Determining Gaseous Emission Factors and Driver’s Particle Exposures during Traffic Congestion by Vehicle-Following Measurement Techniques

Abstract

Vehicle gaseous emissions (NO, CO, CO₂, and hydrocarbon [HC]) and driver’s particle exposures (particulate matter <1 μm [PM₁], <2.5 μm [PM_2.5], and<10 μm [PM₁₀]) were measured using a mobile laboratory to follow a wide variety of vehicles during very heavy traffic congestion in Macao, Special Administrative Region, People’s Republic of China, an urban area having one of the highest population densities in the world. The measurements were taken with high time resolution so that fluctuations in the emissions can be seen readily during vehicle acceleration, cruising, deceleration, and idling. The tests were conducted in close proximity to the vehicles, with the inlet of a five-gas analyzer mounted on the front bumper of the mobile laboratory, and the distance between the vehicles was usually within several meters. To measure the driver’s particle exposures, the inlets of the particle analyzers were mounted at the height of the driver’s breathing position in the mobile laboratory, with the driver’s window open. A total of 178 and 113 vehicles were followed individually to determine the gaseous emission factor and the driver’s particle exposures, respectively, for motorcycle, passenger car, taxi, truck, and bus. The gaseous emission factors were used to model the roadside air quality, and good correlations between the modeled and monitored CO, NO₂, and nitrogen oxide (NO_x) verified the reliability of the experiments. Compared with petrol passenger cars and petrol trucks, diesel taxies and diesel trucks emitted less CO but more NO_x. The impact of urban canyons is shown to cause a significant increase in the PM₁ peak. The background concentrations contributed a significant amount of the driver’s particle exposures.