181
Views
16
CrossRef citations to date
0
Altmetric
Original Articles

Uptake of Heavy Metals by Microorganisms

An Experimental Approach

, &
Pages 87-100 | Received 15 May 2001, Accepted 31 Aug 2003, Published online: 23 Feb 2007
 

Abstract

Contamination in drinking water is the most common form of environmental problems encountered in water resources management. Some contaminants, present accidentally in drinking water, are very difficult to remove, such as heavy elements that are products of industrial waste. Lead is one of the most difficult-to-remove elements. This paper proposes a novel process for removal of lead compounds contaminants from water. The proposed method shows great efficiency.

The technique uses thermophilic bacteria found in the United Arab Emirates near Al-Ain town located in Abu-Dhabi Emirates. These bacteria were isolated and used in a reactor coupled with a membrane system. The bacteria, the stirrer and the membrane housed in the reactor are arranged in a distinctive way to form the novel bio-stabilization process proposed in this research. This proposed technique could be used at low cost and with great confidence in the purification of drinking water. The system was found to be adequate for concentrations of lead in the range of 5–40 ppm. At the end of the operation the lead concentration reaches the level allowed by the World Health Organization regulations.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.