177
Views
2
CrossRef citations to date
0
Altmetric
Technical Paper

Lessons on Building Design from the 22 February 2011 Christchurch Earthquake

Pages 159-173 | Published online: 16 Nov 2015

References

  • American Society of Civil Engineers (ASCE), 2005, ASCE/SEI Standard 7–5: Minimum Design Loads for Buildings and other Structures, Reston, Va.
  • American Society of Civil Engineers (ASCE), 2011, ASCE/SEI Standard 7–0: Minimum Design Loads for Buildings and other Structures, second printing incorporating errata identified through 6 April 2011, Reston, Va.
  • Australian Building Codes Board, 2011, National Construction Code (NCC) 2011: Complete Series.
  • Baird, A., Palermo, A. & Pampanin, S. 2012, “Façade damage assessment of concrete buildings in the 2011 Christchurch earthquake”, Structural Concrete, Journal of the fip, Vol. 13, No. 1, pp. 3–13.
  • Beca Carter Hollings and Ferner Ltd (Beca), 2011, “Investigation into the Collapse of the Pyne Gould Corporation Building on 22nd February 2011”, prepared for Department of Building and Housing, 26 September, http://canterbury.royalcommission. govt.nz/Technical-Reports.
  • Bowman, J. R., Gibson, G. & Jones, T. 1990, “Aftershocks of the 1988 January 22 Tennant Creek, Australia intraplate earthquakes: evidence for a complex thrust-fault geometry”, Geophys. J. Int., Vol. 100, pp. 87–97.
  • Bradley, B. A. 2012, “Ground Motion and Seismicity Aspects of the 4 September and 22 February 2011 Christchurch Earthquakes”, Technical Report Prepared for the Canterbury Earthquakes Royal Commission, 13 January, Christchurch, New Zealand, http://canterbury.royalcommission.govt. nz/Technical-Reports.
  • Bruneau, M., Clifton, C., MacRae, G., Leon, R. & Furnell, B. 2011, “Steel Building Damage from the Christchurch Earthquake of Feb 22, 2011”, NZST, http://db.nzsee.org.nz:8080/web/chch_2011/structural.
  • Buchanan, A. H., Bull, D., Dhakal, R. P., MacRae, G. & Pampanin, S. 2011, “Base-Isolation and Damage-Resistant Technologies for Improved Seismic Performance of Buildings”, August, http://canterbury.royalcommission.govt.nz/Technical-Reports.
  • Bull, D. 2005, “Earthquake Engineering in Regions of Low-Moderate Seismicity”, Proc. of the 2005 Conference of the Australian Earthquake Engineering Society, Albury, New South Wales, Australia.
  • Captive Review, 2006, “Australia cat bond for Swiss Re”, 16 March, http://www.captivereview.com/news/105276/australia-cat-bond-for-swiss-re-.thtml.
  • Chouw, N., Hao, H. & Goldsworthy, H. 2011, “Some Observations of Damage in the 22nd February Christchurch Earthquake”, http://www.aees.org. au/News/110222_CHCH/Christchurch_report_ May_2011.pdf.
  • Department of Building and Housing, 2012, “Structural Performance of Christchurch CBD Buildings in the 22 February 2011 Aftershock”, Expert Panel Report to the New Zealand Royal Commission of Inquiry into Building Failure Caused by the Canterbury Earthquakes, http://canterbury.royalcommission. govt.nz.
  • Galloway, B. D., Hare, H. J. & Bull, D. K. 2011, “Performance of multi-storey reinforced concrete buildings in the Darfield Earthquake”, Proceedings of the Ninth Pacific Conference in Earthquake Engineering, 14–6 April, Auckland, New Zealand.
  • GNS, 2011, “The Canterbury Earthquake Sequence and Implications for Seismic Design Levels”, GNS Seismic Consulting Report, 14 October, http://canterbury.royalcommission.govt.nz/Technical-Reports.
  • Goldsworthy, H. & Hao, H. 2011, “AEES Reconnaissance Mission to New Zealand: Part 1 (Preliminary Report)”, www.aees.org.au/News/110222_CHCH/Mission-Helen.html.
  • Henry, R. & Ingham, J. 2011, “Behaviour of tilt-up precast concrete buildings during the 2010/2011 Christchurch earthquakes”, Structural Concrete, Journal of the fip, Vol. 12, No. 4, pp. 234–240.
  • Ingham, J. M. & Griffith, M. C. 2011, “The Performance of Unreinforced Masonry Buildings in the 2010/2011 Canterbury Earthquake Swarm”, Technical Report Prepared for the Canterbury Earthquakes Royal Commission, August, http://canterbury. royalcommission.govt.nz/Technical-Reports.
  • Ingham, J., Moon, L. & Griffith, M.C. 2011, “Performance of Masonry Buildings in the 2010/2011 Canterbury Earthquake Swarm and Implications for Australian Cities”, Proc. of the Australian Earthquake Engineering Society Conf., 18–0 November, Novotel Barossa Valley Resort, South Australia.
  • IPENZ, 2011, “Fact Sheets”, www.aees.org.au/News/110222_CHCH/110311_ChChFactSheets.pdf.
  • Kalkan, E. 2011, “Preface”, Seismological Letters, special issue on the Christchurch earthquake, November/December 2011, Vol. 82, pp. 765–964.
  • Kam, W. Y. 2011a, “Day 02 Field Report from the Christchurch 22 Feb 2011 6.3Mw Earthquake: Structural Perspectives”, http://db.nzsee.org. nz:8080/web/chch_2011/structural.
  • Kam, W. Y. 2011b, “Day 03 Field Report from the Christchurch 22 Feb 2011 6.3Mw Earthquake: Critically Damaged Multi-Storey RC Buildings”, http://db.nzsee.org.nz:8080/web/chch_2011/structural.
  • Kam, W. Y. & Pampanin, S. 2011b, “The Seismic Performance of RC Buildings in the 22 February 2011 Christchurch Earthquake”, Structural Concrete, Journal of the fip, Vol. 12, No. 4, pp. 223–233.
  • Kam, W. Y., Akzugel, U. & Pampanin, S. 2011a, “4 weeks on: Preliminary Reconnaissance Report for the Christchurch 22 Feb 2011 6.3Mw Earthquake”, http://db.nzsee.org.nz:8080/web/chch_2011/structural.
  • Michael-Leiba, M. O. 1989, “Macroseismic effects, locations and magnitudes of some early Tasmanian earthquakes”, BMR Journal, Vol. 11, pp. 89–99.
  • Nordensen, G. J. P. & Bell, G. R. 2000, “Seismic Design Requirements for Regions of Moderate Seismicity”, Proceedings of the 12 th World Conference in Earthquake Engineering, Auckland, New Zealand, Paper No. 825.
  • NZSEE, 2011a, Special Edition Bulletin on the Observations of the February 2011 Christchurch Earthquake Sequences, Vol. 44, No. 4, December.
  • NZSEE, 2011b, “New Zealand Society for Earthquake Engineering Inc.”, http://nzsee.org.nz.
  • Pampanin, S., Kam, W. Y., Tasigedik, A .S., Quintera Gallo, P. & Akguzal, U. 2011, “Considerations on the Seismic Performance of pre 1970s RC buildings in the ChCh CBD during the 4th Sept 2010 Canterbury Earthquake: Was that really a big one?”, Proceedings of the 9 th Pacific Conference on Earthquake Engineering, 14–6 April, Auckland, New Zealand.
  • Priestley, M. J. N., Calvi, M. & Kowalsky, P. 2007, Displacement-Based Seismic Design of Structures, IUSS Press, Pavia, Italy.
  • Smyrou, E., Tasiopoulou, P., Bal, I. E., Gazetas, G. & Vintzileou, E. 2011, “Structural and Geotechnical Aspects of the Christchurch (2011) and Darfield (2010) Earthquakes in New Zealand”, 7th National Conference on Earthquake Engineering, 30 May to 3 June, Istanbul, Turkey.
  • Standards Association of New Zealand, 1976, NZS4203: (1976) Code of Practice for General Structural Design and Design Loadings for Buildings, Wellington.
  • Standards Association of New Zealand, 2004, NZS1170.5: (2004) Structural Design Actions Part 5: Earthquake Actions — New Zealand, Wellington.
  • Standards Australia, 1998, AS4100-19–8: Steel Structures.
  • Standards Australia, 2007, AS1170.4-20–7: Structural design actions, Part 4: Earthquake actions in Australia.
  • Standards Australia, 2009, AS3600-20–9: Concrete Structures.
  • Structural Engineering Society (SeSoc), 2011, “Preliminary Observations from CHCH Earthquakes”, New Zealand, http://canterbury. royalcommission.govt.nz/Technical-Reports.
  • Tonkin and Taylor, 2011, “Darfield Earthquake 4 Sept. 2010 Geotechnical Land Damage Assessment and Reinstatement Report — Stage 1 Report”, Earthquake Commission, www.tonkin.co.nz/canterbury-land-information/docs/T&T-Stage%201%20Report.pdf.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.