Advanced search
Publication Cover
Acta Odontologica Scandinavica Volume 69, 2011 - Issue 2
Journal homepage
1,047
Views
64
CrossRef citations to date
0
Altmetric
Original Article

Mechanical properties of injection-molded thermoplastic denture base resins

Ippei Hamanaka Division of Removable Prosthodontics, Fukuoka Dental College, Fukuoka, Japan
,
Yutaka Takahashi Division of Removable Prosthodontics, Fukuoka Dental College, Fukuoka, JapanCorrespondence[email protected]
&
Hiroshi Shimizu Division of Removable Prosthodontics, Fukuoka Dental College, Fukuoka, Japan
Pages 75-79 | Received 08 Apr 2010, Accepted 05 Jul 2010, Published online: 27 Sep 2010

Citations (64)

Keep up to date with the latest research on this topic with citation updates for this article.

Subscribe to citation updates

Read on this site (9)

Övül Kümbüloğlu, Bengisu Yildirim, Nadin Al-Haj Husain & Mutlu Özcan. (2019) Adhesion potential of relining materials to polyamide and PMMA-based denture base materials: effect of surface conditioning methods. Journal of Adhesion Science and Technology 33:17, pages 1939-1947.
Read now
Long G. Nguyen, Hilde M. Kopperud & Marit Øilo. (2017) Water sorption and solubility of polyamide denture base materials. Acta Biomaterialia Odontologica Scandinavica 3:1, pages 47-52.
Read now
Ippei Hamanaka, Misa Iwamoto, Lippo V. J. Lassila, Pekka K. Vallittu & Yutaka Takahashi. (2016) Wear resistance of injection-molded thermoplastic denture base resins. Acta Biomaterialia Odontologica Scandinavica 2:1, pages 31-37.
Read now
Ippei Hamanaka, Misa Iwamoto, Lippo VJ Lassila, Pekka K Vallittu, Hiroshi Shimizu & Yutaka Takahashi. (2016) The effect of cycling deflection on the injection-molded thermoplastic denture base resins. Acta Odontologica Scandinavica 74:1, pages 67-72.
Read now
Ippei Hamanaka, Misa Iwamoto, Lippo Lassila, Pekka Vallittu, Hiroshi Shimizu & Yutaka Takahashi. (2014) Influence of water sorption on mechanical properties of injection-molded thermoplastic denture base resins. Acta Odontologica Scandinavica 72:8, pages 859-865.
Read now
Ippei Hamanaka, Yutaka Takahashi & Hiroshi Shimizu. (2014) Properties of injection-molded thermoplastic polyester denture base resins. Acta Odontologica Scandinavica 72:2, pages 139-144.
Read now
Ismail Hakki Uzun, Abdulgani Tatar, Ahmet Hacimuftuoglu, Fatih Saruhan & Funda Bayindir. (2013) In vitro evaluation of long-term cytotoxic response of injection-molded polyamide and polymethyle metacrylate denture base materials on primary fibroblast cell culture. Acta Odontologica Scandinavica 71:5, pages 1267-1272.
Read now
Ippei Hamanaka, Hiroshi Shimizu & Yutaka Takahashi. (2013) Shear bond strength of an autopolymerizing repair resin to injection-molded thermoplastic denture base resins. Acta Odontologica Scandinavica 71:5, pages 1250-1254.
Read now
Yutaka Takahashi, Ippei Hamanaka & Hiroshi Shimizu. (2012) Effect of thermal shock on mechanical properties of injection-molded thermoplastic denture base resins. Acta Odontologica Scandinavica 70:4, pages 297-302.
Read now

Articles from other publishers (55)

Pierre Le Bars, Octave Nadile Bandiaky, Laurent Le Guéhennec, Roselyne Clouet & Alain Ayepa Kouadio. (2023) Different Polymers for the Base of Removable Dentures? Part I: A Narrative Review of Mechanical and Physical Properties. Polymers 15:17, pages 3495.
Crossref
Shankargouda Patil, Frank W. Licari, Shilpa Bhandi, Kamran H. Awan, Almir Badnjević, Valentina Belli, Gabriele Cervino & Giuseppe Minervini. (2023) The Cytotoxic Effect of Thermoplastic Denture Base Resins: A Systematic Review. Journal of Functional Biomaterials 14:8, pages 411.
Crossref
V. L. Bogdanov, A. Ya. Grigorenko, G. V. Sorochenko & N. N. Tormakhov. (2023) Influence of the Shape and Geometric Parameters of Clasps on the Strength and Holding Force of Removable Orthopedic Dentures. Journal of Mathematical Sciences 270:1, pages 205-213.
Crossref
Ahmed Abd El‐latif Zeidan, Ahmed Fadlallah Sherif, Yasser Baraka, Reem Abualsaud, Ramy Abdallah Abdelrahim, Mohammed M. Gad & Mohamed A. Helal. (2022) Evaluation of the Effect of Different Construction Techniques of CAD‐CAM Milled, 3D‐Printed, and Polyamide Denture Base Resins on Flexural Strength: An In Vitro Comparative Study. Journal of Prosthodontics 32:1, pages 77-82.
Crossref
Mona GIBREEL, Leila PEREA-LOWERY, Pekka K. VALLITTU, Sufyan GAROUSHI & Lippo LASSILA. (2022) Two-body wear and surface hardness of occlusal splint materials. Dental Materials Journal 41:6, pages 916-922.
Crossref
Chien-Tien Hsu, Shih-Chang Hsu, Shau-Ku Huang, Chon-Lin Lee & Yi-Shing Shieh. (2022) Air quality in a hospital dental department. Journal of Dental Sciences 17:3, pages 1350-1355.
Crossref
Mohammed M. Gad, Shaimaa M. Fouda, Reem Abualsaud, Faris A. Alshahrani, Ahmad M. Al‐Thobity, Soban Q. Khan, Sultan Akhtar, Ijlal Shahrukh Ateeq, Mohamed A. Helal & Fahad A. Al‐Harbi. (2021) Strength and Surface Properties of a 3D‐Printed Denture Base Polymer. Journal of Prosthodontics 31:5, pages 412-418.
Crossref
Mohammed A. Akl & Charles G. Stendahl. (2022) Removable Partial Denture Frameworks in the Age of Digital Dentistry: A Review of the Literature. Prosthesis 4:2, pages 184-201.
Crossref
Wen He, Rui Wang, Feiyu Guo, Jizhou Cao, Zhihao Guo, Han Qiang, Shuang Liang, Qunyan Pang & Bairen Wei. (2022) Preparation of Transparent Fast-Growing Poplar Veneers with a Superior Optical Performance, Excellent Mechanical Properties, and Thermal Insulation by Acetylation Modification Using a Green Catalyst. Polymers 14:2, pages 257.
Crossref
MohamedA Helal, Ahmed Fadl-Alah, YasserM Baraka, MohammedM Gad & Abdel-NaserM Emam. (2022) In-vitro comparative evaluation for the surface properties and impact strength of CAD/CAM milled, 3D printed, and polyamide denture base resins. Journal of International Society of Preventive and Community Dentistry 12:1, pages 126.
Crossref
Mona Gibreel, Leila Perea-Lowery, Pekka K. Vallittu & Lippo Lassila. (2021) Characterization of occlusal splint materials: CAD-CAM versus conventional resins. Journal of the Mechanical Behavior of Biomedical Materials 124, pages 104813.
Crossref
Jialin HAO, Natsuko MURAKAMI, Toshiki YAMAZAKI, Naohiko IWASAKI, Masaru YATABE, Hidekazu TAKAHASHI & Noriyuki WAKABAYASHI. (2021) Flexural and fatigue properties of polyester disk material for milled resin clasps. Dental Materials Journal 40:6, pages 1359-1364.
Crossref
Shorouq K Hamid, AlAnood Hamad AlDubayan, Lujain A Alghamdi, Sultan Akhtar, Soban Q Khan, Ijlal S Ateeq & Mohammed M Gad. (2021) Mechanical, Surface, and Optical Properties of PMMA Denture Base Material Modified with Azadirachta indica as an Antifungal Agent. The Journal of Contemporary Dental Practice 22:6, pages 655-664.
Crossref
Leila Perea-Lowery, Irene K. Minja, Lippo Lassila, Ravikumar Ramakrishnaiah & Pekka K. Vallittu. (2021) Assessment of CAD-CAM polymers for digitally fabricated complete dentures. The Journal of Prosthetic Dentistry 125:1, pages 175-181.
Crossref
Satoru Watanabe, Yoshiki Ishida, Daisuke Miura, Taira Miyasaka & Akikazu Shinya. (2020) Development of a Weight-Drop Impact Testing Method for Dental Applications. Polymers 12:12, pages 2803.
Crossref
Vladimir Prpić, Zdravko Schauperl, Amir Ćatić, Nikša Dulčić & Samir Čimić. (2020) Comparison of Mechanical Properties of 3D‐Printed, CAD/CAM, and Conventional Denture Base Materials. Journal of Prosthodontics 29:6, pages 524-528.
Crossref
V. L. Bogdanov, A. Ya. Grigorenko, G. V. Sorochenko & N. N. Tormakhov. (2020) Influence of shape and geometric parameters of clasp on the strength and holding force of removable orthopedic dentures. Matematychni Metody Ta Fizyko-Mekhanichni Polya 63:1.
Crossref
Tamaki Hada, Tetsuya Suzuki, Shunsuke Minakuchi & Hidekazu Takahashi. (2020) Reduction in maxillary complete denture deformation using framework material made by computer-aided design and manufacturing systems. Journal of the Mechanical Behavior of Biomedical Materials 103, pages 103514.
Crossref
Nikola GligorijevićR.R., Marko IgićA.A., Milena KostićM.M. & Ana PejčićS.S.. (2020) Properties and applications of dental polyamides. Acta stomatologica Naissi 36:82, pages 2098-2105.
Crossref
Licia Manzon, Giovanni Fratto, Ottavia Poli & Emilia Infusino. (2019) Patient and Clinical Evaluation of Traditional Metal and Polyamide Removable Partial Dentures in an Elderly Cohort. Journal of Prosthodontics 28:8, pages 868-875.
Crossref
Toshiki Yamazaki, Natsuko Murakami, Shizuka Suzuki, Kazuyuki Handa, Masaru Yatabe, Hidekazu Takahashi & Noriyuki Wakabayashi. (2019) Influence of block-out on retentive force of thermoplastic resin clasps: an in vitro experimental and finite element analysis. Journal of Prosthodontic Research 63:3, pages 303-308.
Crossref
Takeuchi Hiroki, Iwata Yoshihiro, Nakata Toyoki, Ohkubo Chikahiro, Komiyama Osamu & Kawara Misao. (2019) Evaluation of Resin Clasps with Different Design by Retentive Force. International Journal of Oral-Medical Sciences 18:1, pages 68-73.
Crossref
Vladimir Prpic, Ivan Slacanin, Zdravko Schauperl, Amir Catic, Niksa Dulcic & Samir Cimic. (2019) A study of the flexural strength and surface hardness of different materials and technologies for occlusal device fabrication. The Journal of Prosthetic Dentistry 121:6, pages 955-959.
Crossref
Hidemasa Shimpo & Chikahiro Ohkubo. (2019) Bonding of auto-polymerized poly(methyl methacrylate) resin to polyamide thermoplastic resin. Asian Pacific Journal of Dentistry 19:2, pages 65-69.
Crossref
So-Yeon Song, Kyoung-Soo Kim, Jeong-Yol Lee & Sang-Wan Shin. (2019) Physical properties and color stability of injection-molded thermoplastic denture base resins. The Journal of Advanced Prosthodontics 11:1, pages 32.
Crossref
V. F. Makeev, V. R. Skalskyi & Ya. R. Hunovskyi. (2019) COMPARATIVE EVALUATION OF POLYMERIC MATERIALS FOR THE REMOVABLE DENTURES BASIS BY THE RESULTS OF EXPERIMENTAL STUDIES ON TENSILE OF ACOUSTIC EMISSION METHOD. Bulletin of Problems Biology and Medicine 1:1, pages 225.
Crossref
Rajul Vivek, Ashish Kumar, Thakur Prasad Chaturvedi & Rajiv Prakash. 2019. Materials for Biomedical Engineering. Materials for Biomedical Engineering 441 462 .
Hae-Hyoung LEE, Jung-Hwan LEE, Tae-Hyun YANG, Yu-Jin KIM, Si-Chul KIM, Gyu-Ri KIM, Hyung-Rae KIM, Chung-Jae LEE & Chikahiro OKUBO. (2018) Evaluation of the flexural mechanical properties of various thermoplastic denture base polymers. Dental Materials Journal 37:6, pages 950-956.
Crossref
Ippei Hamanaka, Kota Isshi & Yutaka Takahashi. (2018) Fabrication of a nonmetal clasp denture supported by an intraoral scanner and CAD-CAM. The Journal of Prosthetic Dentistry 120:1, pages 9-12.
Crossref
Mihaela Păpușa Vasiliu, Liliana Sachelarie, Carmen Stadoleanu, Cătălina Gîrbea & Agripina Zaharia. (2018) Volumetric Change as a Parameter for the Accuracy of Impression Materials. Journal of Biomimetics, Biomaterials and Biomedical Engineering 36, pages 17-23.
Crossref
Yunhan SunSo-Yeon Song, Ki-Sun LeeJin-Hong Park, Jae-Jun Ryu & Jeong-Yol Lee. (2018) Effects of relining materials on the flexural strength of relined thermoplastic denture base resins. The Journal of Advanced Prosthodontics 10:5, pages 361.
Crossref
M. I. F. Ibrahim, M. U. Rosli, Muhammad Ikman Ishak, M. S. Zakaria, Mohd Riduan Jamalludin, C. Y. Khor, W. M. Faizal W. A. Rahim, M. A. M. Nawi & Suhaimi Shahrin. Simulation based optimization of injection molding parameter for meso-scale product of dental component fabrication using response surface methodology (RSM). Simulation based optimization of injection molding parameter for meso-scale product of dental component fabrication using response surface methodology (RSM).
Hubban Nasution, Krid Kamonkhantikul, Mansuang Arksornnukit & Hidekazu Takahashi. (2018) Pressure transmission area and maximum pressure transmission of different thermoplastic resin denture base materials under impact load. Journal of Prosthodontic Research 62:1, pages 44-49.
Crossref
Manamu Nagakura, Yasuhiro Tanimoto & Norihiro Nishiyama. (2017) Fabrication and physical properties of glass-fiber-reinforced thermoplastics for non-metal-clasp dentures. Journal of Biomedical Materials Research Part B: Applied Biomaterials 105:8, pages 2254-2260.
Crossref
Hubban Nasution & Mansuang Arksornnukit. (2017) PMMA Demonstrated Higher Elastic Modulus and Nanohardness Compared with Polyamide Denture Base Materials. Key Engineering Materials 751, pages 643-648.
Crossref
Hirono Sasaki, Ippei Hamanaka, Yutaka Takahashi & Tomohiro Kawaguchi. (2017) Effect of Reinforcement on the Flexural Properties of Injection-Molded Thermoplastic Denture Base Resins. Journal of Prosthodontics 26:4, pages 302-308.
Crossref
Jung-Hwan Lee, Soo-Kyung JunSi-Chul KimChikahiro OkuboHae-Hyoung Lee. (2017) Investigation of the cytotoxicity of thermoplastic denture base resins. The Journal of Advanced Prosthodontics 9:6, pages 453.
Crossref
Manamu NAGAKURA, Yasuhiro TANIMOTO & Norihiro NISHIYAMA. (2017) Effect of fiber content on flexural properties of glass fiber-reinforced polyamide-6 prepared by injection molding. Dental Materials Journal 36:4, pages 415-421.
Crossref
Ippei Hamanaka, Hiroshi Shimizu & Yutaka Takahashi. (2017) Bond strength of a chairside autopolymerizing reline resin to injection-molded thermoplastic denture base resins. Journal of Prosthodontic Research 61:1, pages 67-72.
Crossref
Haitham Agha, Robert Flinton & Tritala Vaidyanathan. (2016) Optimization of Fracture Resistance and Stiffness of Heat-Polymerized High Impact Acrylic Resin with Localized E-Glass FiBER FORCE® Reinforcement at Different Stress Points. Journal of Prosthodontics 25:8, pages 647-655.
Crossref
Amani R. Moussa, Hisham S. El-Gabry, Mohamed M. El-Zawahry & Mohamed I. El-Anwar. (2016) Influence of a V-shaped palatal vault on denture base materials’ characteristics. Medical Research Journal 15:2, pages 76-81.
Crossref
Jie Fang, Chuanyong Wang, Yifei Li, Zhihe Zhao & Li Mei. (2016) Comparison of bacterial adhesion to dental materials of polyethylene terephthalate (PET) and polymethyl methacrylate (PMMA) using atomic force microscopy and scanning electron microscopy. Scanning 38:6, pages 665-670.
Crossref
Yoshihiro Iwata. (2016) Assessment of clasp design and flexural properties of acrylic denture base materials for use in non-metal clasp dentures. Journal of Prosthodontic Research 60:2, pages 114-122.
Crossref
Nadira A. HatimAmer A. TaqaSufian A. Yassin. (2016) Modification of heat cured acrylic resin by using additives to make a flexible acrylic resin denture base material: A pilot study. Edorium Journal of Dentistry 3:1, pages 1-11.
Crossref
Manamu Nagakura, Yasuhiro Tanimoto & Norihiro Nishiyama. (2016) Development of a Laboratory Glass Fiber-reinforced Thermoplastic for Removable Partial Dentures. International Journal of Oral-Medical Sciences 15:1, pages 1-9.
Crossref
Marit Øilo & Vidar Bakken. (2015) Biofilm and Dental Biomaterials. Materials 8:6, pages 2887-2900.
Crossref
Kenji Fueki, Chikahiro Ohkubo, Masaru Yatabe, Ichiro Arakawa, Masahiro Arita, Satoshi Ino, Toshikazu Kanamori, Yasuhiko Kawai, Misao Kawara, Osamu Komiyama, Tetsuya Suzuki, Kazuhiro Nagata, Maki Hosoki, Shin-ichi Masumi, Mutsuo Yamauchi, Hideki Aita, Takahiro Ono, Hisatomo Kondo, Katsushi Tamaki, Yoshizo Matsuka, Hiroaki Tsukasaki, Masanori Fujisawa, Kazuyoshi Baba, Kiyoshi Koyano & Hirofumi Yatani. (2014) Clinical application of removable partial dentures using thermoplastic resin. Part II: Material properties and clinical features of non-metal clasp dentures. Journal of Prosthodontic Research 58:2, pages 71-84.
Crossref
Mieszko Wieckiewicz, Volker Opitz, Gert Richter & Klaus W. Boening. (2014) Physical Properties of Polyamide-12 versus PMMA Denture Base Material. BioMed Research International 2014, pages 1-8.
Crossref
Misao Kawara, Yoshihiro Iwata, Masatoshi Iwasaki, Yoshihiro Komoda, Takashi Iida, Takashi Asano & Osamu Komiyama. (2014) Scratch test of thermoplastic denture base resins for non-metal clasp dentures. Journal of Prosthodontic Research 58:1, pages 35-40.
Crossref
Juro WADACHI, Masayuki SATO & Yoshimasa IGARASHI. (2013) Evaluation of the rigidity of dentures made of injection-molded materials. Dental Materials Journal 32:3, pages 508-511.
Crossref
Hidekazu OSADA, Hidemasa SHIMPO, Tohru HAYAKAWA & Chikahiro OHKUBO. (2013) Influence of thickness and undercut of thermoplastic resin clasps on retentive force. Dental Materials Journal 32:3, pages 381-389.
Crossref
Kenji Fueki, Chikahiro Ohkubo, Masaru Yatabe, Ichiro Arakawa, Masahiro Arita, Satoshi Ino, Toshikazu Kanamori, Yasuhiko Kawai, Misao Kawara, Osamu Komiyama, Tetsuya Suzuki, Kazuhiro Nagata, Maki Hosoki, Shin-ichi Masumi, Mutsuo Yamauchi, Hideki Aita, Takahiro Ono, Hisatomo Kondo, Katsushi Tamaki, Yoshizo Matsuka, Hiroaki Tsukasaki, Masanori Fujisawa, Kazuyoshi Baba & Kiyoshi Koyano. (2013) Clinical application of removable partial dentures using thermoplastic resin (non-metal clasp dentures). Annals of Japan Prosthodontic Society 5:4, pages 387-408.
Crossref
Tomoji Hirose. (2013) Flexural Properties of Different Commercial Thermoplastic Resins for ^|^ldquo;Non-clasp Dentures^|^rdquo;. Annals of Japan Prosthodontic Society 5:3, pages 272-280.
Crossref
Masayasu Ito, Alvin G. Wee, Takanari Miyamoto & Yasuhiko Kawai. (2013) The combination of a nylon and traditional partial removable dental prosthesis for improved esthetics: A clinical report. The Journal of Prosthetic Dentistry 109:1, pages 5-8.
Crossref
Hae-Hyoung LEE, Chung-Jae LEE & Kenzo ASAOKA. (2012) Correlation in the mechanical properties of acrylic denture base resins. Dental Materials Journal 31:1, pages 157-164.
Crossref

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Order Reprints Request Corporate Permissions

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

Request Academic Permissions

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.

Related research

People also read lists articles that other readers of this article have read.

Recommended articles lists articles that we recommend and is powered by our AI driven recommendation engine.

Cited by lists all citing articles based on Crossref citations.
Articles with the Crossref icon will open in a new tab.