References
- Larsson JK, Lundgren J, Asbjörnsson E, et al. Extensive introduction of ultra high strength steels sets new standards for welding in the body shop. Weld World. 2009;53(5–6):4–14. doi: 10.1007/BF03266709
- Svensson LE, Karlsson L, Söder R. Welding enabling light weight design of heavy vehicle chassis. Sci Technol Weld Join. 2015;20(6):473–482. doi: 10.1179/1362171814Y.0000000269
- Harati E, Svensson LE, Karlsson L. Comparison of effect of shot-peening with HFMI treatment or use of LTT consumables on fatigue strength of 1300 MPa yield strength steel weldments. Weld World. 2020;64(7):1237–1244. doi: 10.1007/s40194-020-00917-z
- Kah P, Pirinen M, Suoranta R, et al. Welding of ultra high strength steels. Adv Mater Res. 2013;849:357–365. doi: 10.4028/www.scientific.net/AMR.849.357
- Amraei M, Ahola A, Afkhami S, et al. Effects of heat input on the mechanical properties of butt-welded high and ultra-high strength steels. Eng Struct. 2019;198:109460. doi: 10.1016/j.engstruct.2019.109460
- Bhadeshia HKDH, MacKay DJC, Svensson LE. Impact toughness of C–Mn steel arc welds – Bayesian neural network analysis. Mater Sci Technol. 1995;11(10):1046–1051. doi: 10.1179/mst.1995.11.10.1046
- Lobanov LM, Poznyakov VD, Makhnenko OV. Formation of cold cracks in welded joints from high-strength steels with 350–850 MPa yield strength. Paton Weld J. 2016;7:7–12.
- Gliner RE. Welding of advanced high-strength sheet steels. Weld Int. 2011;25(5):389–396. doi: 10.1080/09507116.2011.554234
- Harati E, Karlsson L, Svensson LE, et al. The relative effects of residual stresses and weld toe geometry on fatigue life of weldments. Int J Fatigue. 2015;77:160–165. doi: 10.1016/j.ijfatigue.2015.03.023
- Alipooramirabad H, Paradowska A, Nafisi S, et al. Post-weld heat treatment of API 5L X70 high strength low alloy steel welds. Materials. 2020;13(24):5801. doi: 10.3390/ma13245801
- Zhao MS, Chiew SP, Lee CK. Post weld heat treatment for high strength steel welded connections. J Constr Steel Res. 2016;122:167–177. doi: 10.1016/j.jcsr.2016.03.015
- American Society of Mechanical Engineers. BPVC section VIII - rules for construction of pressure vessels division 1. New York: ASME; 2023. Available from: https://www.asme.org/codes-standards/find-codes-standards/bpvc-viii-1-bpvc-section-viii-rules-construction-pressure-vessels-division-1
- Swedish Institute for Standards. Unfired pressure vessels – part 4: fabrication (SS-EN 13445-4:2021/A1:2023). SIS; 2023. Available from: https://www.sis.se
- Jorge JCF, Monteiro JLD, Gomes AJdC, et al. Influence of welding procedure and PWHT on HSLA steel weld metals. J Mater Res Technol. 2019;8(1):561–571. doi: 10.1016/j.jmrt.2018.05.007
- Kalyankar VD, Chudasama G. Effect of post weld heat treatment on mechanical properties of pressure vessel steels. Mater Today Proc. 2018;5(11):24675–24684. doi: 10.1016/j.matpr.2018.10.265
- Jorge JCF, Faragasso SM, Guimarães de Souza LF, et al. Effect of post-welding heat treatment on the mechanical and microstructural properties of extra high-strength steel weld metals, for application on mooring equipment. Weld Int. 2015;29(7):521–529. doi: 10.1080/09507116.2014.932984
- Jorge J, Souza L, Couto JS, et al. Influence of chemical composition on the mechanical properties of high strength steel weld metals for application in mooring components. Int J Eng Techn Res. 2016;4:71–76.
- Tomerlin D, Marić D, Kozak D, et al. Post-weld heat treatment of S690QL1 steel welded joints: influence on microstructure, mechanical properties and residual stress. Metals. 2023;13(5):999. doi: 10.3390/met13050999