176
Views
0
CrossRef citations to date
0
Altmetric
Research Article

Experimental analysis of the volumetric and thermal efficiency performance of a novel direct piezo-acting CVVT mechanism

ORCID Icon, ORCID Icon, ORCID Icon, ORCID Icon, ORCID Icon, ORCID Icon & ORCID Icon show all
Pages 948-958 | Received 02 Feb 2023, Accepted 09 Jun 2023, Published online: 21 Jun 2023
 

ABSTRACT

In this study, a specifically designed direct-acting continuously variable valve timing mechanism was used to determine speed optimised valve timings for best volumetric efficiency of an engine. This mechanism basically consists of a piezo stack and a hydraulic magnifier integrated into it. To avoid effects of excessive vibrations on the piezo-stack, the engine was operated in a non-combustion mode. An electric motor was used to power the engine. Some system limitations of the hydraulic magnifier and the piezo-stack were the main challenges to a non-stop operation. A valve lift of approximately 4 mm, obtained with maximum applicable voltage of 600V to the piezo-stack, was referred to for comparison instead of the 7.6 mm original value. Tests were conducted for 30 inlet valve timing combinations at four different engine speeds from 1500 to 3000 rpm with 500 rpm increments. Timing pairs for the best VE were determined. They yielded 11.5% to 19.4% better volumetric efficiencies at 4mm lift than those obtained with the original valve timing of the cold engine. We also predicted 5-11.5% overall efficiency improvement, depending on engine type and operating conditions. Despite some practical challenges, better VE values have been obtained for a specific engine at varied speeds.    

Acknowledgments

We would like to thank TÜBİTAK for supporting the studies that form the basis of this paper within the scope of project no 216M241 granted under TÜBİTAK 1003 program. Also, we thank the Bursa Uludag University Faculty of Engineering for their support.

Disclosure statement

Financial support was provided by Scientific and Technological Research Council of Turkey.

Additional information

Funding

The work was supported by the Türkiye Bilimsel ve Teknolojik Araştırma Kurumu [216M241].

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.