385
Views
8
CrossRef citations to date
0
Altmetric
Research Article

Numerical Study on the Combustion Process of n-heptane Spray Flame in Methane Environment Using Large Eddy Simulation

, , , , , & show all
Pages 142-166 | Received 04 Nov 2018, Accepted 09 Aug 2019, Published online: 21 Aug 2019
 

ABSTRACT

Large eddy simulation is applied for the combustion process of n-heptane spray flame in methane environment. The influence of methane (CH4) concentration on the auto-ignition process and flame structures are discussed in detail. By increasing the CH4 concentration in the ambient gas, auto-ignition is delayed obviously at a low initial temperature because of the delayed first-stage ignition. While at a high temperature, the auto-ignition time is less influenced by the addition of CH4. However, after the addition of CH4, the concentration of the mixture where the high-temperature ignition is initialed becomes much richer and it is independent of the initial temperatures. In addition, the chemical explosive mode analysis (CEMA) method shows that the mixture in high-temperature regions is non-explosive without CH4 addition, and the abrupt transition between the explosive and non-explosive mixture at the tip of the reacting spray is observed by adding CH4 in the ambient gas, indicating that a flame front is developing downstream. This flame front exists for a long time at low CH4 concentration. The eigenvalue of the Jacobian matrix for the CH4/air mixture in the ambient gas is increased significantly with the addition of CH4, indicating that the combustion process is dominated by auto-ignition. Finally, results show that the development of the flame is accelerated by the addition of CH4 in the ambient gas.

Disclosure statement

We declare that we have no conflict of interest.

Additional information

Funding

The work is supported by National Natural Science Foundation of China (Grant No. 91741119, 51606133, 91641203) and Marine Low-Speed Engine Project (Phase I). The work was carried out at National Supercomputer Center in Tianjin, and the calculations were performed on TianHe-1 (A).

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.