive strength of concrete exposed to freezing weather, in International Balkans Conference on Challenges of Civil Engineering, BCCCE, 19–21 May 2011, EPOKA University, Tirana, Albania, 1–8.
- Lapasin, R.; Papo, A.; Rajgelj, S. 1983. Flow behavior of fresh cement pastes. A comparison of different rheological instruments and technique, Cement and Concrete Research 13(3): 349–356. http://dx.doi.org/10.1016/0008-8846(83)90034-0
- Macijauskas, M.; Gailius, A. 2014. Influence of cement type and admixtures on rheological properties of cement pastes, Engineering Structures and Technologies 5(4): 175–181. http://dx.doi.org/10.3846/2029882X.2014.912431
- Miranda, C. R.; Petrobas, R. D.; Fairbairn, T. 2010. New design of high-performance cement systems for zonal isolation: influence on porosity, rheological parameters and chemical and mechanical resistance, in Proc. of the SPE Latin American and Caribbean Petroleum Engineering Conference, 1–3 December 2010, Lima, Peru. 12 p. http://dx.doi.org/10.2118/139307-MS
- Nedhi, M.; Rahman, M.-A. 2004. Estimating rheological properties of cement pastes using various rheological models for different test geometry, gap and surface friction, Cement and Concrete Research 34(11): 1993–2007. http://dx.doi.org/10.1016/j.cemconres.2004.02.020
- Ng, S.; Justnes, H. 2015. Influence of dispersing agents on the rheology and early heat of hydratation of blended cements with high loading of calcined marl, Cement and Concrete Composites 60: 123–134. http://dx.doi.org/10.1016/j.cemconcomp.2015.04.007
- Nonat, A.; Mutin, J. C.; Lecoq, X.; Jiang, S. P. 1997. Physico-chemical parameters determining hydration and particle interactions during the setting of silicate cements, Solid State Ionics 101–103: 923–930. http://dx.doi.org/10.1016/S0167-2738(97)00386-X
- Popovics, S. 1992. Concrete materials: properties, specifications and testing. 2nd ed. Noyes: William Andrew Publishing. 661 p.
- Puertas, F.; Varga, C.; Alonso, M. M. 2014. Rheology of alkali-activated slag pastes. Effect of the nature and concentration of the activating solution, Cement and Concrete Composites 53: 279–288. http://dx.doi.org/10.1016/j.cemconcomp.2014.07.012
- Ramachandran, V. S. 1995. Concrete admixtures handbook. 2nd ed. Cambridge: Cambridge University Press. 1183 p.
- Ramachandra, V.-S. 1972. Elucidation of the role of chemical admixtures in hydrating cements by DTA technique, Thermochimica Acta 4: 343–366. http://dx.doi.org/10.1016/0040-6031(72)87017-5
- Rixom, R.; Mailvaganam, N. 1999. Chemical admixtures for concrete. 3th ed. E&FN Spon. 456 p. http://dx.doi.org/10.4324/9780203017241
- Roussel, N.; Cussigh, F. 2008. Distinct-layer casting of SCC: the mechanical consequences of thixotropy, Cement and Concrete Research 38(5): 624–632. http://dx.doi.org/10.1016/j.cemconres.2007.09.023
- Roussel, N.; Ovarlez, G.; Garrault, S.; Brumaud, C. 2012.The origins of thixotropy of fresh cement pastes, Cement and Concrete Research 42(1): 148–157. http://dx.doi.org/10.1016/j.cemconres.2011.09.004
- Saak, A. W.; Jennings, H. M.; Shah, S.-P. 2001. The influence of wall slip on yield stress and viscoelastic measurements of cement paste, Cement and Concrete Research 31(2): 205–212. http://dx.doi.org/10.1016/S0008-8846(00)00440-3
- Skripkiūnas, G.; Daukšys, M. 2004. Dilatancy of cement slurries with chemical admixtures, Journal of Civil Engineering and Management 10(3): 227–233. http://dx.doi.org/10.1080/13923730.2004.9636310
- Skripkiūnas, G.; Daukšys, M.; Štuopys, A.; Levinskas, R. 2005. The Influence of cement particles shape and concentration on the rheological properties of cement slurry, Materials Science (Medžiagotyra) 11(2): 150–158.
- Struble, L. J.; Wei-Guo, L. 1995. Rheological changes associated with setting of cement paste, Advanced Cement Based Materials 2(6): 224–230. http://dx.doi.org/10.1016/1065-7355(95)90041-1
- Tang, C. W.; Yen, T.; Chang, C. S.; Chen, K.-H. 2001. Optimizing mixture propertions for flowable high-performance concrete via rheology tests, ACI Materials Journal 98(6): 493–502.
- Tattersall, G. H.; Banfill, P. F. G. 1983. The rheology of fresh concrete. London: Pitman Advanced Publishing Program. 278 p.
- Yahia, A. 2011. Shear-thickening behaviour of high-performance cement grouts-influencing mix-design parameters, Cement and Concrete Research 41(3): 230–235. http://dx.doi.org/10.1016/j.cemconres.2010.11.004
- Yahia, A.; Tanimura, M. 2015. Rheology of belite-cement-Effect of w/c and high-range water-reducer type, Construction and Building Materials 88: 169–174. http://dx.doi.org/10.1016/j.conbuildmat.2015.03.029