Swelling Kinetics of HPMC Tablets

References

• Astarita, G., and Sarti, G. C. (1978). A class of mathematical models for sorption of swelling solvents in glassy polymers, Polym. Eng. Sci., 18(5), 388–395.
   Web of Science ®Google Scholar
• Astarita, G., and Joshi, S. (1979). Sample-dimension effects in the sorption of solvents in polymers—mathematical model, J. Membrane Sci., 4, 165–182.
   Web of Science ®Google Scholar
• Avachat, A., and Kotwal, V. (2007). Design and evaluation of matrix-based controlled release tablets of diclofenac sodium and chondroitin sulphate, Aaps Pharm., 8(4), 51–56.
   Google Scholar
• Avalle, P., Pygall, S. R., Pritchard, J., Jastrzemska, A. (2012). Interrogating erosion-based drug liberation phenomena from hydrophilic matrices using near infrared (NIR) spectroscopy. Europ. J. Pharm. Sci., 48(1–2), 72–79.
   PubMed Web of Science ®Google Scholar
• Bajwa, G. S., Hoebler, K., Sammon, C., Timmins, P., and Melia, C. D. (2006). Microstructural imaging of early gel layer formation in HPMC matrices, J. Pharm. Sci., 95(10), 2145–2157.
   PubMed Web of Science ®Google Scholar
• Baumgartner, S., Kristl, J., and Peppas, N. A. (2002). Network structure of cellulose ethers used in pharmaceutical applications during swelling and at equilibrium, Pharm. Res., 19(8), 1084–1090.
   PubMed Web of Science ®Google Scholar
• Bernik, D. L., Zubiri, D., Monge, M. E., and Negri, R. M. (2006). New kinetic model of drug release from swollen gels under non-sink conditions, Colloids Surf. A: Physicochem. Eng. Aspects, 273 (1), 165–173.
   Web of Science ®Google Scholar
• Bettini, R, Catellani, P. L., Santi, P., Massimo, G., Peppas, N. A., and Colombo, P. (2001). Translocation of drug particles in HPMC matrix gel layer: effect of drug solubility and inuence on release rate, J. Controlled Release, 70(3), 383–391.
   PubMed Web of Science ®Google Scholar
• Bettini, R., Colombo, P., Massimo, G., Catellani, P. L., and Vitali, T. (1994). Swelling and drug release in hydrogel matrices: polymer viscosity and matrix porosity effects, Europ. J. Pharm. Sci., 2(3), 213–219.
   Web of Science ®Google Scholar
• Blagoeva, R., and Nedev, A. (2006). Monolithic controlled delivery systems: Part I. Basic characteristics and mechanisms, Bioautomation, 4, 80–88.
   Google Scholar
• Borgquist, P., Körner, A., Piculell, L., Larsson, A., and Axelsson, A. (2006). A model for the drug release from a polymer matrix table effects of swelling and dissolution, J. Controlled Release, 113(3), 216–225.
   PubMed Web of Science ®Google Scholar
• Chen, Y. Y., Hughes, L. P., Gladden, L. F., and Mantle, M. D. (2010). Quantitative ultra-fast MRI of HPMC swelling and dissolution, J. Pharm. Sci., 99(8), 3462–3472.
   PubMed Web of Science ®Google Scholar
• Chirico, S., Dalmoro, A., Lamberti, G., Russo, G., and Titomanlio, G. (2007). Analysis and modeling of swelling and erosion behavior for pure HPMC tablet, J. Controlled Release, 122(2), 181–188.
   PubMed Web of Science ®Google Scholar
• Colombo, P., Bettini, R., Santi, P., De Ascentiis, A., and Peppas, N. A. (1996). Analysis of the swelling and release mechanisms from drug delivery systems with emphasis on drug solubility and water transport, J. Controlled Release, 39(2), 231–237.
   Web of Science ®Google Scholar
• Colombo, P., Bettini, R., Massimo, G., Catellani, P. L., Santi, P., and Peppas, N. A. (1995). Drug diffusion front movement is important in drug release control from swellable matrix tablets, J. Pharm. Sci., 84(8), 991–997.
   PubMed Web of Science ®Google Scholar
• Colombo, P., Bettini, R., and Peppas, N. A. (1999) Observation of swelling process and diffusion front position during swelling in hydroxypropyl methyl cellulose (HPMC) matrices containing a soluble drug, J. Controlled Release, 61(1), 83–91.
   PubMed Web of Science ®Google Scholar
• Colombo, P., Bettini, R., Santi, P., and Peppas, N. A. (2000). Swellable matrices for controlled drug delivery: gel-layer behaviour, mechanisms and optimal performance, Pharm. Sci. Tech Today, 3(6), 198–204.
   PubMedGoogle Scholar
• Crank, J. (1979). The Mathematics of Diffusion. Oxford University Press.
   Google Scholar
• Crank, J. (1984). Free and Moving Boundary Problems. Clarendon Press, Oxford.
   Google Scholar
• Dahlberg, C., Fureby, A., Schuleit, M., Dvinskikh, S. V., and Furó, I. (2007). Polymer mobilization and drug release during tablet swelling. A 1HNMR and NMR microimaging study, J. Controlled Release, 122(2), 199–205.
   PubMed Web of Science ®Google Scholar
• Devotta, I., Badiger, M. V., Rajamohanan, P. R., Ganapathy, S., and Mashelkar, R. A. (1995). Unusual retardation and enhancement in polymer dissolution: role of disengagement dynamics, Chem. Eng. Sci., 50(16), 2557–2569.
   Web of Science ®Google Scholar
• Escudero, J. J., Ferrero, C., and Jimenez-Castellanos, M. R. (2010). Compaction properties, drug release kinetics and fronts movement studies from matrices combining mixtures of swellable and inert polymers. II. Effect of HPMC with different degrees of methoxy/hydroxypropyl substitution, Int. J. Pharm., 387(1), 56–64.
   PubMed Web of Science ®Google Scholar
• Fu, X. C., Wang, G. P., Liang, W. Q., and Chow, M. S. S. (2004). Prediction of drug release from HPMC matrices: effect of physicochemical properties of drug and polymer concentration, J. Controlled Release, 95(2), 209–216.
   PubMed Web of Science ®Google Scholar
• Fuertes, I., Caraballo, I., Miranda, A., and Mill_an, M. (2010). Study of critical points of drugs with different solubilities in hydrophilic matrices, Int. J. Pharm., 383(1), 138–146.
   PubMed Web of Science ®Google Scholar
• Fyfe, C. A., and Blazek, A. I. (1997). Investigation of hydrogel formation from hydroxypropylmethylcellulose (HPMC) by NMR spectroscopy and NMR imaging techniques, Macromolecules, 30(20), 6230–6237.
   Web of Science ®Google Scholar
• Fyfe, C. A., and Blazek-Welsh, A. I. (2000). Quantitative NMR imaging study of the mechanism of drug release from swelling hydroxypropylmethylcellulose tablets, J. Controlled Release, 68(3), 313–333.
   PubMed Web of Science ®Google Scholar
• Gao, P., and Meury, R. H. (1996). Swelling of hydroxypropyl methylcellulose matrix tablets. 1. Characterization of swelling using a novel optical imaging method, J. Pharm. Sci., 85(7), 725–731.
   PubMed Web of Science ®Google Scholar
• Grassi, M., and Grassi, G. (2005). Mathematical modeling and controlled drug delivery: matrix systems, Current Drug Delivery, 2(1), 97–116.
   PubMedGoogle Scholar
• Guidotti, P. (2002). A 2-D free boundary problem with onset of a phase and singular elliptic boundary value problems, J. Evolution Equations, 2(4), 395–424.
   Web of Science ®Google Scholar
• Guidotti, P., and Pelesko, J. A. (1998). Transient instability in case II diffusion, J. Polym. Sci. Part B Polym. Phys., 36(16), 2941–2947.
   Web of Science ®Google Scholar
• Kaunisto, E., Marucci, M., Borgquist, P., and Axelsson, A. (2011). Mechanistic modelling of drug release from polymer-coated and swelling and dissolving polymer matrix systems, Int. J. Pharm., 418(1), 54–77.
   PubMed Web of Science ®Google Scholar
• Kaunisto, E., Tajarobi, F., Abrahmsen-Alami, S., Larsson, A., Nilsson, B., and Axelsson, A. (2013). Mechanistic modelling of drug release from a polymer matrix using magnetic resonance microimaging. Eur. J. Pharm. Sci., 48(4), 698–708.
   PubMed Web of Science ®Google Scholar
• Kavanagh, N., and Corrigan, O. I. (2004). Swelling and erosion properties of hydroxypropylmethylcellulose (hypromellose) matrices— influence of agitation rate and dissolution medium composition, Int. J. Pharm., 279(1), 141–152.
   PubMed Web of Science ®Google Scholar
• Khullar, P., Khar, R. K., and Agarwal, S. P. (1998). Evaluation of guar gum in the preparation of sustained-release matrix tablets, Drug Develop. Ind. Pharm., 24(11), 1095–1099.
   PubMed Web of Science ®Google Scholar
• Kiil, S., and Dam-Johansen, K. (2003). Controlled drug delivery from swellable hydroxypropylmethylcellulose matrices: model-based analysis of observed radial front movements, J. Controlled Release, 90(1), 1–21.
   PubMed Web of Science ®Google Scholar
• Kimber, J. A., Kazarian, S. G., and _Stepánek, F. (2013). Formulation design space analysis for drug release from swelling polymer tablets, Powder Technol., 236, 179–187.
   Web of Science ®Google Scholar
• Konrad, R., Christ, A., Zessin, G., and Cobet, U. (1998). The use of ultrasound and penetrometer to characterize the advancement of swelling and eroding fronts in HPMC matrices, Int. J. Pharm., 163(1), 123–131.
   Web of Science ®Google Scholar
• Kulinowski, P., Dorozyński, P., Mlynarczyk, A., and Weglarz, W. P. (2011). Magnetic resonance imaging and image analysis for assessment of HPMC matrix tablets structural evolution in USP Apparatus 4, Pharm. Res., 28(5), 1065–1073.
   PubMed Web of Science ®Google Scholar
• Laity, P. R., and Cameron, R. E. (2010a). Synchrotron x-ray microtomographic study of tablet swelling, Eur. J. Pharm. Biopharm., 75(2), 263–276.
   PubMed Web of Science ®Google Scholar
• Laity, P. R., and Cameron, R. E. (2010b). Synchrotron x-ray microtomographic study of tablet swelling, Eur. J. Pharm. Biopharm., 75(2), 263–276.
   PubMed Web of Science ®Google Scholar
• Leskinen, J. T. T., Hakulinen, M. A., Kuosmanen, M., Ketolainen, J., Abrahms_en-Alami, S., and Lappalainen, R. (2011). Monitoring of swelling of hydrophilic polymer matrix tablets by ultrasound techniques, Int. J. Pharm., 404(1), 142–147.
   PubMed Web of Science ®Google Scholar
• Lin, C.-C., and Metters, A. T. (2006). Hydrogels in controlled release formulations: network design and mathematical modeling, Adv. Drug Deliv. Rev., 58(12), 1379–1408.
   PubMed Web of Science ®Google Scholar
• Narasimhan, B. (2001). Mathematical models describing polymer dissolution: consequences for drug delivery, Adv. Drug Deliv. Rev., 48(2), 195–210.
   PubMed Web of Science ®Google Scholar
• Narasimhan, B., and Peppas, N. A. (1996a). On the importance of chain reptation in models of dissolution of glassy polymers, Macromolecules, 29(9), 3283–3291.
   Web of Science ®Google Scholar
• Narasimhan, B., and Peppas, N. A. (1997). Molecular analysis of drug delivery systems controlled by dissolution of the polymer carrier, J. Pharm. Sci., 86(3), 297–304.
   PubMed Web of Science ®Google Scholar
• Narasimhan, B., and Peppas, N. A. (1996b). Disentanglement and reptation during dissolution of rubbery polymers, J. Polym. Science-B-Polymer Phys. Edition, 34(5), 947–962.
   Web of Science ®Google Scholar
• Navarro-Lupión, F.-J., Bustamante, P., and Escalera, B. (2005). Relationship between swelling of hydroxypropylmethylcellulose and the Hansen and Karger partial solubility parameters, J. Pharm. Sci., 94(7), 1608–1616.
   PubMed Web of Science ®Google Scholar
• Pajander, J., Baldursdottir, S., Rantanen, J., and Østergaard, J. (2012). Behaviour of HPMC compacts investigated using UV-imaging, Int. J. Pharm., 427(2), 345–353.
   PubMed Web of Science ®Google Scholar
• Papanu, J. S., Bell, A. T., Hess, D. W.. (1989). Transport models for swelling and dissolution of thin polymer _lms, J. Appl. Polym. Sci., 38(5), 859–885.
   Web of Science ®Google Scholar
• Peppas, N. A., Wu, J. C., and von Meerwall, E. D. (1994). Mathematical modeling and experimental characterization of polymer dissolution, Macromolecules, 27(20), 5626–5638.
   Web of Science ®Google Scholar
• Rinaki, E., Valsami, G., and Macheras, P. (2003). The power law can describe the ‘entire’ drug release curve from HPMC-based matrix tablets: a hypothesis, Int. J. Pharm., 255(1), 199–207.
   PubMed Web of Science ®Google Scholar
• Sai Cheong Wan, L., Wan Sia Heng, P., and Fun Wong, L. (1995). Matrix swelling: a simple model describing extent of swelling of HPMC matrices. Int. J. Pharm., 116(2), 159–168.
   Web of Science ®Google Scholar
• Sasa, B., Odon, P., Stane, S., and Julijana, K. (2006). Analysis of surface properties of cellulose ethers and drug release from their matrix tablets, Eur. J. Pharm. Sci., 27(4), 375–383.
   PubMed Web of Science ®Google Scholar
• Shah, N., Zhang, G., Apelian, V., Zeng, F., Infeld, M. H., and Malick, A. W. (1993). Prediction of drug release from hydroxypropyl methylcellulose (HPMC) matrices: effect of polymer concentration, Pharm. Res., 10(11), 1693–1695.
   PubMed Web of Science ®Google Scholar
• Siepmann, J., and Peppas, N. A. (2012). Modeling of drug release from delivery systems based on hydroxypropyl methylcellulose (HPMC), Adv. Drug Deliv. Rev.
   Web of Science ®Google Scholar
• Siepmann, J., Podual, K., Sriwongjanya, M., Peppas, N. A., and Bodmeier, R. (1999). A new model describing the swelling and drug release kinetics from hydroxypropyl methylcellulose tablets, J. Pharm. Sci., 88(1), 65–72.
   PubMed Web of Science ®Google Scholar
• Sung, K. C., Nixon, P. R., Skoug, J. W., Robert Ju, T., Gao, P., Topp, E. M., and Patel, M. V. (1996). Effect of formulation variables on drug and polymer release from HPMC-based matrix tablets, Int. J. Pharm., 142(1), 53–60.
   Web of Science ®Google Scholar
• Tajarobi, F., Abrahmsén-Alami, S., Carlsson, A. S., and Larsson, A. (2009). Simultaneous probing of swelling, erosion and dissolution by NMR-microimaging— effect of solubility of additives on HPMC matrix tablets, Eur. J. Pharm. Sci., 37(2), 89–97.
   PubMed Web of Science ®Google Scholar
• Tritt-Goc, J., and Piślewski, N. (2002). Magnetic resonance imaging study of the swelling kinetics of hydroxypropylmethylcellulose (HPMC) in water, J. Controlled Release, 80(1), 79–86.
   PubMed Web of Science ®Google Scholar
• Vlachou, M., Naseef, H., Efentakis, M., Tarantili, P. A., and Andreopoulos, A. G. (2001). Swelling properties of various polymers used in controlled release systems, J. Biomat. Appl., 16(2), 125–138.
   PubMed Web of Science ®Google Scholar