Supplemental material
Reprints and Corporate Permissions
Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?
To request a reprint or corporate permissions for this article, please click on the relevant link below:
Academic Permissions
Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?
Obtain permissions instantly via Rightslink by clicking on the button below:
If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.
Related Research Data
Flow of melt and glass forms of metallic alloys
Source:
Elsevier BV
Glass Forming Ability Criterion
Source:
Trans Tech Publications, Ltd.
Effects of partitioned enthalpy of mixing on glass-forming ability
Source:
AIP Publishing
Relook on fitting of viscosity with undercooling of glassy liquids
Source:
Springer Science and Business Media LLC
Recent progress in criterions for glass forming ability
Source:
Elsevier BV
Can glass stability parameters infer glass forming ability
Source:
Elsevier BV
Time Scales for Viscous Flow, Atomic Transport, and Crystallization in the Liquid and Supercooled Liquid States of Zr 41.2 Ti 13.8 Cu 12.5 Ni 10.0 Be 22.5
Source:
American Physical Society (APS)
An extended criterion for estimation of glass-forming ability of metals
Source:
Springer Science and Business Media LLC
Thermodynamic and Topological Modeling and Synthesis of Cu-Zr-Ti-Ni–Based Bulk Metallic Glasses by Mechanical Alloying
Source:
Springer Science and Business Media LLC
Efficient Local Packing in Metallic Glasses
Source:
Elsevier BV
A new criterion for evaluating the glass-forming ability of bulk metallic glasses
Source:
Elsevier BV
New thermodynamic parameter describing glass forming ability of bulk metallic glasses
Source:
Informa UK Limited
New glass forming ability criterion derived from cooling consideration
Source:
Elsevier BV
Characteristic free volumes of bulk metallic glasses: Measurement and their correlation with glass-forming ability
Source:
AIP Publishing
Optimization of bulk metallic glass forming compositions in Zr–Cu–Al system by thermodynamic modeling
Source:
Elsevier BV
Electronic structure of primary solid solutions in metals
Source:
Informa UK Limited
Viscous flow of the Pd43Ni10Cu27P20 bulk metallic glass-forming liquid
Source:
AIP Publishing
Glass transition in metallic glasses: A microscopic model of topological fluctuations in the bonding network
Source:
American Physical Society (APS)
Glass-forming tendency of bulk La–Al–Ni–Cu–(Co) metallic glass-forming liquids
Source:
AIP Publishing
The effect of nanocrystallization and free volume on the room temperature plasticity of Zr-based bulk metallic glasses
Source:
Elsevier BV
A thermodynamic criterion for predicting glass-forming ability in binary metallic glasses
Source:
Elsevier BV
Origin of the Vogel-Fulcher-Tammann law in glass-forming materials : the α-β bifurcation
Source:
Elsevier BV
Interrelation between the parameters of equations of viscous flow and chemical composition of glassforming melts
Source:
Elsevier BV
Data classification with the Vogel–Fulcher–Tammann–Hesse viscosity equation using correspondence analysis
Source:
Elsevier BV
Diffusion and viscosity in molten Pd40Ni40P20 and Pd40Cu30Ni10P20 alloys
Source:
Elsevier BV
On the approximation of the free energy change on crystallization
Source:
Elsevier BV
Identify the best glass forming ability criterion
Source:
Elsevier BV
On the new criterion to assess the glass-forming ability of metallic alloys
Source:
Elsevier BV
Atomic level stresses
Source:
Elsevier BV
Liquid-glass transition, a free-volume approach
Source:
American Physical Society (APS)
Correlation between fragility and glass-forming ability of metallic alloys
Source:
American Physical Society (APS)
A new criterion for predicting glass forming ability of bulk metallic glasses and some critical discussions
Source:
Chinese Materials Research Society. Production and hosting by Elsevier B.V.
Thermodynamics and kinetics of the Mg65Cu25Y10 bulk metallic glass forming liquid
Source:
American Institute of Physics
Thermodynamics and fragility of glass-forming alloys
Source:
Elsevier BV
More than entropy in high-entropy alloys: Forming solid solutions or amorphous phase
Source:
Elsevier BV
Calculations of Mixing Enthalpy and Mismatch Entropy for Ternary Amorphous Alloys.
Source:
Japan Institute of Metals
Computational Platform for Manufacturing Bulk Metallic Glasses Based on GFA Parameters
Source:
Springer Science and Business Media LLC
Viscous flow of the Cu47Ti34Zr11Ni8 glass forming alloy
Source:
AIP Publishing
On the conditions for the synthesis of bulk metallic glasses by mechanical alloying
Source:
Elsevier BV
The effect of Zr addition in glass forming ability of Ni–Nb alloy system
Source:
Elsevier BV
Deformation and flow in bulk metallic glasses and deeply undercooled glass forming liquids—a self consistent dynamic free volume model
Source:
Elsevier BV
Development of a Thermodynamic Criterion to Predict the Alloy Compositions for Amorphous and Nanocrystalline Phase Formation during Mechanical Alloying
Source:
Trans Tech Publications, Ltd.
An empirical criterion for predicting the glass-forming ability of amorphous alloys based on electrical transport properties
Source:
Elsevier BV
Calculations of dominant factors of glass-forming ability for metallic glasses from viscosity
Source:
Elsevier BV
Viscous flow in simple organic liquids
Source:
American Chemical Society (ACS)
Evidence of a Glass-Liquid Transition in a Gold-Germanium-Silicon Alloy
Source:
AIP Publishing
A method for evaluating viscosities of metallic glasses from the rates of thermal transformations
Source:
Elsevier BV
Miedema model based methodology to predict amorphous-forming-composition range in binary and ternary systems
Source:
Elsevier BV
Viscosity measurements of Zr55Cu30Al10Ni5 supercooled liquid alloys by using penetration viscometer under high-speed heating conditions
Source:
Elsevier BV
A new criterion for evaluating the glass-forming ability of bulk glass forming alloys
Source:
Elsevier BV
Recent development and application products of bulk glassy alloys
Source:
Elsevier BV
Newtonian viscosity of supercooled liquid in a Pd40Ni40P20 metallic glass
Source:
AIP Publishing
Viscosity-related properties of Mg65Cu25Y10 bulk metallic glass determined by uniaxial tension in the supercooled liquid region
Source:
Elsevier BV
Dynamic fragility and reduced glass transition temperature as a pair of parameters for estimating glass forming ability
Source:
Elsevier BV
Volume effects upon alloying of two transition metals
Source:
Elsevier BV
Binary Ni-Nb bulk metallic glasses
Source:
AIP Publishing
A new glass-forming ability criterion for bulk metallic glasses
Source:
Elsevier BV
Strategies for developing bulk materials nanotechnology (BMN) into industrial products
Source:
Informa UK Limited
Evaluation of the parameters related to glass-forming ability of bulk metallic glasses
Source:
Elsevier BV
Evaluation of glass forming ability in binary and ternary metallic alloy systems – an application of thermodynamic phase diagram calculations
Source:
Informa UK Limited
Solid state amorphization in binary Ti-Ni, Ti-Cu and ternary Ti-Ni-Cu system by mechanical alloying
Source:
Elsevier BV
The efficient cluster packing model : An atomic structural model for metallic glasses
Source:
Elsevier BV
Formation of glasses from liquids and biopolymers.
Source:
American Association for the Advancement of Science (AAAS)
Cohesion in alloys - fundamentals of a semi-empirical model
Source:
Elsevier BV
Glass Forming Ability of Metallic Glasses Evaluated by a New Criterion
Source:
IOP Publishing
Formation of Crystal Nuclei in Liquid Metals
Source:
AIP Publishing
Liquid structure : Is it directly correlative to glass-forming ability?
Source:
Elsevier BV
Evaluation of glass-forming tendency by means of DTA
Source:
Springer Science and Business Media LLC
Quantitative evaluation of critical cooling rate for metallic glasses
Source:
Elsevier BV
High-Entropy Alloys: Basic Concepts
Source:
Elsevier
A new criterion for the glass-forming ability of liquids
Source:
Elsevier BV
A Thermodynamic Approach to assess glass-forming Ability of Bulk Metallic Glasses
Source:
Elsevier BV
On the parameters to assess the glass forming ability of liquids
Source:
Elsevier BV
Estimation of the critical glass transition rate and the inorganic glass thickness
Source:
Pleiades Publishing Ltd
Predicting alloy compositions of bulk metallic glasses with high glass-forming ability
Source:
Elsevier BV
Relationship between glass forming ability and thermal parameters of Zr based bulk metallic glasses
Source:
Informa UK Limited
Distortion of a Crystal by Point Imperfections
Source:
AIP Publishing
Generalized Stokes-Einstein equation for spherical particle suspensions
Source:
American Physical Society (APS)
Viscosity and specific volume of bulk metallic glass-forming alloys and their correlation with glass forming ability
Source:
Elsevier BV
Controlling the core-to-core distance of vortex pairs in exchange-biased iron elliptical nanoelements
Source:
AIP Publishing LLC
Correlation between maximum crystal growth rate and glass transition temperature of silicate glasses
Source:
Elsevier BV
On the heat of formation of solid alloys
Source:
Elsevier BV
Kinetics of Phase Change. II Transformation‐Time Relations for Random Distribution of Nuclei
Source:
AIP Publishing
Supercooling investigation and critical cooling rate for glass formation in Pd–Cu–Ni–P alloy
Source:
Elsevier BV
Calculations of amorphous-forming composition range for ternary alloy systems and analyses of stabilization of amorphous phase and amorphous-forming ability
Source:
Japan Institute of Metals
Candidate Atomic Cluster Configurations in Metallic Glass Structures
Source:
Japan Institute of Metals
A new criterion for predicting the glass-forming ability of bulk metallic glasses
Source:
Elsevier BV
On the prediction of solid-liquid interfacial energy of glass forming liquids from homogeneous nucleation theory
Source:
Elsevier BV
Glass-forming ability of alloys
Source:
Elsevier BV
Prediction of Glass Forming Ability Using Thermodynamic Parameters
Source:
Springer Science and Business Media LLC
A new thermodynamic parameter GCE for identification of glass forming compositions
Source:
Elsevier BV
Under what conditions can a glass be formed
Source:
Informa UK Limited
New criteria of glass forming ability, thermal stability and characteristic temperatures for various bulk metallic glass systems
Source:
Elsevier BV
Linking provided by
