References
- Agrawal AM, Dudhedia MS, Zimny E. Hot melt extrusion: development of an amorphous solid dispersion for an insoluble drug from mini-scale to clinical scale. Aaps Pharmscitech. 2016;17(1):133–147.
- Zhang Z, Chen Y, Deng J, et al. Solid dispersion of berberine-phospholipid complex/TPGS 1000/SiO2: preparation, characterization and in vivo studies. Int J Pharm. 2014;465(1–2):306–316.
- Peng T, She Y, Zhu C, et al. Influence of polymers on the physical and chemical stability of spray-dried amorphous solid dispersion: dipyridamole degradation induced by enteric polymers. Aaps Pharmscitech. 2018;19(6):2620–2629.
- Hanada M, Jermain SV, Lu X, et al. Predicting physical stability of ternary amorphous solid dispersion using specific mechanical energy in a hot melt extrusion process. Int J Pharm. 2018;548(1):571–585.
- Solanki N, Gupta SS, Serajuddin ATM. Rheological analysis of itraconazole-polymer mixtures to determine optimal melt extrusion temperature for development of amorphous solid dispersion. Eur J Pharm Sci. 2018;111:482–491.
- Feng D, Peng T, Huang Z, et al. Polymer–surfactant system based amorphous solid dispersion: precipitation inhibition and bioavailability enhancement of itraconazole. Pharmaceutics. 2018;10(2):53.
- Cui Y, Chiang PC, Choo EF, et al. Systemic in vitro and in vivo evaluation for determining the feasibility of making an amorphous solid dispersion of a B-Raf (rapidly accelerated fibrosarcoma) inhibitor. Int J Pharm. 2013;454(1):241–248.
- Gupta SS, Solanki N, Serajuddin AT. Investigation of thermal and viscoelastic properties of polymers relevant to hot melt extrusion, IV: Affinisol™ HPMC HME Polymers. AAPS PharmSciTech. 2016;17(1):148–157.
- Huang S, O'Donnell KP, Keen JM, et al. A new extrudable form of hypromellose: AFFINISOL™ HPMC HME. AAPS PharmSciTech. 2016;17(1):106–119.
- Davis MT, Potter CB, Walker GM. Downstream processing of a ternary amorphous solid dispersion: the impacts of spray drying and hot melt extrusion on powder flow, compression and dissolution. Int J Pharm. 2018;544(1):242–253.
- Barmpalexis P, Karagianni A, Kachrimanis K. Molecular simulations for amorphous drug formulation: polymeric matrix properties relevant to hot-melt extrusion. Eur J Pharm Sci. 2018;119:259–267.
- Li S, Yu T, Tian Y, et al. Mechanochemical synthesis of pharmaceutical cocrystal suspensions via hot melt extrusion: enhancing cocrystal yield. Mol Pharm. 2017;15(9):3741–3754.
- Brunetto MR, Obando MA, Fernández A, et al. Column-switching high-performance liquid chromatographic analysis of carbamazepine and its principal metabolite in human plasma with direct sample injection using an alkyl-diol silica (ADS) precolumn. Talanta. 2002;58(3):535–542.
- Alamri MS, Mohamed AA, Hussain S. Effect of okra gum on the pasting, thermal, and viscous properties of rice and sorghum starches. Carbohydr Polym. 2012;89(1):199–207.
- Ogawa N, Hiramatsu T, Suzuki R, et al. Improvement in the water solubility of drugs with a solid dispersion system by spray drying and hot-melt extrusion with using the amphiphilic polyvinyl caprolactam-polyvinyl acetate-polyethylene glycol graft copolymer and d-mannitol. Eur J Pharm Sci. 2018;111:205–214.
- Subramanian M, Birnbaum AK, Remmel RP. High-speed simultaneous determination of nine antiepileptic drugs using liquid chromatography-mass spectrometry. Ther Drug Monit. 2008;30(3):347.
- Chan SY, Toh SM, Khan NH, et al. The improved dissolution performance of a post processing treated spray dried crystalline solid dispersion of poorly soluble drugs. Drug Dev Ind Pharm. 2016;42(11):1.
- Gandhi AV, Thipsay P, Kirthivasan B, et al. Adsorption onto mesoporous silica using supercritical fluid technology improves dissolution rate of carbamazepine—a poorly soluble compound. Aaps Pharmscitech. 2017;18(8):3140–3150.
- Al-Zoubi N, Odah F, Obeidat W, et al. Evaluation of spironolactone solid dispersions prepared by co-spray drying with Soluplus ®; and PVP and influence of tableting on drug release. J Pharm Sci. 2018;107(9):2385–2398.
- Dp M, K K, M M, et al. Dissolution rate enhancement and physicochemical characterization of carbamazepine-poloxamer solid dispersions. Pharm Dev Technol. 2016;21(3):268–276.
- Figueirêdo C, Nadvorny D, De AMV, et al. Enhanced delivery of fixed-dose combination of synergistic antichagasic agents posaconazole-benznidazole based on amorphous solid dispersions. Eur J Pharm Sci. 2018;119:208–218.
- Xia Y, Yuan M, Deng Y, et al. Different effects of silica added internal or external on in vitro dissolution of indomethacin hot-melt extrudates. Int J Pharm. 2017;534(1–2):272–278.
- Hussan KPS, Thayyil MS, Deshpande SK, et al. Molecular dynamics, physical and thermal stability of neat amorphous amlodipine besylate and in binary mixture. Eur J Pharm Sci. 2018;119:268–278.
- Caron V, Hu Y, Tajber L, et al. Amorphous solid dispersions of sulfonamide/soluplus® and sulfonamide/PVP prepared by ball milling. Aaps Pharmscitech. 2013;14(1):464–474.
- Singh A, Humbeeck JV, Mooter GVD. A new twist in the old story-can compression induce mixing of phase separated solid dispersions? A case study of spray-dried miconazole-PVP VA64 solid dispersions. Pharm Res. 2014;31(11):3191–3200.
- Purohit HS, Taylor LS. Phase behavior of ritonavir amorphous solid dispersions during hydration and dissolution. Pharm Res. 2017;34(12):2842–2861.
- Rumondor AC, Taylor LS. Effect of polymer hygroscopicity on the phase behavior of amorphous solid dispersions in the presence of moisture. Mol Pharm. 2010;7(2):477–490.
- Jog R, Gokhale R, Burgess DJ. Solid state drug-polymer miscibility studies using the model drug ABT-102 . Int J Pharm. 2016;509(1–2):285–295.
- Singh B, Ahuja N. Development of controlled-release buccoadhesive hydrophilic matrices of diltiazem hydrochloride: optimization of bioadhesion, dissolution, and diffusion parameters. Drug Dev Ind Pharm. 2002;28(4):431–442.
- Pawar J, Narkhede R, Amin P, et al. Design and evaluation of topical diclofenac sodium gel using hot melt extrusion technology as a continuous manufacturing process with Kolliphor® P407. AAPS PharmSciTech. 2017;18(6):2303–2315.