Role of pre-formed martensite on transformation of austempered ductile iron

ABSTRACT

A commercial ductile iron is treated by a novel austempering process to obtain a good combination of strength and ductility. The samples are austenitised at 890°C for 10 min, then quenched into patented quenching liquid, and austempered in an electric furnace at 220°C for 5, 10, 30, 60, 240 and 600 min, respectively, finally air cooled. The bending test and the tensile test are conducted and microstructural features are analysed on the austempered ductile iron. The optimum mechanical property is achieved at 220°C for 240 min. Main reason for high strength and ductility is the formation of a fine structure consisting of multiple phases of pre-formed martensite and lath bainitic ferrite with film retained austenite.

KEYWORDS:

• Austempering
• pre-formed martensite
• bainitic ferrite
• strength

ORCID

Chen Yang http://orcid.org/0000-0001-7492-4589

Acknowledgements

The authors would like to thank the Testing Center of Yangzhou University for providing support and help.

Disclosure statement

No potential conflict of interest was reported by the authors.