Effect of different surface treatments on the shear bond strength of resin cement to zirconia ceramic and metal alloyFootnote^*

^*This study was presented in September 2015 at the 47th International Association of Dental Research (CED-IADR) meeting in Antalya, Turkey.

References

• Deepak K, Ahila SC, Muthukumar B, et al. Comparative evaluation of effect of laser on shear bond strength of ceramic bonded with two base metal alloys: an in vitro study. Indian J Dent Res. 2013;24:610–615.
   PubMedGoogle Scholar
• Wataha JC, Drury JL, Chung WO. Nickel alloys in the oral environment. Expert Rev Med Devices. 2013;10:519–539.10.1586/17434440.2013.811868
   PubMed Web of Science ®Google Scholar
• Wataha JC, Shor K. Palladium alloys for biomedical devices. Expert Rev Med Devices. 2010;7:489–501.10.1586/erd.10.25
   PubMed Web of Science ®Google Scholar
• Lüthy H, Loeffel O, Hammerle CH. Effect of thermocycling on bond strength of luting cements to zirconia ceramic. Dent Mater. 2006;22:195–200.10.1016/j.dental.2005.04.016
   PubMed Web of Science ®Google Scholar
• Subasi MG, Inan ÖzgürO. Evaluation of the topographical surface changes and roughness of zirconia after different surface treatments. Lasers Med Sci. 2012;27:735–742.10.1007/s10103-011-0965-3
   PubMed Web of Science ®Google Scholar
• Nakamura S, Yoshida K, Kamada K, et al. Bonding between resin luting cement and glass infiltrated alumina-reinforced ceramics with silane coupling agent. J Oral Rehabil. 2004;31:785–789.10.1111/j.1365-2842.2004.01304.x
   PubMed Web of Science ®Google Scholar
• Sari F, Secilmis A, Simsek I, et al. Shear bond strength of indirect composite material to monolithic zirconia. J Adv Prosthodont. 2016;8:267–274.10.4047/jap.2016.8.4.267
   PubMed Web of Science ®Google Scholar
• Yilmaz-Savas T, Demir N, Ozturk AN, et al. Effect of different surface treatments on the bond strength of lithium disilicate ceramic to the zirconia core. Photomed Laser Surg. 2016;34:236–243.10.1089/pho.2015.4063
   PubMed Web of Science ®Google Scholar
• Sailer I, Feher A, Filser F, et al. Five-year clinical results of zirconia frameworks for posterior fixed partial dentures. Int J Prosthodont. 2007;20:383–388.
   PubMed Web of Science ®Google Scholar
• Molin MK, Karlsson SL. Five-year clinical prospective evaluation of zirconia-based Denzir 3-unit FPDs. Int J Prosthodont. 2008;21:223–237.
   PubMed Web of Science ®Google Scholar
• Wolfart M, Lehmann F, Wolfart S, et al. Durability of the resin bond strength to zirconia ceramic after using different surface conditioning methods. Dent Mater. 2007;23:45–50.10.1016/j.dental.2005.11.040
   PubMed Web of Science ®Google Scholar
• Basilio Mde Mariana de AlmeidaA, Cardoso kV, Antonio SG, et al. Effects of artificial aging conditions on yttria-stabilized zirconia implant abutments. J Prosthet Dent. 2016;116:277–285.10.1016/j.prosdent.2016.01.011
   PubMed Web of Science ®Google Scholar
• Springate SD, Winchester LJ. An evaluation of zirconium oxide brackets: a preliminary laboratory and clinical report. Br J Orthod. 1991;18:203–209.10.1179/bjo.18.3.203
   PubMedGoogle Scholar
• Garvie RC, Hannink RH, Pascoe RT. Ceramic steel? Nature. 1975;258:703–704.10.1038/258703a0
   Web of Science ®Google Scholar
• Glauser R, Sailer I, Wohlwend A, et al. Experimental zirconia abutments for implant-supported single-tooth restorations in esthetically demanding regions: 4-year results of a prospective clinical study. Int J Prosthodont. 2004;17:285–290.
   PubMed Web of Science ®Google Scholar
• Hatanaka GR, Polli GS, Fais LMG, et al. Zirconia changes after grinding and regeneration firing. J Prosthet Dent. 2017;118:61–68.10.1016/j.prosdent.2016.09.026
   PubMed Web of Science ®Google Scholar
• Akpinar YZ, Yavuz T, Aslan MA, et al. Effect of different surface shapes formed by femtosecond laser on zirconia-resin cement shear bond strength. J Adhe Sci and Technol. 2015;29:149–157.10.1080/01694243.2014.977697
   Web of Science ®Google Scholar
• Kosmac T, Oblak C, Jevnikar P, Funduk N, Marion L. The effect of surface grinding and sandblasting on flexural strength and reliability of Y-TZP zirconia ceramic. Dent Mater. 1999;15:426–433.
   PubMed Web of Science ®Google Scholar
• Tholey MJ, Swain MV, Thiel N. SEM observations of porcelain Y-TZP interface. Dent Mater. 2009;25:857–862.10.1016/j.dental.2009.01.006
   PubMed Web of Science ®Google Scholar
• Moon JE, Kim SH, Lee JB, et al. The effect of preparation order on the crystal structure of yttria-stabilized tetragonal zirconia polycrystal and the shear bond strength of dental resin cements. Dent Mater. 2011;27:651–663.10.1016/j.dental.2011.03.005
   PubMed Web of Science ®Google Scholar
• Kelly JR, Denry I. Stabilized zirconia as a structural ceramic: an overview. Dent Mater. 2008;24:289–298.10.1016/j.dental.2007.05.005
   PubMed Web of Science ®Google Scholar
• Christel P, Meunier A, Heller M, et al. Mechanical properties and short-term in vivo evaluation of yttrium-oxide-partially-stabilized zirconia. J Biomed Mater Res. 1989;23:45–61.10.1002/(ISSN)1097-4636
   PubMed Web of Science ®Google Scholar
• da Silva Ferreira S, Hanashiro FS, de Souza-Zaroni WC, et al. Influence of aluminum oxide sandblasting associated with Nd:YAG or Er:YAG lasers on shear bond strength of a feldspathic ceramic to resin cements. Photomed Laser Surg. 2010;28:471–475.10.1089/pho.2009.2528
   PubMed Web of Science ®Google Scholar
• Ersu B, Yuzugullu B, Ruya Yazici A, et al. Surface roughness and bond strengths of glass-infiltrated alumina-ceramics prepared using various surface treatments. J Dent. 2009;37:848–856.10.1016/j.jdent.2009.06.017
   PubMed Web of Science ®Google Scholar
• Burke FJ, Fleming GJ, Nathanson D, et al. Are adhesive technologies needed to support ceramics? An assessment of the current evidence. J Adhes Dent. 2002;4:7–22.
   PubMedGoogle Scholar
• Chaiyabutr Y, McGowan S, Phillips KM, et al. The effect of hydrofluoric acid surface treatment and bond strength of a zirconia veneering ceramic. J Prosthet Dent. 2008;100:194–202.10.1016/S0022-3913(08)60178-X
   PubMed Web of Science ®Google Scholar
• Sato H, Yamada K, Pezzotti G, et al. Mechanical properties of dental zirconia ceramics changed with sandblasting and heat treatment. Dent Mater J. 2008;27:408–414.10.4012/dmj.27.408
   PubMed Web of Science ®Google Scholar
• Kern M, Wegner SM. Bonding to zirconia ceramic: adhesion methods and their durability. Dent Mater. 1998;14:64–71.10.1016/S0109-5641(98)00011-6
   PubMed Web of Science ®Google Scholar
• Stubinger S, Homann F, Etter C, et al. Effect of Er:YAG, CO(2) and diode laser irradiation on surface properties of zirconia endosseous dental implants. Lasers Surg Med. 2008;40:223–228.10.1002/(ISSN)1096-9101
   PubMed Web of Science ®Google Scholar
• Magne P, Paranhos MP, Burnett LH Jr. New zirconia primer improves bond strength of resin-based cements. Dent Mater. 2010;26:345–352.10.1016/j.dental.2009.12.005
   PubMed Web of Science ®Google Scholar
• Kasraei S, Rezaei-Soufi L, Heidari B, et al. Bond strength of resin cement to CO2 and Er:YAG laser-treated zirconia ceramic. Restor Dent Endod. 2014;39:296–302.10.5395/rde.2014.39.4.296
   PubMedGoogle Scholar
• Kirmali O, Akin H, Kapdan A. Evaluation of the surface roughness of zirconia ceramics after different surface treatments. Acta Odontol Scand. 2014;72:432–439.10.3109/00016357.2013.853320
   PubMed Web of Science ®Google Scholar
• Su N, Yue L, Liao Y, et al. The effect of various sandblasting conditions on surface changes of dental zirconia and shear bond strength between zirconia core and indirect composite resin. J Adv Prosthodont. 2015;7:506.10.4047/jap.2015.7.6.506
   PubMed Web of Science ®Google Scholar
• Aboushelib MN, Kleverlaan CJ, Feilzer AJ. Microtensile bond strength of different components of core veneered all-ceramic restorations. Part II: Zirconia veneering ceramics. Dent Mater. 2006;22:857–863.10.1016/j.dental.2005.11.014
   PubMed Web of Science ®Google Scholar
• Atsu SS, Kilicarslan MA, Kucukesmen HC, et al. Effect of zirconium-oxide ceramic surface treatments on the bond strength to adhesive resin. J Prosthet Dent. 2006;95:430–436.10.1016/j.prosdent.2006.03.016
   PubMed Web of Science ®Google Scholar
• Cura C, Ozcan M, Isik G, et al. Comparison of alternative adhesive cementation concepts for zirconia ceramic: glaze layer vs zirconia primer. J Adhes Dent. 2012;14:75–82.
   PubMed Web of Science ®Google Scholar
• Cavalcanti AN, Pilecki P, Foxton RM, et al. Evaluation of the surface roughness and morphologic features of Y-TZP ceramics after different surface treatments. Photomed Laser Surg. 2009;27:473–479.10.1089/pho.2008.2293
   PubMed Web of Science ®Google Scholar
• Ural C, Kulunk T, Kulunk S, et al. The effect of laser treatment on bonding between zirconia ceramic surface and resin cement. Acta Odontol Scand. 2010;68:354–359.10.3109/00016357.2010.514720
   PubMed Web of Science ®Google Scholar
• Akyil MS, Uzun H, Bayindir F. Bond strength of resin cement to yttrium-stabilized tetragonal zirconia ceramic treated with air abrasion, silica coating, and laser irradiation. Photomed Laser Surg. 2010;28:801–808.10.1089/pho.2009.2697
   PubMed Web of Science ®Google Scholar
• Paranhos MP, Burnett LH Jr, Magne P. Effect Of Nd:YAG laser and CO2 laser treatment on the resin bond strength to zirconia ceramic. Quintessence Int. 2011;42:79–89.
   PubMed Web of Science ®Google Scholar
• Kara O, Kara HB, Tobi ES, et al. Effect of various lasers on the bond strength of two zirconia ceramics. Photomed Laser Surg. 2015;33:69–76.10.1089/pho.2014.3841
   PubMed Web of Science ®Google Scholar
• Yavuz T, Dilber E, Kara HB, et al. Effects of different surface treatments on shear bond strength in two different ceramic systems. Lasers Med Sci. 2013;28:1233–1239.10.1007/s10103-012-1201-5
   PubMed Web of Science ®Google Scholar
• Kamada K, Yoshida K, Atsuta M. Effect of ceramic surface treatments on the bond of four resin luting agents to a ceramic material. J Prosthet Dent. 1998;79:508–513.10.1016/S0022-3913(98)70170-2
   PubMed Web of Science ®Google Scholar
• Rizvi NH. Femtosecond laser micromachining: current status and applications. Riken Rev. 2003;50:107–112.
   Google Scholar
• Fiedler S, Irsig R, Tiggesbaumker J, et al. Machining of Biocompatible Ceramics with Femtosecond Laser Pulses. Biomed Tech. 2013;58.
   Web of Science ®Google Scholar
• Delgado-Ruiz RA, Calvo-Guirado JL, Moreno P, et al. Femtosecond laser microstructuring of zirconia dental implants. J Biomed Mater Res B Appl Biomater. 2011;96:91–100.10.1002/jbm.b.v96b.1
   PubMed Web of Science ®Google Scholar
• Symietz C, Lehmann E, Gildenhaar R, et al. Femtosecond laser induced fixation of calcium alkali phosphate ceramics on titanium alloy bone implant material. Acta Biomater. 2010;6:3318–3324.10.1016/j.actbio.2010.02.016
   PubMed Web of Science ®Google Scholar
• Rethfeld B, Sokolowski-Tinten K, von der Linde D, et al. Timescales in the response of materials to femtosecond laser excitation. Appl Phys A. 2004;79:767–769.10.1007/s00339-004-2805-9
   Web of Science ®Google Scholar
• Subasi MG, Inan O. Influence of surface treatments and resin cement selection on bonding to zirconia. Lasers Med Sci. 2014;29:19–27.10.1007/s10103-012-1221-1
   PubMed Web of Science ®Google Scholar
• Derand T, Molin M, Kvam K. Bond strength of composite luting cement to zirconia ceramic surfaces. Dent Mater. 2005;21:1158–1162.10.1016/j.dental.2005.02.005
   PubMed Web of Science ®Google Scholar
• Blatz MB, Sadan A, Kern M. Resin-ceramic bonding: a review of the literature. J Prosthet Dent. 2003;89:268–274.10.1067/mpr.2003.50
   PubMed Web of Science ®Google Scholar
• de Oyague RC, Monticelli F, Toledano M, et al. Influence of surface treatments and resin cement selection on bonding to densely-sintered zirconium-oxide ceramic. Dent Mater. 2009;25:172–179.10.1016/j.dental.2008.05.012
   PubMed Web of Science ®Google Scholar
• Kumbuloglu O, Lassila LV, User A, et al. Bonding of resin composite luting cements to zirconium oxide by two air-particle abrasion methods. Oper Dent. 2006;31:248–255.10.2341/05-22
   PubMed Web of Science ®Google Scholar
• Akgungor G, Sen D, Aydin M. Influence of different surface treatments on the short-term bond strength and durability between a zirconia post and a composite resin core material. J Prosthet Dent. 2008;99:388–399.10.1016/S0022-3913(08)60088-8
   PubMed Web of Science ®Google Scholar
• Borges GA, Sophr AM, de Goes MF, et al. Effect of etching and airborne particle abrasion on the microstructure of different dental ceramics. J Prosthet Dent. 2003;89:479–488.10.1016/S0022-3913(02)52704-9
   PubMed Web of Science ®Google Scholar
• Usumez A, Hamdemirci N, Koroglu BY, et al. Bond strength of resin cement to zirconia ceramic with different surface treatments. Lasers Med Sci. 2013;28:259–266.10.1007/s10103-012-1136-x
   PubMed Web of Science ®Google Scholar
• Lin Y, Song X, Chen Y, et al. Effect of Er:YAG laser irradiation on bonding property of zirconia ceramics to resin cement. Photomed Laser Surg. 2013;31:619–625.10.1089/pho.2013.3489
   PubMed Web of Science ®Google Scholar
• Radovic I, Monticelli F, Goracci C, et al. Self-adhesive resin cements: a literature review. J Adhes Dent. 2008;10:251–258.
   PubMed Web of Science ®Google Scholar