ABSTRACT
In order to lower the operating voltage of blue-phase liquid crystal display (BPLCD), a BPLCD with insulating protrusion, which is sandwiched between dual-layer electrodes, is proposed. There are four electrodes in this structure; thus, we investigate different driving methods to find a proper driving method. The effect of protrusion’s dielectric constant on operating voltage of the proposed BPLCD is explored under various electrodes’ parameters. As a result, the operating voltage of the proposed BPLCD with protrusion’s dielectric constant of 1,000 is 9.8 V, which is reduced by ~ 4.67× compared with that of conventional in-plane switching (IPS) BPLCD (45.8 V). Moreover, the zigzag electrode structure is adopted to reduce the large off-axis image distortion index. Besides, the azimuth distortion index is defined to describe the gamma shift between the minimum and maximum gamma shift curves at a certain polar angle. The results show that the off-axis image distortion index can be reduced to 0.0834, the azimuth distortion index is 0.0810 and the viewing cone of contrast ratio larger than 1,000:1 is over 50ºas the zigzag proposed BPLCD is used.
Graphical Abstract
![](/cms/asset/329eb445-e6cf-40ab-90a4-1522b72a831d/tlct_a_1512171_uf0001_c.jpg)
Acknowledgments
The authors would like to thank Haiwei Chen (Group of Prof. Shin-Tson Wu, University of Central Florida, USA) for the discussion.
Disclosure statement
No potential conflict of interest was reported by the authors.