Numerical studies of the influence of various geometrical features of a multispiked connecting scaffold prototype on mechanical stresses in peri-implant bone

References

• An Y, Draughn R, editors. 1999. Mechanical Testing of Bone and the Bone-Implant Interface. Boca Raton (FL): CRC Press.
   Google Scholar
• Bergmann G, Graichen F, Rohlmann A. 1993. Hip joint loading during walking and running, measured in two patients. J Biomech. 26(8):969–990.
   PubMed Web of Science ®Google Scholar
• Bergmann G, Graichen F, Rohlmann A. 1998. Loads Acting at the Hip Joint. In: Sedel L, Cabanela ME, editors. Hip Surgery: Materials and Developments: New Materials and Developments. London (UK). p. 1–8.
   Google Scholar
• Benzley SE, Perry E, Merkley K, Clark B. 1995. Comparison of All Hexagonal and All Tetrahedral Finite Element Meshes for Elastic and Elasto-plastic Analysis. 4th International Meshing Roundtable. Oct 16–17. Albuquerque (NM).
   Google Scholar
• Cowin S. 2001. Bone Mechanics Handbook, Boca Raton (FL): CRC Press.
   Google Scholar
• De Steiger RN, Miller LN, Prosser GH, Graves SE, Davidson DC, Stanford TE. 2010. Poor outcome of revised resurfacing hip arthroplasty: 397 cases from the Australian Joint Replacement Registry. Acta Orthopaedica. 81(1):72–76.
   PubMed Web of Science ®Google Scholar
• Fields AJ, Lee GL, Liu XS, Jekir MG, Guo XE, Keaveny TM. 2011. Influence of vertical trabeculae on the compressive strength of the human vertebra. J Bone Miner Res. 26 (2):263–9.
   PubMed Web of Science ®Google Scholar
• Geetha M, Singh AK, Asokamani R, Gogia AK. 2009. Ti based biomaterials, the ultimate choice for orthopaedic implants – A review. Progress in Materials Science. 54(3):397–425.
   Web of Science ®Google Scholar
• Graichen F. Bergmann G. Rohlmann A. 1999. Hip endoprosthesis for in vivo measurement of joint force and temperature. J Biomech. 32(10):1113–7.
   PubMed Web of Science ®Google Scholar
• Lee JS, Lim YJ. 2012. Three-dimensional numerical simulation of stress induced by different lengths of osseointegrated implants in the anterior maxilla. Comput Methods Biomech Biomed Engin. 16(11):1143–9.
   PubMed Web of Science ®Google Scholar
• Long M, Rack H. 1998. Titanium alloys in total joint replacement – A materials science perspective. Biomaterials. 19:1621–39.
   PubMed Web of Science ®Google Scholar
• Madry H, Niek van Dijk C, Mueller-Gerbl M. 2010. The basic science of the subchondral bone. Knee Surg Sports Traumatol Arthrosc. 18(4):419–33.
   PubMed Web of Science ®Google Scholar
• National Joint Registry: 14th Annual Report 2017. [accessed 2018 Feb 28] http://www.njrcentre.org.uk/njrcentre/Home/tabid/36/Default.aspx
   Google Scholar
• Pawlikowski M, Skalski K, Bańczerowski J, Makuch A, Jankowski K. 2017. Stress-strain characteristic of human trabecular bone based on depth sensing indentation measurements. Biocyber and Biomed Eng. 37(2):272–280.
   Web of Science ®Google Scholar
• Ramos A, Simões, JA. 2006. Tetrahedral versus hexahedral finite elements in numerical modelling of the proximal femur, Med Eng & Phys. 28(9):916–924.
   PubMed Web of Science ®Google Scholar
• Ratner BD, Hoffman AS, Schoen FJ, Lemons JE, editors. 2012. Biomaterials Science: An introduction to materials in medicine. 3rd edition, Academic Press.
   Google Scholar
• Rogala P. Endoprosthesis. EU Patent nr EP072418 B1, 22 December 1999.
   Google Scholar
• Rogala P. Acetabulum Endoprosthesis and Head. U.S. Patent US5911759 A, 15 June 1999.
   Google Scholar
• Rogala P. Method and endoprosthesis to apply this implantation. Canadian Patent nr 2,200,064, 1 April 2002.
   Google Scholar
• dos Santos MBF, Meloto GO, Bacchi A, Correr-Sobrinho L. 2017. Stress distribution in cylindrical and conical implants under rotational micromovement with different boundary conditions and bone properties: 3-D FEA, Comput Methods Biomech Biomed Eng. 20:8, 893–900, DOI: 10.1080/10255842.2017.1309394
   PubMed Web of Science ®Google Scholar
• Tejszerska D, Świtoński E, Gzik M. 2011. Biomechanika narządu ruchu człowieka: praca zbiorowa [Biomechanics of human musculoskeletal system: collectiva work]. Katedra Mechaniki Stosowanej, Wydział Mechaniczno-Technologiczny, Politechnika Śląska.
   Google Scholar
• Tsouknidas A, Maliaris G, Savvakis S, Michailidis N. 2015. Anisotropic post-yield response of cancellous bone simulated by stress-strain curves of bulk equivalent structures. Comput Methods Biomech Biomed Eng. 18(8):839–46.
   PubMed Web of Science ®Google Scholar
• Uklejewski R, Winiecki M, Rogala P, Mielniczuk J. 2010. Projektowanie i kształtowanie przyrostowe minimalnie inwazyjnej endoprotezy powierzchniowej stawu biodrowego z wieloszpilkowym rusztowaniem łączącym [Design and rapid prototyping of low-invasive hip resurfacing arthroplasty endoprosthesis with connecting scaffold]. Mechanik. (83)7:464–467
   Google Scholar
• Uklejewski R, Winiecki M, Rogala P, Mielniczuk J. 2011. Selective laser melted prototype of original minimally invasive hip endoprosthesis, Rapid Prototyping J. 17(1):76–85.
   Web of Science ®Google Scholar
• Uklejewski R, Winiecki M, Radomski W. 2013. Computer aided evaluation of poroaccessibility of porous coatings outer layer on intra-osseous implants. Metrol & Measur Sys. 20:427–438.
   Web of Science ®Google Scholar
• Uklejewski R, Rogala P, Winiecki M, Kędzia A, Ruszkowski P. 2013. Preliminary Results of Implantation in Animal Model and Osteoblast Culture Evaluation of Prototypes of Biomimetic Multispiked Connecting Scaffold for Noncemented Stemless Resurfacing Hip Arthroplasty Endoprostheses. Biomed Research Int. doi: 10.1155/2013/689089.
   PubMed Web of Science ®Google Scholar
• Uklejewski R, Winiecki M, Rogala P. 2014. Technological issues of additive manufacturing of preprototypes of the multispiked connecting scaffold for non-cemented resurfacing arthroplasty endoprostheses. Eng of Biomat, 17(128–129):81–82.
   Google Scholar
• Uklejewski R, Rogala P, Winiecki M, Tokłowicz R, Ruszkowski P, Wołuń-Cholewa M. 2016. Biomimetic Multispiked Connecting Ti-Alloy Scaffold Prototype for Entirely-Cementless Resurfacing Arthroplasty Endoprostheses–Exemplary Results of Implantation of the Ca-P Surface-Modified Scaffold Prototypes in Animal Model and Osteoblast Culture Evaluation. Materials. 9(7):532. doi:10.3390/ma9070532.
   Web of Science ®Google Scholar
• Uklejewski R, Winiecki M, Rogala P, Patalas A. 2017. Structural-Geometric Functionalization of the Additively Manufactured Prototype of Biomimetic Multispiked Connecting Ti-Alloy Scaffold for Entirely Noncemented Resurfacing Arthroplasty Endoprostheses. App Bionics & Biomech. doi:10.1155/2017/5638680
   PubMed Web of Science ®Google Scholar
• Villegas DF, Hansen TA, Liu DF, Donahue TL. 2008. A quantitative study of the microstructure and biochemistry of the medial meniscal horn attachments. Ann Biomed Eng. 36(1):123–31.
   PubMed Web of Science ®Google Scholar
• 14242-1. 2012. Implants for surgery – Wear of total hip-joint prostheses – Part 1. International Organization for Standardization.
   Google Scholar