References
- Altermatt, P. P., Heiser, G., Aberle, A. G., Wang, A., Zhao, J., Robinson, S.J., Bowden, S., Green, M. A. 1996, “Spatially resolved analysis and minimization of resistive losses in high-efficiency Si solar cells”, Progress in Photovoltaics: Research and Applications, Vol. 4, No. 6, pp. 399–414.
- Brecl, K., Fischer, D., Smole, F. & Topic, M. 2006, “2-D model for simulation of electrical losses in an amorphous silicon thin-film module”, 21 st European Photovoltaic Solar Energy Conference, 4-8 September, Dresden, Germany, pp. 1662–1665.
- Burgers, A. R. 1999, “How to design optimal metallization patterns for solar cells”, Progress in Photovoltaics: Research and Applications, Vol. 7, No. 6, pp. 457–461.
- Burgers, A. R. & Eikelboom, J. A. 1997, “Optimizing metallization patterns for yearly yield”, Conference Record of the IEEE Photovoltaic Specialists Conference, pp. 219–222.
- Cheknane, A., Benyoucef, B., Charles, J.-P., Zerdoum, R. & Trari, M. 2005, “Minimization of the effect of the collecting grid in a solar cell based silicon”, Solar Energy Materials & Solar Cells, Vol. 87, pp. 557-565.
- Daniel, K. 2010, “Modeling, geometric optimization and isolation of the edge region in silicon solar cells”, Solar Energy Materials & Solar Cells, Vol. 94, pp. 830–835.
- Galina, B. & Algors, C. 2005, “A 3-D model for concentrator solar cell based on distributed circuit units”, IEEE Transactions on Electron Devices, Vol. 52, No. 12, pp. 2552–2558.
- Galina, B., Algors, C. & Rey-Stolle, I. 2006, “Comparison of 1D and 3D analysis of front contact influence on GaAs concentration solar cell”, IEEE Solar Energy Material and Solar Cell, Vol. 90, pp. 2589–2604.
- Ganopadhyay, U., Saha, H., Dutta, S. K., Kyunghae, K., Chakrabarty, K. & Yi, J. 2002, “Front grid design for plated contact solar cells”, Conference Record of the IEEE Photovoltaic Specialists Conference, pp. 399–402.
- Hamaker, H. C. 1985, “Computer modelling study of the effects of inhomogeneous doping and/or composition in GaAs solar-cell devices”, Journal of Applied Physics, Vol. 58, No. 6, pp. 2344–2351.
- Pierret, R. F. 1996, Semiconductor Devices Fundamentals, 1st edition, Addison Wesley Publishing Company.
- Soga, T., Kato, T., Yang, M., Umeno, M. & Jimbo, T. 1995, “High efficiency AlGaAs/Si monolithic tandem solar cell grown by metalorganic chemical vapor deposition”, Vol. 78, No. 6, pp. 4196–4199.
- Van Eijk, P., Kerp, H., Albertsen, K., Pham, T., van den Donker, M. N. & Shaikh, A. 2008, “Optimized front silver metallization for high-Ohmic emitters”, 23 rd European Photovoltaic Solar Energy Conference, 1-5 September, Valencia, Spain, pp. 1805–1807.
- Yamaguchi, M., Takamoto, T., Araki, K. & Ekins-Daukes, N. 2005, “Multi-junction III-V solar cells: current status and future potential”, Solar Energy, Vol. 79, No. 1, pp. 78–85.
- Yastrebova, N. V. 2007, “High-efficiency multi-junction solar cells: Current status and future potential”, Centre for Research in Photonics, University of Ottawa, April.