Workload estimation of harvesters during the operations of work cycle

References

• Aleksandrov, A. V. 1983. Nauchnye Osnovy Dinamiki Rabochih Processov i Prognozirovanie Nagruzhennosti Lesosechnyh Mashin s Manipulyatorami. Avtoreferat dissertacii na soiskanie uchyonoj stepeni doktora tehnicheskih nauk. Leningrad. 34 s. (in Russian).
   Google Scholar
• Asmolovskij, M. K.; Klokov, D. V. 1996. Metodika ocenki jekspluatacionnoj jeffektivnosti koyosnoj transportno-pogruzochnoj lesozagotovitel'noj mashiny, Trudy BGTU: Lesnaya i Derevoobrabatyvayushhaya promyshlennost 4: 20–27 ( in Russian).
   Google Scholar
• Azad, N. L. 2006. Dynamic Modelling and Stability Controller Development for Articulated Steer Vehicles. A thesis presented to the University of Waterloo in fulfillment of the thesis requirement for the degree of Doctor of Philosophy in Mechanical Engineering. Waterloo, Ontario, Canada. 177 p.
   Google Scholar
• Bendat, J. S.; Piersol, A. G. 1966. Measurement and Analysis of Random Data. 2nd printing ed. John Wiley & Sons. 390 p.
   Google Scholar
• Budevich, E. A. 2006. Nagruzhennost’ Valochno-Suchkorezno-Raskryazhevochnyh Mashin v Processe Ochistki Derev'ev ot Such'ev. Avtoreferat dissertacii na soiskanie uchyonoj stepeni kandidata tehnicheskih nauk. Petrozavodsk. 20 s. (in Russian).
   Google Scholar
• Doronin, S. V.; Lepichin, A. M.; Moskvichyov, V. V.; Shokin, Yu. I. 2005. Modelirovanije Prochnosti i Razrusheniya Nesushhih Tehnicheskih Sistem. Nauka, Novosibirsk. 250 s. (in Russian).
   Google Scholar
• Eliasson, L.; Bengtsson, J.; Cedergren, J.; Lageson, H. 1999. Comparison of single-grip harvester productivity in clear- and shelterwood cutting, Journal of Forest Engineering 10(1): 43–48.
   Google Scholar
• Fedorenchik, A. S.; Turlaj, I. V. 2002. Harvestery. Izdatel'stvo BGTU, Minsk. 172 s. (in Russian).
   Google Scholar
• Fedorenchik, A. S.; Zhorin, A. V.; Klokov, D. V. 1997. Sravnitel'naya ocenka raboty lesnyh mashin po pokazatelyam Jenergoyomkosti, Trudy BGTU: Lesnaya i Derevoobrabatyvayushhaya promyshlennost’ 5: 20–26 ( in Russian).
   Google Scholar
• Gellerstedt, S. 2002. Operation of the single-grip harvester: motor-sensory and cognitive work, International Journal of Forest Engineering 13(2): 35–47.
   Google Scholar
• Ginzburg, Yu. V.; Shved, A. I.; Parfyonov, A. P. 1986. Promyshlennye Traktory. Mashinostroenie, Moskva. 296 s. (in Russian).
   Google Scholar
• Goronovskij, A. R.; Golyakewich, S. A. 2010. Primenenie jenergeticheskogo potenciala proizvoditel'nosti pri ocenke jeffektivnosti raboty lesozagotovitel'nyh mashin, in Ustojchivoe Upravlenie Lesami i Racional'noe Lesopol'zovanie: Materialy Mezhdunarodnoj Nauchno-Prakticheskoj Konferencii, maya 2010 goda, Minsk. Kniga 1, 140–144 (in Russian).
   Google Scholar
• Heinze, A. 2007. Modelling, Simulation and Control of a Hydraulic Crane. Submitted for the Degree of Master of Science in Automotive Mechatronics at Munich University of Applied Sciences. 137 p.
   Google Scholar
• Kochnev, A. M.; Valyazhonkov, V. D.; Pamfilov, D. V. 1990. Issledovanie uprugodempfiruyushhich svojstv gidroprivoda mehanizma skladyvaniya trelevochnyh traktorov, Lesnoj Zhurnal (1): 43–48 ( in Russian).
   Google Scholar
• Löfgren, B. 2009. Kinematic Control of Redundant Knuckle Booms with Automatic Path Following Functions. Doctoral thesis. Royal Institute of Technology, Stockholm. 158 p.
   Google Scholar
• Papadopoulos, E.; Mu, B.; Frenette, R. 1997. Modeling and identification of an electrohydraulic articulated forestry machine, in 1997 IEEE International Conference on Robotics and Automation: Proceedings, April 20–25, 1997, Albuquerque, NM. Vol. 1, 60–65. http://dx.doi.org/10.1109/ROBOT.1997.620016
   Google Scholar
• Papadopoulos, E.; Sarkar, S. 1996. On the dynamic modeling of an articulated electrohydraulic forestry machine, in Proceedings of the 1996 AIAA Forum on Advanced Developments in Space Robotics, August 1–2, 1996, Madison, WI, 1–10.
   Google Scholar
• Sirén, M.; Tanttu, V. 2001. Pienet hakkuukoneet ja korjuri rämemännikön talvikorjuussa, Metsätieteen Aikakauskirja 4: 599–614 ( in Finnish).
   Google Scholar
• Rakut'ko, S. A. 2008. Jenergoyomkost’ kak kriterij optimizacii tehnologicheskih processov, Mechanizaciya i Jelektrifikaciya Sel'skogo Hozyajstva 12: 54–56 ( in Russian).
   Google Scholar
• Ryskin, Yu., E.; Provotorov, Yu. I. 1971. Jeksperimental'noe opredelenie uprugih i dempfiruyushhih harakteristik krupnogabaritnyh shin nizkogo davleniya, Trudy CNIIMJE 121: 93–97 ( in Russian).
   Google Scholar
• Sadovskij, B. D.; Prokof'ev, V. N.; Kutuzov, V. K. et al. 1972. Dinamika Gidroprivoda. Mashinostroenie, Moskva. 292 s. (in Russian).
   Google Scholar
• Sen'kin, V. A. 2006. Obosnovanie Parametrov Oborudovaniya mnogooperacionnyh Mashin pri Sortimentnoj Zagotovke Drevisiny. Avtoreferat dissertacii na soiskanie uchyonoj stepeni kandidata tehnicheskih nauk. Sankt-Peterburg. 20 s. (in Russian).
   Google Scholar
• Snopok, D. N. 2008. Nagruzhennost’ Silovoj Ustanovki Valochno-Suchkorezno-Raskryazhevochnyh Mashin v Processe Ochistki Derev'ev ot Such'ev. Dissertaciya na soiskanie uchyonoj stepeni kandidata tehnicheskih nauk. Uchta. 123 s. (in Russian).
   Google Scholar
• Spinelli, R.; Visser, R. 2008. Analyzing and estimating delays in harvester operations, International Journal of Forest Engineering 19(1): 36–41.
   Google Scholar
• Teterina, M. A. 2009. Obosnovanie Parametrov Obrabatyvayushhe-Transportnoj Sistemy ‘Harvester–Forvarder’ (na Primere Predpriyatij Permskogo Kraya). Avtoreferat dissertacii na soiskanie uchyonoj stepeni kandidata tehnicheskih nauk. Moskva. 24 s. (in Russian).
   Google Scholar
• Titov, A. V.; Presnyakov, L. A.; Zvekov, A. T.; Latyshev, S. M. 2008. Ramy Transportno-Tehnologicheskih Agregatov. MADI (GTU), Moskva. 72 s. (in Russian).
   Google Scholar
• Wang, J.; Greene, W. D. 1999. An interactive simulation system for modeling stands, harvests, and machines, Journal of Forest Engineering 10(1): 81–99.
   Google Scholar
• Widéen, A.; Kutlu, A.; Abrahamsson, J.; Sosa, M. 2011. Forwarder Frame Technical Report: 2011 Articulated Frame. School of Industrial Engineering and Management. KTH Royal Institute of Technology. 69 p. Available from Internet: http://www.kth.se/polopoly_fs/1.183103!/Menu/general/column-content/attachment/Frame_Report2011.pdf
   Google Scholar
• Yacenko, N. N. 1978. Pogloshhajushhaya i Sglazhivajushhaya Sposobnost’ Shin. Mashinostroenie, Moskva. 132 s. (in Russian).
   Google Scholar
• Zhukov, A. V.; Provotorov, Yu., I.; Skotnikov, V. A. et al. 1989. Meliorativnye, Stroitel'nye i Lesnye Traktory. Uradzhaj, Minsk. 355 s. (in Russian).
   Google Scholar