![Sample our Engineering & Technology journals, sign in here to start your access, latest two full volumes FREE to you for 14 days]({"type":"image" , "src" : "/sda/5933/TOC-Subject-Sample-2021-Engineering-Tech.jpg"})
Abstract
In this paper, titanium oxide nanoparticles were produced using the hydrothermal method and embedded in PVA–alginate beads to remove Pb(II) ions from aqueous solutions. The kinetics of the photocatalyst process was elucidated by varying operating parameters such as pH (3, 7 and 10) and initial Pb(II) concentrations (25, 50, 100 and 200 mg/L). The findings revealed that 99.1% of the Pb(II) was removed within 150 min and maximum removal occurred in initial concentration of 25 mg/L at pH 7. The titania PVA-alginate beads can be readily isolated from the aqueous solutions after the photocatalytic process and reused for at least seven times without significant loss in their initial properties. In addition, the reduction of Pb(II) from wastewater using titania PVA-alginate beads fitted the Langmuir–Hinshelwood kinetic model with a correlation coefficient (R2) of 0.9931.