References
- Alcoa, 2007, “Understanding extruded aluminium alloys – alloy 6082”, 10 December, Cressona, PA, USA, www.alcoa.com/adip/catalog/pdf/extruded-alloy-6082.pdf.
- ASTM, 2006, “ASTM-E08-04 Standard test method for tension testing of metallic materials”, Annual book of ASTM standards, Section 3, Vol. 03.01 Metals test methods and analytical procedure, p. 90.
- Badarinarayan, H., Shi, Y., Li, X. & Okamoto, K. 2009, “Effect of tool geometry on hook formation and static strength of friction stir spot welded aluminum 5754-O sheets”, International Journal of Machine Tools & Manufacture, Vol. 49, pp. 814–823.
- Belavendran, N. 1995, Quality by Design, Taguchi techniques for industrial experimentation, Prentice Hall.
- Beraha, E. & Shpigler, B. 1977, Color Metallography, American Society for Metals.
- Box, G. E. P., Hunter, W. H. & Hunter, J. S. 1978, Statistics for experiment, John Wiley Publications, New York.
- Elangovan, K. & Balasubramanian, V. 2008a, “Influences of tool pin profile and welding speed on the formation of friction stir processing zone in AA2219 aluminium alloy”, Journals of Materials Processing Technology, Vol. 200, pp. 163–175.
- Elangovan, K. & Balasubramanian, V. 2008b, “Influences of tool pin profile and shoulder diameter on the formation of friction stir processing zone in AA6061 aluminium alloy”, Materials and Design, Vol. 29, pp. 362–373.
- Elangovan, K. & Balasubramanian, V. 2009, “Predicting tensile strength of friction stir welded AA6061 aluminum alloy joints by a mathematical model”, Journals of Materials and Design, Vol. 30, pp. 188–193.
- Ericsson, M. & Sandstorm, R. 2003, “Influence of welding speed on the fatigue of friction stir welds, and comparison with MIG and TIG”, International Journal of Fatigue, Vol. 25, pp. 1379–1387.
- Flores, O. V., Kennedy, C., Murr, L. E., Brown, D., Pappu, S., Nowak, B. M. & McClure, J. C. 1998, “Microstructural issues in a friction stir welded aluminium alloy”, Scripta Materialia, Vol. 38, No. 5, pp. 703–708.
- Fratini, L., Buffa, G. & Shivapuri, R. 2009, “Influence of material characteristics on plastomechanics of the FSW process for T-joints”, Materials and Design, Vol. 30, pp. 2435–2445.
- Gopi, S. & Manonmani, K. 2012, “Influence of shoulder profile and shoulder penetration on joint strength; of friction stir welded AA6082 in conventional milling machine”, European Journal of Scientific Research, Vol. 73, No. 1, pp. 20–32.
- Leal, R. M. & Loureiro, A. 2006, “Microstructure and mechanical properties of friction stir welds in aluminium alloys 2024-T3, 5083-Oand 6063-T6”, Material Science Forum, Vol. 514-6, pp. 697–701.
- Lee, W. B. 2004, “Mechanical properties related to microstructural variation of 6061 aluminium alloy joints by friction stir welding”, Materials Transactions, Vol. 45, No. 5, pp. 1700–1705.
- Liu, G., Murr, L. E., Niou, C. S., McClure, J. C. & Vega, E. R. 1997, “Microstructural aspects of the friction stir welding of 6061-T6 aluminium”, Scripta Materialia, Vol. 37, No. 3, pp. 355–361.
- Merzoug, M., Mazari, M. & Barrahal, L. 2010, “Parametric studies of the process of friction spot stir welding of aluminium 6060-T5 alloys”, Materials and Design, Vol. 31, pp. 3023–3028.
- Milton, T. & Mynors, D. J. 2006, “Utilisation of engineering workshop equipment for friction stir welding”, Journals of Materials Processing Technology, Vol.177, pp. 336–339.
- MINITAB, n.d., Statistical software, Release 15.
- Montgomery, D. C. 2001, Design and Analysis of Experiments, 5th edition, John Wiley & Sons, New York.
- Moreira, P. M. G. P. & Santos, T. 2009, “Mechanical and Metallurgical Characterization of friction stir welding joints of AA6061-T6 with AA6082-T6”, Materials and Design, Vol. 30, pp. 180–187.
- Mrowka-Nowotnik, G., Sieniawski, J. & Wierzbinska, M. 2007, “Intermetallic phase particles in 6082 aluminium alloy”, Archives of Materials Science and Engineering, Vol. 28, No. 2, pp. 69–76.
- Ouyang, J. H. & Kovacevic, R. 2002, “Material flow during friction stir welding (FSW) of the same and dissimilar aluminum alloys”, J. Mater. Eng. Perform., Vol. 11, No. 1, pp. 51–63.
- Padmanaban, G. & Balasubramanian, V. 2009, “Selection of FSW tool pin profile, shoulder diameter and material for joining AZ31B magnesium alloy-An experimental approach”, Materials and Design, Vol. 30, pp. 2647–2656.
- Peel, M., Steuwer, A., Preuss, M. & Withers, P. J. 2003, “Microstructure, mechanical properties and residual stresses as a function of welding speed in aluminium AA5083 friction stir welds”, Acta Materialia, Vol. 53, pp. 4791–801.
- Rajakumar, S., Muralidharan, C. & Balasubramanian, V. 2010, “Influence of friction stir welding process and tool parameters on strength properties of AA7075-T6 aluminium alloy joints”, Materials and Design, Vol. 16, pp. 1–15.
- Rhodes, C. G., Mahoney, M. W., Bingel, W. H., Spurling, R. A. & Bampton, C. C. 1997, “Effects of friction stir welding on microstructure of 7075 aluminium”, Scripta Materialia, Vol. 36, pp. 69–75.
- Rose, P. J. 2005, Taguchi technique for quality engineering, Prentice Hall.
- Scialpi, A., de Filippis, L. A. C. & Cavaliere, P. 2007, “Influence of shoulder geometry on microstructure and mechanical properties of friction stir welded 6082 aluminium alloy”, Materials and Design, Vol. 28, pp. 1124–1129.
- Shigley, J. E. & Mitchell, L. D. 1984, Mechanical Engineering Design, McGraw-Hill Int. Book Company.
- Su, J. Q., Nelson, T. W., Mishra, R. & Mahoney, M. 2003, “Microstructural investigation of friction stir welded 7050-T651 aluminium”, Acta Materialia, Vol. 51, pp. 713–729.
- Sutton, M. A., Yang, B., Reynolds, A. P. & Taylor, R. 2002, “Microstructural studies of friction stir welds in 2024-T3 aluminium”, Materials Science and Engineering A, Vol. 323, No. 1-2, pp. 160–166.
- Thomas, W. M., Nicholas, E. D., Needham, J. C., Murch, M. G., Templesmith, P. & Dawes, C. J. 1991, “Friction stir butt welding”, International patent Application No. PCT/GB92/02203.
- Vijay, S. J. & Murugan, N. 2010, “Influnce of tool pin profile on the metallurgical and mechanical properties of friction stir welded Al-10 Wt% TiB2 metal matrix composite”, Materials and Design, Vol. 31, pp. 3585–3589.
- Zimmer, S., Langlois, L. & Laye, J. 2010, “Experimental investigation of the influence of the FSW plunge processing parameters on the maximum generated force and torque”, Int. Journal of Advanced Manufacturing Technology, Vol. 47, pp. 201–215.