Role of pre-formed martensite on transformation of austempered ductile iron

References

• Dodd J. High strength, high ductility ductile irons. Mod Cast. 1978;68:60–66.
   Google Scholar
• Gundlach RB, Janowak JF. Development of a ductile iron for commercial austempering. AFS Trans. 1983;94:377–388.
   Google Scholar
• Harding RA. The production, properties and automotive applications of austempered ductile iron. Kov Mater Met Mater. 2007;45:1–16.
   Web of Science ®Google Scholar
• Dojcinovic M, Eric O, Rajnovic D, et al. Effect of austempering temperature on cavitation behaviour of unalloyed ADI material. Mater Charact. 2013;82:66–72. doi: 10.1016/j.matchar.2013.05.005
   Web of Science ®Google Scholar
• Doong JL, Ju FC, Chen HS, et al. Influence of austempering temperature on fracture toughness in bainitic nodular cast iron. J Mater Sci Lett. 1986;5:555–558. doi: 10.1007/BF01728689
   Google Scholar
• Aranzabal J, Gutierrez I, Rodriguez-Ibabe JM, et al. Influence of the amount and morphology of retained austenite on the mechanical properties of an austempered ductile iron. Metall Mater Trans A. 1997;28:1143–1156. doi: 10.1007/s11661-997-0280-6
   Web of Science ®Google Scholar
• Garin JL, Mannheim RL. Strain-induced martensite in ADI alloys. J Mater Process Technol. 2003;143–144:347–351. doi: 10.1016/S0924-0136(03)00452-7
   Web of Science ®Google Scholar
• Panneerselvam S, Martis CJ, Putatunda SK, et al. An investigation on the stability of austenite in austempered ductile cast iron (ADI). Mater Sci Eng A. 2015;626:237–246. doi: 10.1016/j.msea.2014.12.038
   Web of Science ®Google Scholar
• Sohi MH, Ahmadabadi MN, Vahdat AB. The role of austempering parameters on the structure and mechanical properties of heavy section ADI. J Mater Process Technol. 2004;153–154:203–208. doi: 10.1016/j.jmatprotec.2004.04.308
   Web of Science ®Google Scholar
• Ahmadabadi MN, Ghasemi HM, Osia M. Effects of successive austempering on the tribological behavior of ductile cast iron. Wear. 1999;231:293–300. doi: 10.1016/S0043-1648(99)00163-5
   Web of Science ®Google Scholar
• Toktaş G, Tayanç M, Toktaş A. Effect of matrix structure on the impact properties of an alloyed ductile iron. Mater Charact. 2006;57:290–299. doi: 10.1016/j.matchar.2006.02.008
   Web of Science ®Google Scholar
• Hamid AS, Elliott R. Austempering of an Mn–Mo–Cu alloyed ductile iron part 1-austempering kinetics and processing window. Mater Sci Technol. 1996;12:679–690. doi: 10.1179/mst.1996.12.8.679
   Web of Science ®Google Scholar
• Bartosiewicz L, Singh I, Alberts FA, et al. The influence of chromium on mechanical properties of austempered ductile cast iron. J Mater Eng Perform. 1995;4:90–101. doi: 10.1007/BF02682710
   Web of Science ®Google Scholar
• Hsu CH, Lin KT. A study on microstructure and toughness of copper alloyed and austempered ductile irons. Mater Sci Eng A. 2011;528:5706–5712. doi: 10.1016/j.msea.2011.04.035
   Web of Science ®Google Scholar
• Balos S, Radisavljevic I, Rajnovic D, et al. Geometry, mechanical and ballistic properties of ADI material perforated plates. Mater Des. 2015;83:66–74. doi: 10.1016/j.matdes.2015.05.081
   Web of Science ®Google Scholar
• Ahmadabadi MN, Ohide T, Niyama E. Effects of successive-stage austempering on the structure and impact strength of high-Mn ductile iron. Cast Met. 1992;5:62–72. doi: 10.1080/09534962.1992.11819094
   Google Scholar
• Ahmadabadi MN, Niyama E, Ohide T. Structural control of 1% Mn ADI aided by modeling of microsegregation. AFS Trans. 1994;102:269–278.
   Google Scholar
• Bayati H, Elliott R. A stepped austempering heat treatment for a Mn alloyed ductile cast iron. Adv Mater Res. 1997;4-5:399–406. doi: 10.4028/www.scientific.net/AMR.4-5.399
   Google Scholar
• Putatunda SK. Development of austempered ductile cast iron (ADI) with simultaneous high yield strength and fracture toughness by a novel two-step austempering process. Mater Sci Eng A. 2001;315:70–80. doi: 10.1016/S0921-5093(01)01210-2
   Web of Science ®Google Scholar
• Putatunda SK. Comparison of the mechanical properties of austempered ductile cast iron (ADI) processed by conventional and step-down austempering process. Mater Manuf Processes. 2010;25:749–757. doi: 10.1080/10426910903367394
   Web of Science ®Google Scholar
• Yang JH, Putatunda SK. Influence of a novel two-step austempering process on the strain-hardening behavior of austempered ductile cast iron (ADI). Mater Sci Eng A. 2004;382:265–279. doi: 10.1016/j.msea.2004.04.076
   Web of Science ®Google Scholar
• Caballero FG, Bhadeshia HKDH. Very strong bainite. Curr Opin Solid State Mater Sci. 2004;8:251–257. doi: 10.1016/j.cossms.2004.09.005
   Web of Science ®Google Scholar
• Beladi H, Timokhina IB, Xiong XY, et al. A novel thermomechanical approach to produce a fine ferrite and low-temperature bainitic composite microstructure. Acta Mater. 2013;61:7240–7250. doi: 10.1016/j.actamat.2013.08.029
   Web of Science ®Google Scholar
• Liu C, Yang C, Cui XX, et al. Bending property of ductile cast iron by a novel austempering. Trans Mater Heat Treat. 2016;37:22–25.
   Google Scholar
• Yang C, Cui XX, Zhao ZB, et al. Role of bulky retained austenite in austempered ductile iron. Adv Mater Res. 2017;1142:19–22. doi: 10.4028/www.scientific.net/AMR.1142.19
   Google Scholar
• Gong W, Tomota Y, Harjo S, et al. Effect of prior martensite on bainite transformation in nanobainite steel. Acta Mater. 2015;85:243–249. doi: 10.1016/j.actamat.2014.11.029
   Web of Science ®Google Scholar
• Martis CJ, Putatunda SK, Boileau J. Processing of a new high strength high toughness steel with duplex microstructure (ferrite+austenite). Mater Des. 2013;46:168–174. doi: 10.1016/j.matdes.2012.10.017
   Web of Science ®Google Scholar
• Ductile iron data for design engineers. Montreal, Canada: QIT-Fer et Titane and Miller & Company; 1990.
   Google Scholar
• Rajnovic D, Balos S, Sidjanin L, et al. Tensile properties of ADI material in water and gaseous environments. Mater Charact. 2015;101:26–33. doi: 10.1016/j.matchar.2015.01.001
   Web of Science ®Google Scholar
• Yang J, Putatunda SK. Improvement in strength and toughness of austempered ductile cast iron by a novel two-step austempering process. Mater Des. 2004;25:219–230. doi: 10.1016/j.matdes.2003.09.021
   Web of Science ®Google Scholar
• Zhang N, Zhang JW, Lu LT, et al. Wear and friction behavior of austempered ductile iron as railway wheel material. Mater Des. 2016;89:815–822. doi: 10.1016/j.matdes.2015.10.037
   Web of Science ®Google Scholar
• Elsayed AH, Megahed MM, Sadek AA, et al. Fracture toughness characterization of austempered ductile iron produced using both conventional and two-step austempering processes. Mater Des. 2009;30:1866–1877. doi: 10.1016/j.matdes.2008.09.013
   Web of Science ®Google Scholar
• Zhu KY, Chen H, Masse JP, et al. The effect of prior ferrite formation on bainite and martensite transformation kinetics in advanced high-strength steels. Acta Mater. 2013;61:6025–6036. doi: 10.1016/j.actamat.2013.06.043
   Web of Science ®Google Scholar
• Mallia J, Grech M, Smallman RE. Effect of silicon content on transformation kinetics of austempered ductile iron. Mater Sci Technol. 1998;14:452–460. doi: 10.1179/mst.1998.14.5.452
   Web of Science ®Google Scholar
• Toji Y, Matsuda H, Raabe D. Effect of Si on the acceleration of bainite transformation by pre-existing martensite. Acta Mater. 2016;116:250–262. doi: 10.1016/j.actamat.2016.06.044
   Web of Science ®Google Scholar
• Navarro-López A, Sietsma J, Santofimia MJ. Effect of prior athermal martensite on the isothermal transformation kinetics below Ms in a low-C high-Si steel. Metall Mater Trans. 2016;47:1028–1039. doi: 10.1007/s11661-015-3285-6
   Google Scholar
• Darwish N, Elliott R. Austempering of low manganese ductile irons part 3 variation of mechanical properties with heat treatment conditions. Mater Sci Technol. 1993;9:572–585. doi: 10.1179/mst.1993.9.7.572
   Web of Science ®Google Scholar
• Bayati H, Elliott R. Role of austenite in promoting ductility in an austempered ductile iron. Mater Sci Technol. 1997;13:319–326. doi: 10.1179/mst.1997.13.4.319
   Web of Science ®Google Scholar
• Ahmadabadi MN. A transmission electron microscope study of 1 pct Mn ductile iron with different austempering treatments. Metall. Mater. Trans A. 1998;29:2297–2306. doi: 10.1007/s11661-998-0107-0
   Web of Science ®Google Scholar
• Olivera E, Dragan R, Slavica Z, et al. Microstructure and fracture of alloyed austempered ductile iron. Mater Charact. 2016;57:211–217.
   Google Scholar