152
Views
11
CrossRef citations to date
0
Altmetric
Original Article

Non-invasive, in-vivo electrical impedance of EMT-6 tumours during hyperthermia: Correlation with morphology and tumour-growth-delay

, &
Pages 1-20 | Received 02 Oct 1995, Accepted 11 Sep 1996, Published online: 09 Jul 2009
 

Abstract

The electrical impedance at frequencies from 100 Hz to 40 MHz of EMT-6 tumours was measured non-invasively, in vivo, during hyperthermia using an apparatus constructed for this purpose. Histology and morphometry were performed on tumours harvested periodically during the heating. A ratio of conductivities at two frequencies (s`10MHz/s`10kHz). which minimizes the tissue temperature-coefficient effects, was used to correlate impedance changes with the histopathological changes. The bulk of the cell population followed a necrotic cell death sequence during the heating. Initial increase of the s`-ratio correlated with cell swelling, and a reversal of the rate of this increase correlated with the appearance of small membrane breaks and evidence of mitochondrial damage. A continued, slowing s`-ratio increase to a maximum correlated with continued cell swelling accompanied by increasing membrane disruption. The subsequent decrease in u-ratio correlated with continued general cell lysing. Between the appearance of the first membrane breaks (s`-ratio rate peak) and the evidence of general lysing (s`-ratio peak), the tumour-growth-delay increased non-linearly. Because the s`-ratio consistently discerned these events, these measurements were able to predict the fate of this cell population when subjected to hyperthermia. Knowledge of temperature or time of heating was not required.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.