Mathematical approach for optimal machining fixture layout and clamping forces

References

• Amaral, N., Rencis, J. R. & Rong, Y. 2005, “Development of a finite element analysis tool for fixture design integrity verification and optimization”, International Journal of Advanced Manufacturing Technology, Vol. 25, pp. 409–419.
   Google Scholar
• Chen, W., Chen, H., Ni, L. & Xue, J. 2008, “Deformation control through fixture layout design and clamping force optimization”, International Journal of Advanced Manufacturing Technology, Vol. 38, pp. 860–867.
   Google Scholar
• De Meter, E. C., Xie, W., Choudhri, S., Vallapuzha, S. & Trethewey, M. W. 2001, “A model to predict minimum required clamp pre-loads in light of fixture-workpiece compliance”, International Journal of Machine Tools & Manufacture, Vol. 41, pp. 1031–1054.
   Google Scholar
• Haiyen, D. & Melkote, S. N. 2006, “Determination of minimum clamping forces for dynamically stable fixturing”, International Journal of Machine Tools & Manufacture, Vol. 46, pp. 847–857.
   Google Scholar
• Jiang, Z. L. & Meng, X. X. 2010, “Analysis of the Workpiece Elastic Deformation Holding in Fixture with High Definition Metrology”, Advanced Materials Research, Vol. 102-104, pp. 12–16.
   Google Scholar
• Jiang, Z. L., Liu, Y. M. & Shan, Y. X. 2010, “Zonal Compensation for Work-Piece Elastic Deformation through Fixture Layout Optimization”, Applied Mechanics and Materials, Vol. 26-28, pp. 854–857.
   Google Scholar
• Kashyap, S. & DeVries, W. R. 1999, “Finite element analysis and optimization in fixture design”, Structural Optimization, Vol. 18, pp. 193–201.
   Google Scholar
• Kaya, N. 2006, “Machining fixture locating and clamping position optimization using genetic algorithms”, Computers in Industry, Vol. 57, pp. 112–120.
   Google Scholar
• Kulankara, K., Satyanarayana, S. & Melkote, S. N. 2002, “Iterative Fixture Layout and Clamping Force Optimization Using the Genetic Algorithm”, ASME Journal of Manufacturing Science and Engineering, Vol. 124, pp. 119–125.
   Google Scholar
• Li, B. & Melkote, S. N. 1999, “Improved workpiece location accuracy through fixture layout Optimization”, International Journal of Machine Tools and Manufacture, Vol. 39, pp. 871–883.
   Google Scholar
• Li, B. & Melkote, S. N. 2001, “Fixture Clamping Force Optimisation and its Impact on Workpiece Location Accuracy”, International Journal of Advanced Manufacturing Technology, Vol. 17, pp. 104–113.
   Google Scholar
• Liao, Y. G. & Hu, S. J. 2001, “An Integrated model of a Fixture – Workpiece System for Surface Quality Prediction”, International Journal of Advanced Manufacturing Technology, Vol. 17, pp. 810–818.
   Google Scholar
• Liu, S., Zheng, L., Zhang, Z. H. & Wen, D. H. 2005, “Optimal fixture design in peripheral milling of thin-walled workpiece”, International Journal of Advanced Manufacturing Technology, Vol. 28, pp. 653–658.
   Google Scholar
• Liu, S., Zheng, L., Zhang, Z. H., Li, Z. & Liu, D. 2007, “Optimization of the number and positions of fixture locators in the peripheral milling of a low-rigidity workpiece”, International Journal of Advanced Manufacturing Technology, Vol. 33, pp. 668–676.
   Google Scholar
• Marin, R. A. & Ferreira, P. M. 2002, “Optimal Placement of Fixture Clamps: Minimizing the Maximum Clamping Forces”, Journal of Manufacturing Science and Engineering, Vol. 124, pp. 686–694.
   Google Scholar
• Menassa, R. J. & DeVries, W. R. 1991, “Optimization Methods Applied to Selecting Support Positions in Fixture Design”, ASME Journal of Engineering for Industry, Vol. 113, pp. 412–418.
   Google Scholar
• Padmanaban, K. P. & Prabhaharan, G. 2008, “Dynamic analysis on optimal placement of fixturing elements using evolutionary techniques”, International Journal of Production Research, Vol. 46, No. 15, pp. 4177–4214.
   Google Scholar
• Prabhakaran, G., Padmanaban, K. P. & Krishnakumar, R. 2007, “Machining fixture layout optimization using FEM and evolutionary techniques”, International Journal of Advanced Manufacturing Technology, Vol. 32, pp. 1090–1103.
   Google Scholar
• Padmanaban, K. P., Arulshri, K. P. & Prabhakaran, G. 2009, “Machining fixture layout design using ant colony algorithm based continuous optimization method”, International Journal of Advanced Manufacturing Technology, Vol. 45, pp. 922–934.
   Google Scholar
• Qin, G. H., Zhang, W. H. & Wan, M. 2006, “A mathematical approach to analysis and optimal design of a fixture locating scheme”, International Journal of Advanced Manufacturing Technology, Vol. 29, pp. 349–359.
   Google Scholar
• Raghu, A. & Melkote, S. N. 2004, “Analysis of the effects of fixture clamping sequence on part location errors”, International Journal of Machine Tools & Manufacture, Vol. 44, pp. 373–382.
   Google Scholar
• Sánchez, H. T., Estrems, M. & Faur, F. 2006, “Analysis and compensation of positional and deformation errorsusing integrated fixturing analysis in flexible machining parts”, International Journal of Advanced Manufacturing Technology, Vol. 29, pp. 239–252.
   Google Scholar
• Sánchez, H. T., Estrems, M. & Faura, F. 2008, “Determination of key workpiece product characteristics in a machining fixture using uncertainty analysis and loss cost function implementation”, International Journal of Advanced Manufacturing Technology, Vol. 41, No. 5-6, pp. 452–460.
   Google Scholar
• Siva Kumar, K. & Paulraj, G. 2011, “Genetic algorithm based deformation control and clamping force optimisation of workpiece fixture system”, International Journal of Production Research, Vol. 49, pp. 1903–1935.
   Google Scholar
• Song, H. & Rong, Y. 2005, “Locating completeness evaluation and revision in fixture plan”, Robotics and Computer-Integrated Manufacturing, Vol. 21, pp. 368–378.
   Google Scholar
• Sun, Y. W., Zhang, C. T. & Guo, Q. 2011, “Optimization Research on Workpiece Clamping Deformation Using Genetic Algorithm and Finite Element Method”, Advanced Materials Research, Vol. 189-193, pp. 2153–2160.
   Google Scholar
• Tan, E. Y. T., Kumar, A. S., Fuh, J. Y. H. & Nee, A. Y. C. 2004, “Modeling, analysis, and verification of optimal fixturing design”, IEEE Transactions on Automation Science and Engineering, Vol. 1, pp. 121–132.
   Google Scholar
• Vishnupriyan, S., Majumder, M. C. & Ramachandran, K. P. 2010, “Optimization of machining fixture layout for tolerance requirements under the influence of locating errors”, International Journal of Engineering, Science and Technology, Vol. 2, No. 1, pp. 152–162.
   Google Scholar