Solid lipid nanoparticles by Venturi tube: preparation, characterization and optimization by Box–Behnken design

Abstract

In this study, a Venturi tube is proposed as an efficient static mixer incorporated into a continuous recirculation system for obtaining solid lipid nanoparticles (SLN) of monoolein. The device's operating principle consists of producing a turbulent flux in the throat of a Venturi tube. Taking advantage of this effect SLN of monoolein were obtained by rapid diffusion of the organic phase into the aqueous phase (stabilizer), causing lipid aggregation on the nanometric particles. The main aim of the present study was to evaluate the critical factors for obtaining the SLN of monoolein in order to control the independent variables of this methodology. A Box-Behnken design was used to study such independent variables (factors) as injection rate (X1), recirculation rate (X2), and stabilizer (X3) on the dependent variables; namely, process yield (Y1), particle size (Y2), polydispersity index (Y3) and zeta potential (Y4). The optimum operating conditions for preparing SLN were: injection rate, 1.6 mL/min; recirculation rate, 4.2 L/min; and stabilizer concentration, 1.0 w/v, with a value of D = 0.84. The predicted responses of the particle size were 212.0 nm, with a polydispersity index of 0.21, a zeta potential of −19.9 mV, and a process yield of 96.0%. Under the same operating condition, SLN formed with different lipids and stabilizers were obtained with nanometric size and zeta potential of ∼ −30.0 mV. Results show that the Venturi tube method is an innovative and versatile technique for preparing SLN of nanometric size with high process yields through a turbulent flow.

Keywords:

• Solid lipid nanoparticles
• Venturi tube
• solvent displacement
• monoolein
• experimental design

Disclosure statement

No potential conflict of interest was reported by the author(s).