References
- Bednarek, Z., 1996. Determination of the temperature of uncovered steel constructions using numerical methods, Statyba [Civil Engineering] 4 (8) (1996), pp. 6–10.
- Bednarek, Z., Kaliszuk-Wietecka, A., and Wiśniewski, Т., 2002. Research on the influence of fire protection impregnation carried out by the vacuum -and-pressure method on wood dynamic strength, Building Review [Przegląd Budowlany] (in Polish) 10 (2002), pp. 12–14.
- Bednarek, Z., and Kaliszuk-Wietecka, A., 2004. Scientific research on the influence of fireproof wood preservation carried out by the vacuum-pressure method on strength of wood in normal and elevated temperatures, in Proceedings of the 8th International Conference “Modern Building Materials, Structures and Techniques”. Vilnius Vilnius. 2004. pp. 963–967.
- Bednarek, Z., and Ogrodnik, P., 2007. Testing steel-concrete bond in fire conditions, in Proceedings of the 9th International Conference “Modern Building Materials, Structures and Techniques”. Vilnius Vilnius. 2007. pp. 1152–1158.
- Dębowska, A., 2004. Problems of wood steel constructions in fire. Polytechnic Opole (in Polish); 2004.
- ENV 1995-1-2:2000, , "Eurocode 5: Design of timber structures". In: Part 1-2: General rules Structural fire design. Brussels.
- EN 1995-1-2:2004, , "Eurocode 5: Design of timber structures". In: Part 1-2: General-Structural fire design. Brussels.
- Frangi, A., and Fontana, M., 2003. Charring rates and temperature profiles of wood sections, Journal of Fire and Materials 27 (2) (2003), pp. 91–102. DOI: 10.1002/fam.819
- Gribniak, V., Bacinskas, D., and Kaklauskas, G., 2006. Numerical simulation strategy of reinforced concrete tunnel bearing members in fire, The Baltic Journal of Road and Bridge Engineering 1 (1) (2006), pp. 5–9.
- Jong, F., and Clancy, P., 2004. Compression properties of wood as functions of moisture, stress and temperature, Journal of Fire and Materials 28 (2–4) (2004), pp. 209–225. DOI: 10.1002/fam.859
- Holm, C., 1980. A survey of the goals and results of fire endurance investigations especially from the viewpoint of glued laminated structures, in Symposium in Tbilisi “Fire Resistance of Wood Structures”. Tbilisi. 1980. pp. 17–24.
- Huntierova, Z., 1995. Analysis of the burning behavior of wood and timber considering the use of fire protection layers. Munich: Graefelfing publishing house in German; 1995.
- Kordina, K., Meyer-Ottens, C., and Scheer, C., 1994. Handbook of wood fire safety. Munich: Ernst and Son in German; 1994.
- Krakovsky, A., and Kral, Š., 2004. The influence of thermo mechanical loading on behavior of spruce wood. Technical University in Zvolen (in Polish); 2004.
- Lache, M., 1992. A survey of the burning rate of solid wood and the fire resistance of wooden ceiling boards exposed to bending. Munich(in German); 1992.
- Lipinskas, D., and Mačiulaitis, R., 2005. Further opportunities for development of the method for fire origin prognosis, Journal of Civil Engineering and Management 11 (4) (2005), pp. 299–307.
- Šaučiuvėnas, G., and Griškevičius, M., 2009. The behavior or axial compression timber elements at fire, Statybinės konstrukcijos ir technologijos [Engineering Structures and Technologies] 1 (1) (2009), pp. 50–57. DOI: 10.3846/skt.2009.06
- Schaffer, E., 1997. State of structural timber fire endurance, Wood and Fiber 9 (2) (1997), pp. 145–170.
- Tran, H. C., and White, R. H., 1992. Burning rate of solid wood measured in a heat release rate colorimeter, Fire and Materials 16 (1992), pp. 197–206. DOI: 10.1002/fam.810160406