Osseointegrated Titanium Implants: Requirements for Ensuring a Long-Lasting, Direct Bone-to-Implant Anchorage in Man

References

• Adell R. Regeneration of the periodontium. Scand. J. Plast. Reconstr. Surg. 1974; 8: 11, Suppl.
   Google Scholar
• Adell R., Rockier B., Lekholm U., Brånemark P.-I. Osseointegrated implants in the treatment of edentulousness. A 15 year follow-up study. Int. J. Oral. Surg. 1981, Submitted for publication
   PubMedGoogle Scholar
• Albrektsson T., Brånemark P.-I., Eriksson A., Lindström J. The preformed autologous bone graft. Scand. J. Plast. Reconstr. Surg. 1978; 12: 215–223
   PubMed Web of Science ®Google Scholar
• Albrektsson T. Healing of bone grafts. Thesis. University of Gothenburg. 1979
   Google Scholar
• Amstutz H. C. Biomaterials for artificial joints. Orthop. Clin. North Am. 1973; 4: 235–241
   PubMedGoogle Scholar
• Anderson J. M., Green D. The cement-fibrous capsule-bone interface in aseptic loosening of total joint replacements. First World Biomaterials Congress 1980, Abstracts 2.4.1., Baden 1980
   Google Scholar
• Armitage J. E., Natiella J. R., Greene G. N., Jr., Meenaghan M. A. An evaluation of early bone changes after the insertion of metal endosseous implants into the jaws of rhesus monkeys. Oral. Surg. 1971; 32: 558–567
   PubMedGoogle Scholar
• Atmaram G. H., Mohammed H., Schoen F. J. Stress analysis of single-tooth implants. I. Effect of elastic parameters and geometry of implant. Biomater. Med. Devices Artif. Organs 1979; 7: 99–104
   PubMed Web of Science ®Google Scholar
• Babbusch C. A. Endosseous blade-vent implants: A research review. Oral. Implantol. 1973; 3: 261
   Google Scholar
• Babbusch C. A., Staikoff L. S. The scanning electron microscope and the endosteal blade-vent implant. Oral. Implantol. 1974; 4: 373–379
   PubMedGoogle Scholar
• Baumhammers A., Baumhammers I., Conway J. C. Scanning electron microscopy of blade-vent implants. Oral. Implantol. 1971; 2: 25–35
   PubMedGoogle Scholar
• Breine U., Brånemark P.-I. Reconstruction of alveolar jaw bone. Scand. J. Plast. Reconstr. Surg. 1980; 14: 23–48
   PubMed Web of Science ®Google Scholar
• Brettle J. A survey of the literature on metallic surgical implants. Injury 1970; 2: 26–33
   PubMedGoogle Scholar
• Brunski J. B., Moccia A. F., Jr., Pollack S. R., Korostoff E., Trachtenberg D. I. The influence of functional use of endosseous implants on the tissue-implant interface I. Histological aspects. J. Dent. Res. 1979; 58: 1953–1969
   PubMedGoogle Scholar
• Brånemark P.-I., Breine U., Adell R., Hansson B.-O., Lindström J., Ohlsson Å. Intraosseous anchorage of dental prostheses. I. Experimental studies. Scand. J. Plast. Reconstr. Surg. 1969; 3: 81–100
   PubMedGoogle Scholar
• Brånemark P.-I., Breine U., Hallén O., Hansson B.-O., Lindström J. Repair of defects in the mandible. Scand. J. Plast. Reconstr. Surg. 1970; 4: 100–108
   PubMedGoogle Scholar
• Brånemark P.-I., Lindström J., Hallén O., Breine U., Jeppsson P.-H., Öhman A. Reconstruction of the defective mandible. Scand. J. Plast. Reconstr. Surg. 1975; 9: 116–128
   PubMed Web of Science ®Google Scholar
• Brånemark P.-I., Hansson B.-O., Adell R., Breine U., Lindström J., Hallén O., Öhman A. Osseointegrated implants in the treatment of the edentulous jaw. Scand. J. Plast. Reconstr. Surg. 1977; 11: 16, Suppl.
   Google Scholar
• Brånemark P.-I., Albrektsson T. Titanium implants permanently penetrating human skin. Scand. J. Plast. Reconstr. Surg. 1981, Submitted for publication
   PubMedGoogle Scholar
• Busceni P., Hench L. An immersion process for coating metal implants with Bioglass. An investigation of bonding mechanisms of the interface of a prosthetic material. U.S. Army Medical Research and Development Command. 1976, Report No. 7, 55
   Google Scholar
• Cameron H. U., Pilliar R. M., MacNab I. The effect of movement on the bonding of porous metal to bone. J. Biomed. Mater. Res. 1973; 7: 301–309
   PubMed Web of Science ®Google Scholar
• Charnley J. The nine and ten year results of low-friction arthroplasty of the hip. Clin. Orthop. 1973; 95: 9–25
   PubMed Web of Science ®Google Scholar
• Clarke E. G.C., Hickmann J. An investigation into the correlation between the electrical potentials of metals and their behaviour in biological fluids. J. Bone Joint Surg. 1953; 35: 467–476
   Google Scholar
• Collins D. H. Tissue changes in human femurs containing plastic appliances. J. Bone Joint Surg. 1954; 36-B: 458–467
   Google Scholar
• Cook H. P. Immediate reconstruction of the mandible by metallic implant following resection for neoplasm. Ann. R. Coll. Surg. Engl. 1967; 42: 233–239
   Google Scholar
• Costich E. R., Youngblood B. J., Walden J. M. A study of the effects of high speed rotatory instruments on bone repair in dogs. Oral. Surg. 1964; 17: 563–571
   PubMedGoogle Scholar
• Driskell T. D. Comment in discussion. Proc. Symposium on dental biomaterials and research priorities. DHEW publication 1973; 65B: 226, 74
   Google Scholar
• Ducheyne P., Hench L., Kagan I I.A., Martens M., Mulier J. Short term bonding behaviour of bioglass coatings on metal substrate. Arch. Orthop. Traumat. Surg. 1979; 94: 155–160
   PubMedGoogle Scholar
• Emnéus H. Some aspects of osteosynthetic materials as a foreign body. Acta Orthop. Scand. 1967; 38: 368–372
   Google Scholar
• Emnéus H., Berg S. Some aspects on titanium as an implant material. Communications from Avesta Jernverk AB. Avesta, Sweden 1967
   Google Scholar
• Emnéus H., Gudmundsson G. Final report on the clinical testing of titanium. Acta Orthop. Scand. 1967; 38: 373
   Google Scholar
• Ferraro J. W. Experimental evaluation of ceramic, calcium phosphate as a substitute for bone grafts. Plast. Reconstr. Surg. 1979; 63: 634–640
   PubMedGoogle Scholar
• Fister J., Gross B. A histologic evaluation of bone response to burr cutting with and without water coolant. Oral. Surg. 1980; 49: 105–111
   PubMedGoogle Scholar
• Freeman J. W. Tissue response to varying surface finishes of titanium implants. South Carolina Dent. J. 1972; 30: 10
   PubMedGoogle Scholar
• Giro C. Precautions in utilizing blade implants. Oral. Implantol. 1974; 4: 104–109
   Google Scholar
• Griss P., Heimke G., Adrian-Werburg H., Von Krempien B., Reipa S., Lauterbach H. J., Hartung H. J. Morphological and biomechanical aspects of AI2O3 ceramic joint replacement. Experimental results and design considerations for human endoprosthesis. J. Biomed. Mater. Symp. 1975; 6: 177
   Google Scholar
• Grundschober F., Kellner G., Eschberger J., Plenck H., Jr. Long-term osseous anchorage of endosseous dental implants made of titanium and tantalum. First World Biomaterials Congress. 1980
   Google Scholar
• Hagert C.-G. Metacarpophalangeal joint implants. Diss. Göteborg. 1975
   Google Scholar
• Hille G. H. Titanium for surgical implants. J. Materials 1966; 1: 373–381
   Google Scholar
• Hobkirk J. A., Rusiniak T. Investigation of variable factors in drilling bone. J. Oral. Surg. 1977; 35: 968–973
   PubMedGoogle Scholar
• Homsy C. A., Kent J. N., Hinds E. C. Materials for oral implantation-biological and functional criteria. J. Am. Dent. Assoc. 1973; 86: 817
   PubMedGoogle Scholar
• Hughes A. N., Jordan B. A. The mechanical properties of surgical bone screws and some aspects of insertion practice. Injury 1973; 4: 25–38
   Web of Science ®Google Scholar
• Jacobs C. H., Berry J. T., Pope H. M., Hoaglund F. T. A study of the bone machining process-drilling. J. Biomech. 1976; 9: 343–349
   Google Scholar
• Jacobs H. G. Implantologie und Zahnersatz. Hanser, München 1976
   Google Scholar
• Jacobs H. G. Formgestaltung und Material-frage bei enossealen Implantaten zur Aufnahme von Zahnersatz. Dtsch. Zahnäntl Z. 1977; 36: 63–69
   Google Scholar
• Jacobs H. G. Zur Entwicklung der enossealen Implantologie. ZM Fortbildung 1979; 5: 254–260
   Google Scholar
• Jacobs C. H. Fundamental investigations of the bone cutting process. Proc. Bull Hosp. Joint Dis. 1977; 38: 4
   PubMedGoogle Scholar
• Jacobs R. L., Ray R. D. The effect of heat on bone healing. Arch. Surg. 1972; 104: 687–691
   PubMedGoogle Scholar
• Judet R., Sigvier M., Brumpt B., Indet T. A non-cemented total hip prosthesis. Clin. Orthop. 1978; 137: 76–84
   Google Scholar
• Juillerat D. A., Küffer F. Gewerbsreaktionen auf Titan-Hohlzylinderimplantate mit verschiedenen Oberflächen. Diss. Univ. Bern 1977. 1977
   Google Scholar
• Karagianes M. T., Westerman R. E., Rasmussen J. J., Lodmell A. N. Development and evaluation of porous dental implants in miniature swine. J. Dent. Res. 1976; 55: 85–88
   PubMedGoogle Scholar
• Klawitter J. J., Weinstein A. M. The status of porous materials to obtain direct skeletal attachment by tissue ingrowth. Acta Orthop. Belg. 1974; 40: 755–760
   PubMedGoogle Scholar
• Klawitter J. J., Weinstein A. M., Kent J., Farrell C., Bokros J. Microstructural analysis of LTI-carbon Dental implant interface. Trans. 4th annual meeting of the Society for Biomaterials, San Antonio, Texas, April 29-May 2, 1978
   Google Scholar
• Krause W. Bone cutting: Mechanical and thermal effects. Proc. Bull. Hosp. Joint. Dis. 1977; 38: 5
   PubMedGoogle Scholar
• Laing P. G., Ferguson A. B., Hodge E. S. Tissue reaction in rabbit muscle exposed to metallic implants. J. Biomed. Mater. Res. 1967; 1: 135–149
   PubMedGoogle Scholar
• Ledermann Ph. Stegprothetische Versorgung des Zahnlosen Unterkiefers mit Hilfe vom Plasmabeschichteten Titanschraubeimplantaten. Dtsch. Zahnärztl. Z. 1979; 34: 907–911
   PubMedGoogle Scholar
• Linder L., Lundskog J. Incorporation of stainless steel, titanium and vitallium in bone. Injury 1975; 6: 277–285
   PubMed Web of Science ®Google Scholar
• Linder L. Bone cement monomer. Thesis. University of Gothenburg. 1976
   Google Scholar
• Linder L. Tissue reaction to bone cement. Biocompatibility of orthopaedic implants, Vol. II, D. F. Williams, G. Winter. CRC Press. 1980, (In press) the Uniscience Series: Biocompatibility
   Google Scholar
• Lindström J., Brånemark P.-I., Albrektsson T. Mandibular reconstruction using the preformed autologous bone graft. Scand. J. Plast. Reconstr. Surg. 1981, In press
   Google Scholar
• Linkow L. I., Glassman P. E., Asnis S. T. Macroscopic and microscopic studies of endosteal blade-vent implants (Six month dog study). Oral. Implantol. 1973; 3: 281–283
   PubMedGoogle Scholar
• Linkow L. I., Chercheve R. Theories and techniques of oral implantology. C. V. Mosby Co., St. Louis 1970
   Google Scholar
• Lord G. A., Hardy J. R., Kummer F. J. An uncemented total hip replacement. Experimental study and review of 300 Madreporique arthroplasties. Clin. Orthop. 1979; 141: 2–16
   PubMed Web of Science ®Google Scholar
• Matthews L. S., Hirsch C. M. Temperature measured in human cortical bone when drilling. J. Bone Joint Surg. 1972; 54-A: 297–308
   Google Scholar
• McQuillian A. D., McQuillian M. K. Metallurgy of the rarer metals. 4: Titanium. Butterworths, London 1956
   Google Scholar
• Moss R. W. Histopathologic reaction of bone to surgical trauma. Oral. Surg. 1964; 17: 405–414
   PubMedGoogle Scholar
• Muster D., Champy M. Le Problème d'interface os-biomatériaux. Actualités Odonto-Stomat. 1978; 121: 109–124
   Google Scholar
• Nixon J. Clinical observations of cortical and medullary bone regeneration surrounding the Linkow blade-vent implant. Oral. Implantol. 1975; 5: 370–375
   Google Scholar
• Pallan F. G. Histologic changes in bone after insertion of skeletal fixation pins. J. Oral. Surg. 1960; 18: 400–408
   PubMedGoogle Scholar
• Plenk H., Jr, Eschberger J., Grundschober F., Knahr K. Long-term histologic observation on polyacrylic hip arthroplasties (Judet). First World Biomaterials Congress, Baden 1980; 1.9, 1980
   Google Scholar
• Predecki P., Auslaender B. A., Stephan J. E., Mooney V. L., Stanitski C. Attachment of bone to threaded implants by ingrowth and mechanical interlocking. J. Biomed. Mater. Res. 1972; 6: 401–412
   PubMed Web of Science ®Google Scholar
• Ring P. A. Five to fourteen year interim results of uncemented total hip arthroplasty. Clin. Orthop. 1978; 137: 87–95
   Google Scholar
• Ritter H., Dege V., Kuppa R. Initial experience with a total knee prosthesis implanted without bone cement. Acta Orthop, Traumat. Surg. 1979; 95: 89–93
   PubMedGoogle Scholar
• Salzer M., Knahr K., Locke H., Stark N., Matejovsky Z., Plenk H., Jr., Punzet G., Zweymüller K. A bioceramic endoprosthesis for the replacement of the proximal humerus. Arch. Orthop. Traumat. Surg. 1979; 93: 169–184
   PubMedGoogle Scholar
• Schatzker J. G., Home J. G., Sumner-Smith G. The effect of movement on the holding power of screws in bone. Clin. Orthop. 1975; 111: 257–262
   Google Scholar
• Schider S., Pflüger G., Plenk H., Jr., Böhler N., Grundschober F. Tantalum and niobium as potential prosthetic materials. First World Biomaterials Congress, Baden 1980; 3.6.5, 1980
   Google Scholar
• Schroeder A., Pohler O., Sutler F. Gewebsreaktion auf ein Titan-Hohlzylinderimplantat mil Titan-Spritzschichtoberfläche. Schweiz Mschr. Zahnheilk. 1976; 86: 713–725
   PubMedGoogle Scholar
• Schroeder A., Stich H., Straumann F., Sutter F. Über die Anlagerung von Osteozement an einen belasteten Implantatkörper. Schweiz. Mschr. Zahnheilk. 1978; 88: 1051–1058
   PubMedGoogle Scholar
• Solar R. J., Pollack S. R., Korostoff E. In vitro corrosion testing of titanium surgical implant alloys: An approach to understanding titanium release from implants. J. Biomed. Mater. Res. 1979; 12: 217
   Google Scholar
• Southam J. C., Chir B., Selwyn P. Structural changes around screws used in the treatment of fractured human mandibles. Brit. J. Oral. Surg. 1970; 8: 211–221
   Google Scholar
• Spurr A. R. Low-viscosity epoxy resin embedding medium for electron microscopy. J. Ultrastruct. Res. 1962; 26: 31
   Google Scholar
• Swanson A. B. Flexible implant resection arthroplasty in the hand and extremities. Mosby, Saint Louis 1973
   Google Scholar
• Swanson A. B., Freeman M. A. R. The tissue response to total joint replacement prostheses. The scientific basis of joint replacement. Pitman Medical, Tunbridge WellsEngland 1977
   Google Scholar
• Tjellström A., Lindström J., Albrektsson T., Brånemark P.-I., Hallén O. A clinical pilot study on preformed autologous ossicles. I. Acta Otolaryng. (Stockh.) 1978a; 85: 33–39
   PubMed Web of Science ®Google Scholar
• Tjellström A., Lindström J., Albrektsson T., Brånemark P.-I., Hallén O. A clinical pilot study on preformed autologous ossicles. II. Acta Otolaryng. (Stockh.) 1978b; 85: 232–242
   PubMedGoogle Scholar
• Tjellström A., Lindström J., Nylén O., Albrektsson T., Brånemark P.-I. The bone-anchored auricular epistehesis. Laryngoscope 1981a, In press
   PubMedGoogle Scholar
• Tjellström A., Lindström J., Hallén O., Albrektsson T., Brånemark P.-L. Osseointegrated titanium implants in the temporal bone. A clinical study on bone-anchored hearing aids. Am. J. Otol. 1981b, In press
   PubMedGoogle Scholar
• Thompson H. C. Effect of drilling into bone. J. Oral. Surg. 1958; 16: 22–30
   PubMedGoogle Scholar
• Uhthoff H. K. Mechanical factors influencing the holding power of screws in compact bone. J. Bone Joint Surg. 1973; 55-B: 633–641
   Google Scholar
• Weiss M. B. Development of an endosseous dental implant. Quintess int. 1977, No. 9: 10–11
   Google Scholar