An experimental investigation to evaluate the performance of bio-inspired structured tools during machining of AISI 316 L steel

References

• Ranjan P, Hiremath SS. Role of textured tool in improving machining performance: a review. J Manuf Process. 2019;43:47–73. doi: 10.1016/j.jmapro.2019.04.011
   Web of Science ®Google Scholar
• Kim DM, Bajpai V, Kim BH, et al. Finite element modeling of hard turning process via a micro-textured tool. Int J Adv Manuf Technol. 2015;78(9–12):1393–1405. doi: 10.1007/s00170-014-6747-x
   Web of Science ®Google Scholar
• Roushan A, Chetan C. Influence of laser parameters on the machining performance of textured cutting tools. Opti Laser Technol. 2023;165:109569. doi: 10.1016/j.optlastec.2023.109569
   Web of Science ®Google Scholar
• Wu F, Zhang N, Peng W, et al. A novel hybrid micro-texture for improving the wear resistance of PCD tools on cutting SiCp/Al composites. J Manuf Process. 2023;101:930–942. doi: 10.1016/j.jmapro.2023.06.027
   Web of Science ®Google Scholar
• Ahmed YS, Paiva JM, Arif AFM, et al. The effect of laser micro-scale textured tools on the tool-chip interface performance and surface integrity during austenitic stainless-steel turning. Appl Surf Sci. 2020;510:145455. doi: 10.1016/j.apsusc.2020.145455
   Web of Science ®Google Scholar
• Saraf G, Nirala CK. Novel texture pattern on WC inserts fabricated using reverse-μEDM for enhanced cutting of Ti6Al4V. Manuf Lett. 2023;36:72–75. doi: 10.1016/j.mfglet.2023.04.001
   Google Scholar
• Kumar VU, Raj DS. Performance analysis of tools with rake face textures produced using wire-EDM in turning AISI4340. Mater Manuf Process. 2021;36(10):1146–1160. doi: 10.1080/10426914.2021.1905826
   Web of Science ®Google Scholar
• Gajrani KK, Reddy RPK, Sankar MR. Experimental comparative study of conventional, micro-textured and coated micro-textured tools during machining of hardened AISI 1040 alloy steel. Int J Mach Mach Mater. 2016;18:522–539. doi: 10.1504/IJMMM.2016.078982
   Google Scholar
• Ranjan P, Hiremath SS. An experimental investigation on bio-inspired structure position variation on tool surface during turning of difficult to machine materials. J Mater Eng Perform. 2023. doi: 10.1007/s11665-023-08329-y
   Google Scholar
• Rajbongshi SK, Sarma DK. Performance parameters studies in machining of AISI D2 steel with dot-textured, groove-textured & non-textured cutting tool at the flank face. Int J Refract Met Hard Mater. 2019;83:104970. doi: 10.1016/j.ijrmhm.2019.104970
   Web of Science ®Google Scholar
• Fatima A, Mativenga PT. Performance of flank face structured cutting tools in machining of AISI/SAE 4140 over a range of cutting speeds. Proc Inst Mech Eng Part B. 2016;230:3–18. doi: 10.1177/0954405414555589
   Web of Science ®Google Scholar
• Malshe AP, Bapat S, Rajurkar KP, et al. Bio-inspired textures for functional applications. CIRP Ann. 2018;67(2):627–650. doi: 10.1016/j.cirp.2018.05.001
   Web of Science ®Google Scholar
• Li X, Deng J, Lu Y, et al. Tribological behavior of ZrO2/WS2 coating surfaces with biomimetic shark-skin structure. Ceram Int. 2019;45:21759–21767. doi: 10.1016/j.ceramint.2019.07.177
   Web of Science ®Google Scholar
• Guo Y, Cui X, Guo J. Biomimetic integration of MQL and tool surface microstructure in intermittent machining. Int J Adv Manuf Technol. 2020;111:1847–1861. doi: 10.1007/s00170-020-06247-0
   Web of Science ®Google Scholar
• Li X, Deng J, Lu Y, et al. Machinability investigation and sustainability assessment of dry cutting AISI1045 steel using tools configured with shark-skin-inspired structures and WS2/C coatings. Int J Precis Eng Manuf Green Technol. 2021;9(1):83–106. doi: 10.1007/s40684-021-00330-x
   Web of Science ®Google Scholar
• Chen L, Zhang Y, Cui Y, et al. Effects of snake-bioinspired surface texture on the finger-sealing performance under varied working conditions. Machines. 2022;10(7):569. doi: 10.3390/machines10070569
   Web of Science ®Google Scholar
• Ivanović L, Vencl A, Stojanović B, et al. Biomimetics design for tribological applications. Tribol Ind. 2018;40(3):448–456. doi: 10.24874/ti.2018.40.03.11
   Google Scholar
• Ranjan P, Hiremath SS. Influence of texture parameters of the bio-inspired crescent textured tool on machining performance of martensitic stainless steel. CIRP J Manuf Sci Technol. 2022;39:70–90. doi: 10.1016/j.cirpj.2022.07.008
   Web of Science ®Google Scholar
• Vasumathy D, Meena A. Influence of micro scale textured tools on tribological properties at tool-chip interface in turning AISI 316 austenitic stainless steel. Wear. 2017;376:1747–1758. doi: 10.1016/j.wear.2017.01.024
   Web of Science ®Google Scholar
• Gupta MK, Song Q, Liu Z, et al. Tribological behavior of textured tools in sustainable turning of nickel based super alloy. Tribol Int. 2021;155:106775. doi: 10.1016/j.triboint.2020.106775
   Web of Science ®Google Scholar
• Sivaiah P, Bodicherla U. Effect of surface texture tools and minimum quantity lubrication (MQL) on tool wear and surface roughness in CNC turning of AISI 52100 steel. J Inst Eng (India): C. 2020;101:85–95. doi: 10.1007/s40032-019-00512-2
   Google Scholar
• Hernández YS, Vilches FJT, Gamboa CB, et al. Experimental parametric relationships for chip geometry in dry machining of the Ti6Al4V alloy. Materials. 2018;11(7):1260. doi: 10.3390/ma11071260
   PubMed Web of Science ®Google Scholar