Antimicrobial films containing microparticles for the enhancement of long-term sustained release

References

• Brannan DK. Cosmetic preservation. J Soc Cosmet Chem 1995;46:199–200
   Web of Science ®Google Scholar
• Brul S, Coote P. Preservative agents in foods. Mode of action and microbial resistance mechanisms. Int J Food Microbiol 1999;50:1–17
   PubMed Web of Science ®Google Scholar
• Bean HS. Preservatives for pharmaceuticals. J Soc Cosmet Chem 1972;23:703–20
   Web of Science ®Google Scholar
• Perrenoud D, Bircher A, Hunziker T, et al. Frequency of sensitization to 13 common preservatives in Switzerland. Contact Dermatitis 1994;30:276–9
   PubMed Web of Science ®Google Scholar
• Hong J, Bielory L. Allergy to ophthalmic preservatives. Curr Opin Allergy Clin Immunol 2009;9:447–53
   PubMed Web of Science ®Google Scholar
• Bleasel N, Tate B, Rademaker M. Allergic contact dermatitis following exposure to essential oils. Australas J Dermatol 2002;43:211–3
   PubMedGoogle Scholar
• Goossens A, Beck MH, Haneke E, et al. Adverse cutaneous reactions to cosmetic allergens. Contact Dermatitis 1999;40:112–3
   PubMed Web of Science ®Google Scholar
• Varvaresou A, Papageorgiou S, Tsirivas E, et al. Self-preserving cosmetics. Int J Cosmet Sci 2009;31:163–75
   PubMedGoogle Scholar
• Lucchini JJ, Corre J, Cremieux A. Antibacterial activity of phenolic compounds and aromatic alcohols. Res Microbiol 1990;141:499–510
   PubMed Web of Science ®Google Scholar
• Corre J, Lucchini JJ, Mercier GM, Cremieux A. Antibacterial activity of phenethyl alcohol and resulting membrane alterations. Res Microbiol 1990;141:483–97
   PubMed Web of Science ®Google Scholar
• Silver S, Wendt L. Mechanism of action of phenylethyl alcohol: breakdown of the cellular permeability barrier. J Bacteriol 1967;93:560–6
   PubMed Web of Science ®Google Scholar
• Han JH. Antimicrobial food packaging. Food Technol 2000;54:56–65
   Web of Science ®Google Scholar
• Ahvenainen R, Hurme E. Active and smart packaging for meeting consumer demands for quality and safety. Food Addit Contam 1997;14:753–63
   PubMed Web of Science ®Google Scholar
• Vermeiren L, Devlieghere F, Debevere J. Effectiveness of some recent antimicrobial packaging concepts. Food Addit Contam 2002;19:163–71
   PubMed Web of Science ®Google Scholar
• Appendini P, Hotchkiss JH. Review of antimicrobial food packaging. Innov Food Sci Emerg Technol 2002;3:113–26
   Google Scholar
• Scriven LE. Physics and applications of dip coating and spin coating. Mater Res Soc Symp Proc 1988;121:717–29
   Google Scholar
• Suppakul P, Miltz J, Sonneveld K, Bigger SW. Active packaging technologies with an emphasis on antimicrobial packaging and its applications. J Food Sci 2003;68:408–20
   Web of Science ®Google Scholar
• Han JH, Floros JD. Modeling antimicrobial activity loss of potassium sorbate against Baker’s yeast after heat process to develop antimicrobial food packaging materials. Food Sci Biotechnol 1999;8:11–14
   Google Scholar
• Appendini P, Hotchkiss J. Immobilization of lysozyme on food contact polymers as potential antimicrobial films. Packag Technol Sci 1997;10:271–9
   Google Scholar
• Choi JH, Choi WY, Cha DS, et al. Diffusivity of potassium sorbate in K-carrageenan based antimicrobial film. LWT–Food Sci Technol 2005;38:417–23
   Web of Science ®Google Scholar
• Danese PN. Antibiofilm approaches: prevention of catheter colonization. Chem Biol 2002;9:873–80
   PubMed Web of Science ®Google Scholar
• Li Z, Lee D, Sheng X, et al. Two-level antibacterial coating with both release-killing and contact-killing capabilities. Langmuir 2006;22:9820–3
   PubMed Web of Science ®Google Scholar
• Ofori-Kwakye K, Fell JT. Biphasic drug release from film-coated tablets. Int J Pharm 2003;250:431–40
   PubMed Web of Science ®Google Scholar
• Marvola M, Nykanen P, Rautio S, et al. Enteric polymers as binders and coating materials in multiple-unit site-specific drug delivery systems. Eur J Pharm Sci 1999;7:259–67
   PubMed Web of Science ®Google Scholar
• Guiga W, Galland S, Peyrol E, et al. Antimicrobial plastic film: physico-chemical characterization and nisin desorption modeling. Innov Food Sci Emerg Technol 2009;10:203–7
   Web of Science ®Google Scholar
• An DS, Kim YM, Lee SB, et al. Antimicrobial low density polyethylene film coated with bacteriocins in binder medium. Food Sci Biotechnol 2000;9:14–20
   Google Scholar
• Sayanjali S, Ghanbarzadeh B, Ghiassifar S. Evaluation of antimicrobial and physical properties of edible film based on carboxymethyl cellulose containing potassium sorbate on some mycotoxigenic Aspergillus species in fresh pistachios. LWT–Food Sci Technol 2011;44:1133–8
   Web of Science ®Google Scholar
• Möller H, Grelier S, Pardon P, Coma V. Antimicrobial and physicochemical properties of chitosan-HPMC-based films. J Agric Food Chem 2004;52:6585–91
   PubMed Web of Science ®Google Scholar
• Lee CH, An DS, Park HJ, Lee DS. Wide-spectrum antimicrobial packaging materials incorporating nisin and chitosan in the coating. Packag Technol Sci 2003;16:99–106
   Web of Science ®Google Scholar
• Li M, Rouaud O, Poncelet D. Microencapsulation by solvent evaporation: state of the art for process engineering approaches. Int J Pharm 2008;363:26–39
   PubMed Web of Science ®Google Scholar
• Chanda M, Roy SK. Plastics technology handbook. Boca Raton: CRC Press; 2006;4:46
   Google Scholar
• Dash AK. Determination of the physical state of drug in microcapsule and microsphere formulations. J Microencapsul 1997;14:101–12
   PubMed Web of Science ®Google Scholar
• Kim BK, Hwang SJ, Park JB, Park HJ. Preparation and characterization of drug-loaded polymethacrylate microspheres by an emulsion solvent evaporation method. J Microencapsul 2002;19:811–22
   PubMed Web of Science ®Google Scholar
• Keary CM, Heeschen WA. Wet film dimensions of capsule walls during dip coating. Drug Dev Ind Pharm 2002;28:1059–76
   PubMed Web of Science ®Google Scholar
• Dislich H, Hussmann E. Amorphous and crystalline dip-coatings obtained from organo-metallic solutions: procedures, chemical processes and products. Thin Solid Films 1969;77:129–33
   Web of Science ®Google Scholar
• Brinker CJ, Frye GC, Hurd AJ, Ashley CS. Fundamentals of sol-gel dip-coating. Thin Solid Films 1991;201:97–108
   Web of Science ®Google Scholar
• Gugliemi M, Colombo P, Peron F, Mancinelli Degli Espoti L. Dependence of thickness on the withdrawal speed for SiO2 and TiO2 coatings obtained by dipping method. J Mater Sci 1992;27:5052–6
   Web of Science ®Google Scholar
• Grosso D. How to exploit the full potential of the dip-coating process to better control film formation. J Mater Chem 2011;21:17033–6
   Web of Science ®Google Scholar
• Radin S, Ducheyne P. Controlled release of vancomycin from thin sol–gel films on titanium alloy fracture plate material. Biomaterials 2007;28:1721–9
   PubMed Web of Science ®Google Scholar
• Sonawane RS, Kale BB, Dongare MK. Preparation and photo-catalytic activity of Fe–TiO2 thin films prepared by sol–gel dip coating. Mater Chem Phys 2004;85:52–7
   Web of Science ®Google Scholar
• Strawbridge I, James PF. The factors affecting the thickness of sol–gel derived silica coatings prepared by dipping. J Non-Cryst Solids 1986;86:381–93
   Web of Science ®Google Scholar
• Strawbridge I, James PF. Thin silica films prepared by dip coating. J Non-Cryst Solids 1986;82:366–72
   Web of Science ®Google Scholar
• Negishi N, Takeuchi K. Preparation of TiO2 thin film photocatalysis by dip-coating using a highly viscous solvent. J Sol-Gel Sci Technol 2001;22:23–31
   Web of Science ®Google Scholar
• Baqué L, Serquis A. Microstructural characterization of La0.4Sr0.6Co0.8Fe0.2O3-δ films deposited by dip coating. Appl Surf Sci 2007;254:213–18
   Web of Science ®Google Scholar
• Brinker CJ, Hurd AJ, Frye GC, et al. Sol–gel thin film formation. J Non-Cryst Solids 1990;121:294–302
   Web of Science ®Google Scholar
• Lii DF, Huang JL, Tsui LJ, Lee SM. Formation of BN films on carbon fibers by dip-coating. Surf Coat Technol 2002;150:269–76
   Web of Science ®Google Scholar
• Felton LA, McGinity JW. Influence of insoluble excipients on film coating systems. Drug Dev Ind Pharm 2002;28:225–43
   PubMed Web of Science ®Google Scholar
• Porter SC, Felton LA. Techniques to assess film coatings and evaluate film-coated products. Drug Dev Ind Pharm 2010;36:128–42
   PubMed Web of Science ®Google Scholar
• Ho L, Cuppok Y, Muschert S, et al. Effects of film coating thickness and drug layer uniformity on in vitro drug release from sustained-release coated pellets: a case study using terahertz pulsed imaging. Int J Pharm 2009;382:151–9
   PubMed Web of Science ®Google Scholar
• RamaRao P, Diwan PV. Formulation and in vitro evaluation of polymeric films of diltiazem HCl and indomethacin for transdermal administration. Drug Dev Ind Pharm 1998;24:327–36
   PubMed Web of Science ®Google Scholar
• Swain S, Behera UA, Beg S, et al. Design and characterization of enteric-coated controlled release mucoadhesive microcapsules of Rabeprazole sodium. Drug Dev Ind Pharm 2013;39:548–60
   PubMed Web of Science ®Google Scholar
• Mohamed FA, Roberts M, Seton L, et al. Film-coated matrix mini-tablets for the extended release of a water-soluble drug. Drug Dev Ind Pharm 2015;41:623–30
   PubMed Web of Science ®Google Scholar
• Yan C, Resau JH, Hewetson J, et al. Characterization and morphological analysis of protein loaded poly(lactide-co-glycolide) microparticles prepared by water-in-oil–in-water emulsion technique. J Control Release 1994;32:231–41
   Web of Science ®Google Scholar
• Spenlehauer G, Vert M, Benoit JP, et al. Biodegradable cisplatin microspheres prepared by the solvent evaporation method: morphology and release characteristics. J Control Release 1988;7:217–29
   Web of Science ®Google Scholar
• Spizzirri UG, Cirillo G, Curcio M, et al. Coated biodegradable casein nanospheres: a valuable tool for oral drug delivery. Drug Dev Ind Pharm 2015;29:1–12
   Web of Science ®Google Scholar
• Roy S, Pal M, Gupta BK. Indomethacin-loaded microspheres: design and preparation by a multiple-emulsification technique and their in vitro evaluation. Pharm Res 1992;9:1132–6
   PubMed Web of Science ®Google Scholar
• Gautier H, Guicheux J, Grimandi G, et al. In vitro influence of apatite-granule-specific area on human growth hormone loading and release. J Biomed Mater Res 1998;40:606–13
   PubMed Web of Science ®Google Scholar
• Das SK, Das NG. Preparation and in vitro dissolution profile of dual polymer (Eudragit™ RS100 and RL100) microparticles of diltiazem hydrochloride. J Microencapsul 1998;15:445–52
   PubMed Web of Science ®Google Scholar
• Ragnarsson G, Johansson MO. Coated drug cores in multiple unit preparations: influence of particle size. Drug Dev Ind Pharm 1988;14:2285–97
   Web of Science ®Google Scholar
• Siepmann F, Muschert S, Leclercq B, et al. How to improve the storage stability of aqueous polymeric film coatings. J Control Release 2008;126:26–33
   PubMed Web of Science ®Google Scholar
• Siepmann J, Ainaoui A, Vergnaud JM, Bodmeier R. Calculation of the dimensions of drug-polymer devices based on diffusion parameters. J Pharm Sci 1998;87:827–32
   PubMed Web of Science ®Google Scholar
• Vergnaud JM. Controlled drug release of oral dosage forms. London: Ellis Horwood; 1993
   Google Scholar